Download or read book The Complete Technology Book on Dairy Poultry Industries With Farming and Processing 2nd Revised Edition written by NIIR Board and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2012-06-03 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dietary habits of people have changed over the last few decades. Growing consciousness for protein rich food has given an impetus to both the dairy industry and poultry farming. Today, the dairy industry is a large organized sector with both private and government participation whereas poultry farming has indicated a rapid growth of 20% in the past few decades as well. Poultry is one of the fastest growing segments of the agricultural sector in India today. The production of agricultural crops has been rising at a rate of 1.5 to 2 % per annum that of eggs and broilers has been rising at a rate of 8 to 10 % per annum. From a backyard hobby it has culminated into an industry. The venture has largely been entrepreneurial and poultry farmers prefer to target their efforts to breeding & broiler farming for sale of ready broilers or layer farming for eggs. Poultry is the second most widely eaten meat in the world, accounting for about 30% of meat production worldwide. Dairy plants process the raw milk they receive from farmers so as to extend its marketable life. India has only a few specialized dairy farms. It is the production that characterizes the dairy industry. India is the worlds highest milk producer and all set to become the worlds largest food factory. Dairying is an important source of subsidiary income to small/marginal farmers and agricultural labourers. The manure from animals provides a good source of organic matter for improving soil fertility and crop yields. Since agriculture is mostly seasonal, there is a possibility of finding employment throughout the year for many persons through dairy farming. Thus, dairy also provides employment throughout the year. The main beneficiaries of dairy programmes are small/marginal farmers and landless labourers. Developments in the dairy and poultry industries during the last decade have been important enough to bring out a considerable amount of materials on dairy and poultry farming; processing of milk and poultry related products. The major contents of the book are dairy farming, poultry production, breeding, fertility, forage grass and concentrates, cow behaviour and health, manufacture of butter and cheese, process measurements and controls, components of poultry diets etc. This book also describes about the feed manufacturing process, butter and cheese manufacturing processes with diagrams, housing system and management of broilers and more. The first book of its kind which covers complete details of dairy and poultry farming, processing how to feed cows, birds in dairy and poultry, kind of diseases and their cure and other information related farming. This book will be an invaluable resource to dairy and poultry technology, institutions and for those who want to venture in this field.

Download or read book The Complete Technology Book of Dairy Poultry Industries written by Niir Board and published by National Institute of Industrial Re. This book was released on 2003-10-01 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the Dairy and Poultry industries during the last decade have been important enough to brought out a considerable amount of materials on Dairy and Poultry farming and processing of milk and poultry related products. This book will be very helpful to dairy technology, for those who wants to enter in this field, institutions and libraries

