Download or read book The Compressibility of Gases and Vapor liquid Phase Equilibria in Hydrocarbon Systems written by George Granger Brown and published by . This book was released on 1940 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Working Guide to Vapor Liquid Phase Equilibria Calculations written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2009-08-27 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Vapor-Liquid Phase Equilibria Calculations offers a practical guide for calculations of vapor-phase equilibria. The book begins by introducing basic concepts such as vapor pressure, vapor pressure charts, equilibrium ratios, and flash calculations. It then presents methods for predicting the equilibrium ratios of hydrocarbon mixtures: Wilson's correlation, Standing's correlation, convergence pressure method, and Whitson and Torp correlation. The book describes techniques to determine equilibrium ratios of the plus fraction, including Campbell's method, Winn's method, and Katz's method. The remaining chapters cover the solution of phase equilibrium problems in reservoir and process engineering; developments in the field of empirical cubic equations of state (EOS) and their applications in petroleum engineering; and the splitting of the plus fraction for EOS calculations. - Includes explanations of formulas - Step by step calculations - Provides examples and solutions
Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.
Download or read book Molecular Thermodynamics of Fluid Phase Equilibria written by John M. Prausnitz and published by Pearson Education. This book was released on 1998-10-22 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to mixtures, completely updated with new models, theories, examples, and data. Efficient separation operations and many other chemical processes depend upon a thorough understanding of the properties of gaseous and liquid mixtures. Molecular Thermodynamics of Fluid-Phase Equilibria, Third Edition is a systematic, practical guide to interpreting, correlating, and predicting thermodynamic properties used in mixture-related phase-equilibrium calculations. Completely updated, this edition reflects the growing maturity of techniques grounded in applied statistical thermodynamics and molecular simulation, while relying on classical thermodynamics, molecular physics, and physical chemistry wherever these fields offer superior solutions. Detailed new coverage includes: Techniques for improving separation processes and making them more environmentally friendly. Theoretical concepts enabling the description and interpretation of solution properties. New models, notably the lattice-fluid and statistical associated-fluid theories. Polymer solutions, including gas-polymer equilibria, polymer blends, membranes, and gels. Electrolyte solutions, including semi-empirical models for solutions containing salts or volatile electrolytes. Coverage also includes: fundamentals of classical thermodynamics of phase equilibria; thermodynamic properties from volumetric data; intermolecular forces; fugacities in gas and liquid mixtures; solubilities of gases and solids in liquids; high-pressure phase equilibria; virial coefficients for quantum gases; and much more. Throughout, Molecular Thermodynamics of Fluid-Phase Equilibria strikes a perfect balance between empirical techniques and theory, and is replete with useful examples and experimental data. More than ever, it is the essential resource for engineers, chemists, and other professionals working with mixtures and related processes.
Download or read book Phase Behavior written by Curtis H. Whitson and published by Society of Petroleum Engineers. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Behavior provides the reader with the tools needed to solve problems requiring a description of phase behavior and specific pressure/volume/temperature (PVT) properties.
Download or read book Monograph written by United States. Bureau of Mines and published by . This book was released on 1959 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Individual Hydrocarbons of Petroleum and Natural Gases written by Boris A. Grigoriev and published by Gulf Professional Publishing. This book was released on 2022-07-09 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermophysical Properties of Individual Hydrocarbons of Petroleum and Natural Gases: Properties, Methods, and Low-Carbon Technologies is a go-to data source for engineers who need derive property data on everyday components. Providing more precise data improves existing oil and gas processing systems and creates opportunities for more sustainable operations and equipment, such as hydrogen and carbon capture. Covering modern equations of state, this source discusses detailed descriptions of experimental apparatus, methods of measurement, corrections and error estimates as well as results of previous experiments. Generalized predictive methods for calculating viscosity and thermal conductivity are also covered. Rounding out with property databases and lower-carbon technology advances, the book gives today's engineers a detailed study of methods for more sustainable experimental research of thermophysical properties. - Teaches approaches for the measurement and modeling of thermophysical properties for future sustainability growth, including hydrogen and carbon capture - Provides exact property data of natural gas and their main components, including saturated properties - Gives readers new knowledge in experimental measurement procedures and guidelines for calculating thermophysical properties, along with updates on applications
Download or read book Petroleum Abstracts written by and published by . This book was released on 1993 with total page 1752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Equilibria in Chemical Engineering written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.
