Download or read book The Deposition of AlN Thin Films Their Characterization and the Fabrication of Surface Acoustic Wave Devices written by Charlee Fansler and published by . This book was released on 2007 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Research in Pulsed Laser Deposition written by Liviu Duta and published by MDPI. This book was released on 2021-08-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its limitation in terms of surface covered area, the PLD technique still gathers interest among researchers by offering endless possibilities for tuning thin film composition and enhancing their properties of interest due to: (i) the easiness of a stoichiometric transfer even for very complex target materials, (ii) high adherence of the deposited structures to the substrate, (iii) controlled degree of phase, crystallinity, and thickness of deposited coatings, (iv) versatility of the experimental set-up which allows for simultaneous ablation of multiple targets resulting in combinatorial maps or consecutive ablation of multiple targets producing multi-layered structures, and (v) adjustment of the number of laser pulses, resulting in either a spread of nanoparticles, islands of materials or a complete covering of a surface. Moreover, a variation of PLD, known as Matrix Assisted Pulsed Laser Evaporation, allows for deposition of organic materials, ranging from polymers to proteins and even living cells, otherwise difficult to transfer unaltered in the form of thin films by other techniques. Furthermore, the use of laser light as transfer agent ensures purity of films and pulse-to-pulse deposition allows for an unprecedented control of film thickness at the nm level. This Special Issue is a collection of state-of-the art research papers and reviews in which the topics of interest are devoted to thin film synthesis by PLD and MAPLE, for numerous research and industry field applications, such as bio-active coatings for medical implants and hard, protective coatings for cutting and drilling tools withstanding high friction and elevated temperatures, sensors, solar cells, lithography, magnetic devices, energy-storage and conversion devices, controlled drug delivery and in situ microstructuring for boosting of surface properties.
Download or read book Acoustic Wave and Electromechanical Resonators written by Humberto Campanella and published by Artech House. This book was released on 2010 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book provides you with a comprehensive understanding of FBAR (thin-film bulk acoustic wave resonator), MEMS (microelectomechanical system), and NEMS (nanoelectromechanical system) resonators. For the first time anywhere, you find extensive coverage of these devices at both the technology and application levels. This practical reference offers you guidance in design, fabrication, and characterization of FBARs, MEMS and NEBS. It discusses the integration of these devices with standard CMOS (complementary-metal-oxide-semiconductor) technologies, and their application to sensing and RF systems. Moreover, this one-stop resource looks at the main characteristics, differences, and limitations of FBAR, MEMS, and NEMS devices, helping you to choose the right approaches for your projects. Over 280 illustrations and more than 130 equations support key topics throughout the book.
Download or read book Piezoelectricity Acoustic Waves and Device Applications written by Weiqiu Chen and published by World Scientific. This book was released on 2007 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers important subjects in the field of piezoelectric devices and applications with the latest research on piezoelectricity, acoustic waves, manufacturing technology, and design techniques. It includes up-to-date research and information on materials, new products, technological trends, and design methods of benefit to academics and researchers in the piezoelectric device industry. Contributors to this volume include prominent experts such as Clemens Ruppel of Epcos, Daining Fang of Tsinghua University, Tong-Yi Zhang of University of Science and Technology, Hong Kong, and CS Lam of TXC Corporation. A number of papers have been dedicated to Professor Harry F Tiersten of Resselear Polytechnic Institute, who passed away in 2006, for his contributions to the fundamental theory of piezoelectricity and methods for acoustic wave device analysis.
Download or read book Acoustic Waves written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2011-11-14 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of acoustic wave is a pervasive one, which emerges in any type of medium, from solids to plasmas, at length and time scales ranging from sub-micrometric layers in microdevices to seismic waves in the Sun's interior. This book presents several aspects of the active research ongoing in this field. Theoretical efforts are leading to a deeper understanding of phenomena, also in complicated environments like the solar surface boundary. Acoustic waves are a flexible probe to investigate the properties of very different systems, from thin inorganic layers to ripening cheese to biological systems. Acoustic waves are also a tool to manipulate matter, from the delicate evaporation of biomolecules to be analysed, to the phase transitions induced by intense shock waves. And a whole class of widespread microdevices, including filters and sensors, is based on the behaviour of acoustic waves propagating in thin layers. The search for better performances is driving to new materials for these devices, and to more refined tools for their analysis.
Download or read book Piezoelectricity Acoustic Waves And Device Applications Proceedings Of The 2006 Symposium written by Ji Wang and published by World Scientific. This book was released on 2007-09-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers important subjects in the field of piezoelectric devices and applications with the latest research on piezoelectricity, acoustic waves, manufacturing technology, and design techniques. It includes up-to-date research and information on materials, new products, technological trends, and design methods of benefit to academics and researchers in the piezoelectric device industry. Contributors to this volume include prominent experts such as Clemens Ruppel of Epcos, Daining Fang of Tsinghua University, Tong-Yi Zhang of University of Science and Technology, Hong Kong, and CS Lam of TXC Corporation. A number of papers have been dedicated to Professor Harry F Tiersten of Resselear Polytechnic Institute, who passed away in 2006, for his contributions to the fundamental theory of piezoelectricity and methods for acoustic wave device analysis.