Download or read book The Complete Technology Book on Soaps 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2016-04-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soap is the traditional washing compound made from oil fats and caustic alkali. It is an item of daily necessity as cleaning agent. There are few specialty soaps like the washing soaps, castile soaps, sandal soap, specially flavored soaps, medicated soaps, toilet soaps and baby soaps. Population growth, especially households with children has a proportional impact on the growth of the manufacturing sector of the industry. The soap industry is vivacious, varied, creative and tricky, and has the prospective to provide a gratifying career. With increasing popularity there has been increase in potential competitors but it still has the opportunity of further exploitation. Today with increase in disposable incomes all around the world, demand for these products expected to increase because consumers are moving up towards premium products. With increasing awareness of hygienic standards, the market for the Soap is growing at a rate higher than 8% annually. People have become more creative in trying to find new ways in which they can make soap either for domestic use or commercial purposes. This book will provide all the basic facts and information you need to get started. You will be able to slowly build your way up to completely master the art of soap making. The book contains processes formulae, Photographs of Plant & Machinery with Supplier’s Contact Details, Addresses of Raw Material Suppliers and providing information regarding manufacturing method of different washing and toilet soaps. Some of the fundamentals of the book are raw material oil and fats, fatty acids, manufacture of soap products, technology of soap manufacturing, various formulations of soaps, soap perfumery, management of soap factories, analytical methods. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book The Complete Book on Glass and Ceramics Technology 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-04-09 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics also known as fire clay is an inorganic, non-metallic solid article, which is produced by the art or technique of heat and subsequent cooling. The ceramics industry in India came into existence about a century ago and has matured over time to form an industrial base. From traditional pottery making, the industry has evolved to find its place in the market for sophisticated insulators, electronic and electrical items. The ceramic industry has been modernizing continuously, by newer innovations in product design, quality etc. Glass is an inorganic product typically produced by melting a mixture of silica, soda and calcium compound with desired metallic oxides that serves as coloring agents. Indian glass industry will increase on the sidelines of real estate growth across retail, residential and office estate. Glass production involves the fusion of several inorganic substances. These various substances include products such as silica sand, soda ash, dolomite and limestone, representing together 99% of all the raw materials, excluding recycled glass. Glass-ceramics are mostly produced in two steps: First, a glass is formed by a glass-manufacturing process. The glass is cooled down and is then reheated in a second step. In this heat treatment the glass partly crystallizes. In most cases nucleation agents are added to the base composition of the glass-ceramic. These nucleation agents aid and control the crystallization process. Glass-ceramics are fine-grained polycrystalline materials formed when glasses of suitable compositions are heat treated and thus undergo controlled crystallization to the lower energy, crystalline state. It is important to emphasize a number of points in this statement on glass ceramics.Glass ceramics has helped the electronics industry build much smaller and highly efficient transistors, leading to advances in all types of devices. The book covers almost all important aspects of Glass and Ceramic Industry: Properties, Applications, Manufacturing, Processing and Photographs of Plant &Machinery with Supplier’s Contact Details. The major contents of the book are types of glasses, silicate glasses, boric oxide and borate glasses, phosphorus pentoxide and phosphate glasses, germanium dioxide and germanate glasses, titanate glasses, nitrate glasses, glasses based on water, halide glasses, modern glass working, monax and pyrex glass, electric welding, photo electric cells, glassy metals, analysis of glass, glass ceramics, ceramics as electrical materials, analysis of ceramics etc. The book will be useful to the consultants, technocrats, research scholars, libraries and existing units and new entrepreneurswho will find a good base to work further in this field.

Download or read book The Complete Technology Book on Processing Dehydration Canning Preservation of Fruits Vegetables Processed Food Industries 4th Revised Edition written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-10-18 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruits and vegetables are processed into a variety of products such as juices and concentrates, pulp, canned and dehydrated products, jams and jellies, pickles and chutneys etc. The extent of processing of fruits and vegetables varies from one country to another. The technology for preservation also varies with type of products and targeted market. Owing to the perishable nature of the fresh produce, international trade in vegetables is mostly confined to the processed forms. India is the second largest producer of fruits & vegetables in the world with an annual production of million tonnes. It accounts for about 15 per cent of the world’s production of vegetables. Due to the short shelf life of these crops, as much as 30-35% of fruits and vegetables perish during harvest, storage, grading, transport, packaging and distribution. Hence, there is a need for processing technology of fruits and vegetables to cater the domestic demand. The major contents of the book are procedures for fruit and vegetable preservation, chemical preservation of foods, food preservation by fermentation, preservation by drying, canning fruits, syrups and brines for canning, fruit beverages, fermented beverages, jams, jellies and marmalades, tomato products, chutneys, sauces and pickles, vegetables preparation for processing, vegetable juices, sauces and soups, vegetable dehydration, freezing of vegetables etc. The book also contains sample plant layout and photographs of machinery with supplier’s contact details. A total guide to manufacturing and entrepreneurial success in one of today's most food processing industry. This book is one-stop guide to one of the fastest growing sectors of the food processing industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of food processing products. It serves up a feast of how-to information, from concept to purchasing equipment.

Download or read book The Complete Technology Book on Textile Spinning Weaving Finishing and Printing 3rd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-09-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile industry is one of the few basic industries, which is characterised as a necessary component of human life. One may classify it as a more glamorous industry, but whatever it is, it provides with the basic requirement called clothes. Spinning is the process of converting cotton or manmade fibre into yarn to be used for weaving and knitting. Weaving is a method of textile production in which two distinct sets of yarns or threads are interlaced at right angles to form a fabric or cloth. Finishing refers to the processes that convert the woven or knitted cloth into a usable material. Printing is the process of applying colour to fabric in definite patterns or designs. The textile industry occupies an important position in the total volume of merchandise trade across countries. Developing countries account for little over two-third of world exports in textiles and clothing. It is the second largest employer after agriculture, providing employment to over 45 million people directly and 60 million people indirectly. The future for the textile industry looks promising, buoyed by both strong domestic consumption as well as export demand. This book is based on the latest technology involved in textile industry, which describes the processes available at the spinning and fabric forming stages coupled with the complexities of the finishing and colouration processes to the production of wide ranges of products. The major contents of the book are dyeing of textile materials, principles of spinning, process preparatory to spinning, principles of weaving, textile chemicals, yarn preparation, weaving and woven fabrics, knitting and knit fabrics, nonconventional fabrics, cellulosics, mixed fibers, printing compositions, printing processes, transfer dyes, transfer inks etc. It describes the manufacturing processes and photographs of plant & machinery with supplier’s contact details. It will be a standard reference book for professionals, entrepreneurs, textile mill owners, those studying and researching in this important area and others interested in the field of textile industry.