Download or read book Fluid Phase Behavior for Conventional and Unconventional Oil and Gas Reservoirs written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2016-11-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Phase Behavior for Conventional and Unconventional Oil and Gas Reservoirs delivers information on the role of PVT (pressure-volume-temperature) tests/data in various aspects, in particular reserve estimation, reservoir modeling, flow assurance, and enhanced oil recovery for both conventional and unconventional reservoirs. This must-have reference also prepares engineers on the importance of PVT tests, how to evaluate the data, develop an effective management plan for flow assurance, and gain perspective of flow characterization, with a particular focus on shale oil, shale gas, gas hydrates, and tight oil making. This book is a critical resource for today's reservoir engineer, helping them effectively manage and maximize a company's oil and gas reservoir assets. - Provides tactics on reservoir phase behavior and dynamics with new information on shale oil and gas hydrates - Helps readers Improve on the effect of salt concentration and application to C02-Acid Gas Disposal with content on water-hydrocarbon systems - Provides practical experience with PVT and tuning of EOS with additional online excel spreadsheet examples
Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir's fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. - Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas - Sharpen your reservoir models with added content on how to tune EOS parameters accurately - Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil
Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.
Download or read book Petroleum Reservoir Rock and Fluid Properties written by Abhijit Y. Dandekar and published by CRC Press. This book was released on 2013-02-21 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accessible to anyone with an engineering background, this text reveals the importance of understanding rock and fluid properties in petroleum engineering. Along with new practice problems and detailed solved examples, this edition covers Stone II three-phase relative permeability model, unconventional oil and gas resources, low salinity water injection, saturated reservoirs and production trends of five reservoir fluids, impact of mud filtrate invasion and heavy organics on samples, and flow assurance problems due to solid components of petroleum. It also offers better plots for determining oil and water Corey exponents from relative permeability data.
Download or read book Recent Insights in Petroleum Science and Engineering written by Mansoor Zoveidavianpoor and published by BoD – Books on Demand. This book was released on 2018-02-07 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new insights into the development of different aspects of petroleum science and engineering. The book contains 19 chapters divided into two main sections: (i) Exploration and Production and (ii) Environmental Solutions. There are 11 chapters in the first section, and the focus is on the topics related to exploration and production of oil and gas, such as characterization of petroleum source rocks, drilling technology, characterization of reservoir fluids, and enhanced oil recovery. In the second section, the special emphasis is on waste technologies and environmental cleanup in the downstream sector. The book written by numerous prominent scholars clearly shows the necessity of the multidisciplinary approach to sustainable development in the petroleum industry and stresses the most updated topics such as EOR and environmental cleanup of fossil fuel wastes.
Download or read book Information Circular written by and published by . This book was released on 1950 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inverse Heat Conduction and Heat Exchangers written by Suvanjan Bhattacharyya and published by BoD – Books on Demand. This book was released on 2020-12-02 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: A direct solution of the heat conduction equation with prescribed initial and boundary conditions yields temperature distribution inside a specimen. The direct solution is mathematically considered as a well-posed one because the solution exists, is unique, and continuously depends on input data. The estimation of unknown parameters from the measured temperature data is known as the inverse problem of heat conduction. An error in temperature measurement, thermal time lagging, thermocouple-cavity, or signal noise data makes stability a problem in the estimation of unknown parameters. The solution of the inverse problem can be obtained by employing the gradient or non-gradient based inverse algorithm. The aim of this book is to analyze the inverse problem and heat exchanger applications in the fields of aerospace, mechanical, applied mechanics, environment sciences, and engineering.
Download or read book Supercritical Fluid Technology 1991 written by Thomas J. Bruno and published by CRC Press. This book was released on 2017-11-22 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, we have collected a series of reviews that cover both experimental and theoretical work geared toward the more exact requirements of current SFE applications. While we have artificially divided the volume into experimental and theoretical sections, natural overlaps will be apparent. Many of the papers on experimental and theoretical sections, natural overlaps will be apparent. Many of the papers on experimental technique contain discussions on equation of state correlations. Indeed, a good deal of the experimental work is intimately tied to a mathematical description of fluid mixtures. The theoretical section presents reviews that cover the modern theory of critical phenomena, methods to correlate near critical experimental results and approaches to understanding the behavior of near critical fluids from microscopic theory. It is hoped that the scope of these reviews will provide the reader with the basis to further develop our understanding of the behavior of supercritical fluids.