Download or read book Acoustic Waves written by Don Dissanayake and published by BoD – Books on Demand. This book was released on 2010-09-28 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAW devices are widely used in multitude of device concepts mainly in MEMS and communication electronics. As such, SAW based micro sensors, actuators and communication electronic devices are well known applications of SAW technology. For example, SAW based passive micro sensors are capable of measuring physical properties such as temperature, pressure, variation in chemical properties, and SAW based communication devices perform a range of signal processing functions, such as delay lines, filters, resonators, pulse compressors, and convolvers. In recent decades, SAW based low-powered actuators and microfluidic devices have significantly added a new dimension to SAW technology. This book consists of 20 exciting chapters composed by researchers and engineers active in the field of SAW technology, biomedical and other related engineering disciplines. The topics range from basic SAW theory, materials and phenomena to advanced applications such as sensors actuators, and communication systems. As such, in addition to theoretical analysis and numerical modelling such as Finite Element Modelling (FEM) and Finite Difference Methods (FDM) of SAW devices, SAW based actuators and micro motors, and SAW based micro sensors are some of the exciting applications presented in this book. This collection of up-to-date information and research outcomes on SAW technology will be of great interest, not only to all those working in SAW based technology, but also to many more who stand to benefit from an insight into the rich opportunities that this technology has to offer, especially to develop advanced, low-powered biomedical implants and passive communication devices.
Download or read book Integrated Electronics on Aluminum Nitride written by Reet Chaudhuri and published by Springer Nature. This book was released on 2022-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis outlines the principles, device physics, and technological applications of electronics based on the ultra-wide bandgap semiconductor aluminum nitride. It discusses the basic principles of electrostatics and transport properties of polarization-induced two-dimensional electron and hole channels in semiconductor heterostructures based on aluminum nitride. It explains the discovery of high-density two-dimensional hole gases in undoped heterojunctions, and shows how these high conductivity n- and p-type channels are used for high performance nFETs and pFETs, along with wide bandgap RF, mm-wave, and CMOS applications. The thesis goes on to discuss how the several material advantages of aluminum nitride, such as its high thermal conductivity and piezoelectric coefficient, enable not just high performance of transistors, but also monolithic integration of passive elements such as high frequency filters, enabling a new form factor for integrated RF electronics.
Download or read book Advanced Materials in Microwaves and Optics written by David Wang and published by Trans Tech Publications Ltd. This book was released on 2012-01-24 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2011 International Conference on Advanced Materials in Microwaves and Optics (AMMO 2011), September 30-October 1, 2011, Bangkok, Thailand
Download or read book Journal of the Electrochemical Society written by and published by . This book was released on 2004 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Aspects of Bulk Crystal and Thin Film Preparation written by Nikolai Kolesnikov and published by BoD – Books on Demand. This book was released on 2012-01-13 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern research and development, materials manufacturing crystal growth is known as a way to solve a wide range of technological tasks in the fabrication of materials with preset properties. This book allows a reader to gain insight into selected aspects of the field, including growth of bulk inorganic crystals, preparation of thin films, low-dimensional structures, crystallization of proteins, and other organic compounds.
Download or read book Solid State Circuits Technologies written by Jacobus Swart and published by BoD – Books on Demand. This book was released on 2010-01-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book.
Download or read book Ultrananocrystalline Diamond Coatings for Next Generation High Tech and Medical Devices written by Orlando Auciello and published by Cambridge University Press. This book was released on 2022-07-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to ultrananocrystalline-diamond (UNCDTM) and thin film technology for implantable and external medical devices, edited by a pioneer in the field. Covering synthesis and properties, clinical applications, and regulation, it is essential reading for researchers and practitioners in materials science and biomedical engineering.
Download or read book Surface Acoustic Wave Devices in Telecommunications written by Ken-Ya Hashimoto and published by Springer Science & Business Media. This book was released on 2000-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.
Download or read book Thin Film Analysis by X Ray Scattering written by Mario Birkholz and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by Paul F. Fewster and Christoph Genzel While X-ray diffraction investigation of powders and polycrystalline matter was at the forefront of materials science in the 1960s and 70s, high-tech applications at the beginning of the 21st century are driven by the materials science of thin films. Very much an interdisciplinary field, chemists, biochemists, materials scientists, physicists and engineers all have a common interest in thin films and their manifold uses and applications. Grain size, porosity, density, preferred orientation and other properties are important to know: whether thin films fulfill their intended function depends crucially on their structure and morphology once a chemical composition has been chosen. Although their backgrounds differ greatly, all the involved specialists a profound understanding of how structural properties may be determined in order to perform their respective tasks in search of new and modern materials, coatings and functions. The author undertakes this in-depth introduction to the field of thin film X-ray characterization in a clear and precise manner.
Download or read book Intelligent Systems Design and Applications written by Ajith Abraham and published by Springer Nature. This book was released on with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evolution of Thin Film and Surface Structure and Morphology Volume 355 written by B. G. Demczyk and published by . This book was released on 1995-07-18 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