Download or read book The Complete Book on Waste Treatment Technologies Industrial Biomedical Water Electronic Municipal Household Kitchen Farm Animal Dairy Poultry Meat Fish Sea Food Industry Waste written by Prof. Dr. Mahendra Pal and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2015-01-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste management is a global problem that continues to increase with rapid industrialization, population growth, and economic development. As the world hurtles towards the urban future, the amount of Municipal Solid Waste (MSW) is growing very fast. Wastes are generally classified into solid, liquid, & gaseous and are broadly classified as household waste; municipal waste; commercial and non-hazardous industrial wastes; hazardous (toxic) industrial wastes; construction and demolition waste; health care wastes – waste generated in health care facilities (e.g. hospitals, medical research facilities); human and animal wastes; and incinerator wastes. The fast industrialization, urbanization, modern technology, and rapidly growing population in India have posed a serious challenge to the waste management. In India, per capita generation rate of municipal solid waste ranges from 0.2 to 0.5 kg/day. At present, the daily generation rate in South Asia, East Asia and the Pacific combined is approximately 1.0 million tons per day. Hazard management is essentially a problem solving process aimed at defining problems (identifying hazards), gathering information about them (assessing the risks) and solving them (controlling the risks). Integrated solid waste management is a comprehensive waste prevention, recycling, composting, and disposal programme. Disposing the waste in an environmentally friendly manner is highly crucial to all the nations of the world including India. The goal of urban solid waste management is to collect, treat and dispose of solid waste generated by the all the city dwellers in an environmentally, and socially satisfactory manner by using the most economical methods available. The major contents of the book are types of waste, human pathogens in animal agriculture production systems, pathogen reductions during waste treatment, aerosolization of pathogens etc. It will be a standard reference book for professionals, entrepreneurs, students, teachers, researchers, administrators, and planners of various disciplines who are directly or indirectly involved in the waste management. TAGS Best small and cottage scale industries, Better waste management, Biological Waste treatment techniques, Bio-medical Waste Management, Biomedical Waste treatment, Anaerobic lagoon techniques, Book about Waste Management, Book on Waste Management, Business guidance for Waste treatment, Chemical industry wastewater treatment, Dairy Waste treatment, Electronic Waste treatment, E-waste Management, E-Waste Management & Clean Technologies Treatment of E-waste for Safe Disposal, E-Waste Recycling Technologies, Farm Animal Waste treatment, Guidelines for Livestock Waste Management, Household Waste treatment, How to compost kitchen waste, How to make money from waste management, How to Start a Recycling Business - Opportunities & Ideas, How to start a successful Waste treatment business, How to start a waste disposal business, How to Start a Waste treatment Business, How to start waste management business in India, How to Start Waste treatment Industry in India, Industrial & Municipal Wastewater Treatment Processes, Industrial Waste Treatment book, Industrial Waste treatment, Industrial wastewater treatment, Is it a good idea to start up a waste management?, Kitchen waste management, Kitchen Waste treatment, Latest waste management technologies, Livestock Farm Waste treatment, Livestock waste disposal and management, Livestock waste treatment systems, Meat, Fish & Sea Food Industry Waste treatment, Modern waste management technologies, Most Profitable Waste treatment Business Ideas, Municipal Waste treatment, New small scale ideas in Waste treatment industry, Opening a Waste Management Business, Physical Waste treatment techniques, Poultry Waste treatment, Recycling and Treatment of E-waste, Setting up and opening your Waste treatment Business, Small Scale Waste treatment Projects, Solid waste treatment, Solid waste treatment methods, Solid waste treatment technologies, Starting a Waste Management Business, Starting a Waste treatment Business, Start-up Business Plan for Waste treatment, Start up Project for Waste treatment, Technology of Waste Management, Technology of Waste Treatment, Treatment and disposal of municipal waste, Treatment of Bio-Medical Waste, Treatment of kitchen waste, Waste disposal business plan, Waste Management & Processing Solutions, Waste Management and Recycling, Waste Management and Recycling Technology, Waste management business ideas, Waste management business opportunities, Waste management business plan, Waste Management Startups in India, Waste Recycling Business in India Business Plan, Waste Treatment and Disposal Methods, Waste treatment and waste disposal methods, Waste treatment Based Profitable Projects, Waste treatment Based Small Scale Industries Projects, Waste treatment Business, Waste treatment Industry in India, Waste treatment methods, Waste treatment process, Waste treatment Projects, Waste treatment technologies, Water Waste treatment, What is Waste Management and Methods of Waste Disposal?, What is waste treatment?

