Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book Tin and Its Alloys written by Ernest Sydney Hedges and published by . This book was released on 1960 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tin and Its Uses written by and published by . This book was released on 1952 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Archaeologist s Manual for Conservation written by Bradley A. Rodgers and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a Foreword by an archaeologist, not a conservator, but as Brad Rodgers says, “Conservation has been steadily pulled from archaeology by the forces of specialization”(p. 3),andhewantstoremedythatsituationthroughthismanual. He seesthisworkasa“calltoactionforthenon-professionalconservator,”permitting “curators, conservators, and archaeologists to identify artifacts that need prof- sional attention and, allow these professionals to stabilize most artifacts in their own laboratories with minimal intervention, using simple non-toxic procedures” (p. 5). It is the mission of Brad’s manual to “bring conservation back into arch- ology” (p. 6). The degree of success of that goal depends on the degree to which archaeologists pay attention to, and put to use, what Brad has to say, because as he says, “The conservationist/archaeologist is responsible to make preparation for an artifact’s care even before it is excavated and after its storage into the foreseeable future”. . . a tremendous responsibility” (p. 10). The manual is a combination of highly technical as well as common sense methods of conserving wood, iron and other metals, ceramics, glass and stone, organicsandcomposits—afarbetterguidetoartifactconservationthanwasava- able to me when I ?rst faced that archaeological challenge at colonial Brunswick Town, North Carolina in 1958—a challenge still being faced by archaeologists today. The stage of conservation in 1958 is in dramatic contrast to the procedures Brad describes in this manual—conservation has indeed made great progress. For instance,acommonprocedurethenwastoheattheartifactsredhotinafurnace—a method that made me cringe.
Download or read book Corrosion Control written by S. Bradford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human beings undoubtedly became aware of corrosion just after they made their first metals. These people probably began to control corrosion very so on after that by trying to keep metal away from corrosive environments. "Bring your tools in out of the rain" and "Clean the blood off your sword right after battle" would have been early maxims. Now that the mechanisms of corrosion are better understood, more techniques have been developed to control it. My corrosion experience extends over 10 years in industry and research and over 20 years teaching corrosion courses to university engineering students and industrial consulting. During that time I have developed an approach to corrosion that has successfully trained over 1500 engineers. This book treats corrosion and high-temperature oxidation separately. Corrosion is divided into three groups: (1) chemical dissolution including uniform attack, (2) electrochemical corrosion from either metallurgicalor environmental cells, and (3) corrosive-mechanical interactions. It seems more logical to group corrosion according to mechanisms than to arbitrarily separate them into 8 or 20 different types of corrosion as if they were unrelated. University students and industry personnel alike generally are afraid of chemistry and consequently approach corrosion theory very hesitantly. In this text the electrochemical reactions responsible for corrosion are summed up in only five simple half-cell reactions. When these are combined on a polarization diagram, which is explained in detail, the electrochemical pro cesses become obvious.
Download or read book Catalog of Books and Reports in the Bureau of Mines Technical Library Pittsburgh Pa written by United States. Bureau of Mines. Technical Library, Pittsburgh and published by . This book was released on 1968 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mitigating Tin Whisker Risks written by Takahiko Kato and published by John Wiley & Sons. This book was released on 2016-04-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the growth mechanisms of tin whiskers and the effective mitigation strategies necessary to reduce whisker growth risks This book covers key tin whisker topics, ranging from fundamental science to practical mitigation strategies. The text begins with a review of the characteristic properties of local microstructures around whisker and hillock grains to identify why these particular grains and locations become predisposed to forming whiskers and hillocks. The book discusses the basic properties of tin-based alloy finishes and the effects of various alloying elements on whisker formation, with a focus on potential mechanisms for whisker suppression or enhancement for each element. Tin whisker risk mitigation strategies for each tier of the supply chain for high reliability electronic systems are also described. Discusses whisker formation factors including surface grain geometry, crystallographic orientation-dependent surface grain boundary structure, and the localization of elastic strain/strain energy density distribution Examines how whiskers and hillocks evolve in time through real-time studies of whisker growth with the scanning electron microscope/focused ion beaming milling (SEM/FIB) Covers characterization methods of tin and tin-based alloy finishes such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD) Reviews theories of mechanically-induced tin whiskers with case studies using pure tin and other lead-free finishes shown to evaluate the pressure-induced tin whiskers Mitigating Tin Whisker Risks: Theory and Practice is intended for the broader electronic packaging and manufacturing community including: manufacturing engineers, packaging development engineers, as well as engineers and researchers in high reliability industries.