Download or read book Handbook on Drying Milling and Production of Cereal Foods written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-10-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cereals, or grains, are members of the grass family cultivated primarily for their starchy seeds (technically, dry fruits).Cereal grains are grown in greater quantities and provide more food energy worldwide than any other type of crop; they are therefore staple crops. Oats, barley, and some food products made from cereal grains. They are used for both human and animal food and as an industrial raw material. India produces cereals like wheat, rice, barley (jau), buckwheat, oats, corn (maize), rye, jowar (sorghum), pearl millet (bajra), millet (ragi), Sorghum, Triticale, etc. India is the world's second largest producer of Rice, Wheat and other cereals. The huge demand for cereals in the global market is creating an excellent environment for the export of Indian cereal products. India is not only the largest producer of cereal as well as largest exporter of cereal products in the world. India have been offering incredible opportunities as they have an abundant amount of raw materials and a wide availability of cheap labor. The book provides comprehensive coverage of the Drying, Milling and information regarding production method of Cereal Foods .It also covers Plant Layout, Process Flow Sheets and photographs of plant & Machinery with supplier’s contact details. Some of the fundamentals of the book are origin of wheat classification of wheat, endeavors to find industrial uses for wheat, criteria of wheat quality, botanical criteria of quality, milling principles, extraction rate and its effect on flour composition, grain structure as affecting grinding, definition of flour extraction stone milling: yields of products, roller milling: flour extraction rates, rice production and utilization, origin of rice, comparison of rice with other cereal grains, composition of rice and cereal, breeding rice varieties with specific, industrial uses for rice and rice by products, caryopsis and composition of rice, gross structure of the rice caryopsis and its milling fractions etc. This book is essential for those who are interested in cereal areas can find the complete information from manufacture to final uses of Cereal Foods. The present time is an era of information, one should know about what is happening in the world to be able to compete effectively. It will be very informative and useful to consultants, new entrepreneurs, startups, technocrats, research scholars, libraries and existing units.

Download or read book The Complete Book on Cultivation and Manufacture of Tea 2nd Revised Edition written by H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2016-03-08 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tea is one of the most popular beverages that are being consumed all over the world. Tea is known as a soothing drink and a way of life. Owing to its increasing demand, tea is considered to be one of the major components of world beverage market. Tea is very beneficial for health and is also known as anticarcinogenic properties. Green tea acts as an antiviral agent. Growing tea requires sufficient amount of work and there is additional level of work that must be incorporated to harvest it. Tea is cultivated in tropical and sub tropical regions. There are various kinds of tea such as black tea, green, oolong tea that can be obtained from real tea plant, Camellia sinensis. The making of different varieties of tea mainly depends upon plucking and rolling, spreading, storing process. The handbook describes aspects of tea cultivation, ranging from the history of old crop, machinery & equipment for various Tea, biological control, organic tea- and many more. This is a sincere attempt to open up the world of this wonderful beverage, its cultivation methods, types of tea available worldwide, manufacturing process, to the common man. Some of the fundamentals of the book are growth of tea in other countries, tea in Indian economy, biochemical constituents, pharmacological properties, selection, pollination and propagation, nutritional requirements, growth, photosynthesis and respiration, nursery management, water theory, oxidative degradation of protein, biological effect of polyphenols, analysis of tea, tea processing, green tea processing, tea bag production etc. This book will be a mile stone for its readers who are new to this sector, will also find useful for entrepreneurs, tea scientists and tea research establishments.