Download or read book Bibliographic Survey of Corrosion written by and published by . This book was released on 1958 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposition of Alloys written by Abner Brenner and published by Elsevier. This book was released on 2013-10-22 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrodeposition of Alloys: Principles and Practice, Volume II: Practical and Specific Information provides sufficient information for preparing and operating alloy plating baths. This book is organized into five sections encompassing 21 chapters that also consider the facts and theory of alloy plating. The five sections discuss the five types of alloy plating system with respect to the plating variables. Each section deals with the fundamental bases of alloy deposition, which have been summed up in six principles. This book further examines the role of diffusion in alloy deposition and the role of the density versus potential relations in alloy deposition, as well as certain misconceptions regarding their value in alloy deposition have been pointed out. This book will prove useful to electrochemists, researchers, and electrochemistry teachers and students.
Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 1: Metal/Environment Reactions is concerned with the subject of corrosion, with emphasis on the control of the environmental interactions of metals and alloys used as materials of construction. Corrosion is treated as a synthesis of corrosion science and corrosion engineering. This volume is comprised of nine chapters; the first of which provides an overview of the principles of corrosion and oxidation, with emphasis on the electrochemical mechanism of corrosion and how the kinetics of cathodic and anodic partial reactions control the rate of overall corrosion reaction. Attention then turns to the effects of environmental factors such as concentration, velocity, and temperature based on the assumption that either the anodic or cathodic reaction, but not both, is rate-controlling. The corrosion of ferrous and non-ferrous metals and alloys, as well as rarer and noble metals, is considered. The reader is also introduced to high-temperature corrosion and mechanical factors that affect corrosion. This book concludes with topics of electrochemistry and metallurgy relevant to corrosion, including the nature of the electrified interface between the metal and the solution; charge transfer across the interface under equilibrium and non-equilibrium conditions; overpotential and the rate of an electrode reaction; and the hydrogen evolution reaction and hydrogen absorption by ferrous alloys. This book will be of value to students as well as workers and engineers in the field of corrosion.
Download or read book Corrosion Prevention and Control written by and published by . This book was released on 1960 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tinplate Modern Canmaking Technology written by E. Morgan and published by Elsevier. This book was released on 2016-08-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a fully illustrated and practical guide to current industrial practice in the production, processing and use of tinplate with specific emphasis on its relevance to the packaging industry. Written primarily to provide the technician and apprentice with a sound working knowledge of the industry, it provides, for the first time in one concise volume, a readily comprehensible account of all the major aspects of the subject. Includes up-to-date details of modern equipment and plant, industrial processes, conversion techniques, recovery methods, and examines possible future developments.
Download or read book British Abstracts written by and published by . This book was released on 1952 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Prevention and Protection written by Edward Ghali and published by John Wiley & Sons. This book was released on 2007-01-30 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Prevention and Protection: Practical Solutions presents a functional approach to the various forms of corrosion, such as uniform corrosion, pitting corrosion, crevice corrosion, galvanic corrosion, stress corrosion, hydrogen-induced damage, sulphide stress cracking, erosion-corrosion, and corrosion fatigue in various industrial environments. The book is split into two parts. The first, consisting of five chapters: Introduction and Principles (Fundamentals) of Corrosion Corrosion Testing, Detection, Monitoring and Failure Analysis Regulations, Specifications and Safety Materials: Metals, Alloys, Steels and Plastics Corrosion Economics and Corrosion Management The second part of the book consists of two chapters which present: a discussion of corrosion reactions, media, active and active-passive corrosion behaviour and the various forms of corrosion, a collection of case histories and practical solutions which span a wide range of industrial problems in a variety of frequently encountered environments, including statues & monuments, corrosion problems in metallurgical and mineral processing plants, boilers, heat exchangers and cooling towers, aluminum and copper alloys, galvanized steel structures as well as hydrogeological environmental corrosion This text is relevant to researchers and practitioners, engineers and chemists, working in corrosion in industry, government laboratories and academia. It is also suitable as a course text for engineering students as well as libraries related to chemical and chemical engineering institutes and research departments.
Download or read book Basic Corrosion Technology for Scientists and Engineers written by Einar Mattsson and published by CRC Press. This book was released on 2023-04-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory guide covering Basic Corrosion Technology for Scientists and Engineers first published in 1999.
Download or read book Electroplating Metal Finishing written by and published by . This book was released on 1960 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for Jan. 1954-Aug. 1955 include a section: Metal finishing abstracts, later issued separately.
Download or read book Report on the Work of the Tin Research Institute written by Tin Research Institute and published by . This book was released on 1940 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