Download or read book Epoxy Resins Technology Handbook Manufacturing Process Synthesis Epoxy Resin Adhesives and Epoxy Coatings 2nd Revised Edition written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2019-04-19 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Epoxy is a term used to denote both the basic components and the cured end products of epoxy resins, as well as a colloquial name for the epoxide functional group. Epoxy resin are a class of thermoset materials used extensively in structural and specialty composite applications because they offer a unique combination of properties that are unattainable with other thermoset resins. Epoxies are monomers or prepolymers that further reacts with curing agents to yield high performance thermosetting plastics. They have gained wide acceptance in protecting coatings, electrical and structural applications because of their exceptional combination of properties such as toughness, adhesion, chemical resistance and superior electrical properties. Epoxy resins are characterized by the presence of a three membered cycle ether group commonly referred to as an epoxy group 1,2-epoxide, or oxirane. The most widely used epoxy resins are diglycidyl ethers of bisphenol-A derived from bisphenol-A and epichlorohydrin. The market of epoxy resins are growing day by day. Today the total business of this product is more than 100 crores. Epoxy resins are used for about 75% of wind blades currently produced worldwide, while polyester resins account for the remaining 25%. A standard 1.5-MW (megawatt) wind turbine has approximately 10 tonnes of epoxy in its blades. Traditionally, the markets for epoxy resins have been driven by demand generated primarily in areas of adhesives, building and civil construction, electrical insulation, printed circuit boards, and protective coatings for consumer durables, amongst others. The major contents of the book are synthesis and characteristics of epoxy resin, manufacture of epoxy resins, epoxide curing reactions, the dynamic mechanical properties of epoxy resins, physical and chemical properties of epoxy resins, epoxy resin adhesives, epoxy resin coatings, epoxy coating give into water, electrical and electronic applications, analysis of epoxides and epoxy resins and the toxicology of epoxy resins. It will be a standard reference book for professionals and entrepreneurs. Those who are interested in this field can find the complete information from manufacture to final uses of epoxy resin. This presentation will be very helpful to new entrepreneurs, technocrats, research scholars, libraries and existing units.

Download or read book Herbal Cosmetics Ayurvedic Medicines EOU 3rd Revised Edition written by P. K. Chattopadhyay and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2013-02-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Herbal cosmetics have been into usage from time immemorial so has been the use of Ayurvedic medicines. Ayurveda which means the complete knowledge for long life has been very popular these days on account of its minimum or zero side effects with considerable power of curing. Similarly herbal cosmetics have been of great value because of the least harm they cause to the skin and the radiance they add to the skin. These days a number of beauty products that are using the herbal formulae and Ayurveda concepts have got lot of attention and have been witnessing a huge rise in demand not only nationally but on international arena. The charm of understanding herbal product is even you can use it by making certain combination at your home and get the benefits. These are economical and sure to provide alleviate the problems not only for skin but for long term health issues also. Herbal products combine the skills of specialists in chemistry, physics, biology, medicine and herbs. These are less likely to cause any damaging effect to health. Bath and beauty products use herbs for both their scents and therapeutic qualities. Herbal products are replacing the synthetics products because of its harsh nature. Herbal products are in huge demand in the developed world for health care for the reason that they are efficient, safe and have lesser side effects. The formulations based on herbs are safe and effective. To exploit the knowledge that has got the genesis in our country the book aims to provide you a comprehensive information on different types of herbal Cosmetics formulas. The contents of the book are: Analysis of Creams, Infra-Red Spectrophotometer In Cosmetic Analysis, Infra Red Spectrophotometer In Cosmetic Analysis, Analysis of Creams, Analysis of Shampoos, Lal Tooth Powder, Bath and Massage Oil, Sun Care/Skin Lightening Compound, Herbal Liver Tonic, Vicks Like Compound, hair oil, Eye Drops, Packaging Criteria for Cosmetics and Toiletries, Vicks Like Compound, Cosmetics for Elderly People, Cough Syrup, Colour in Cosmetics, Herbal Liver Tonic, Herbal Formulation, Medicinal Herbs as Cosmetics, Medicinal & Massage Oils, Herbal Cosmetic Cream for Dry Skin, Herbal Deodorant Roll On, Drug Standardization, Guide Lines on GMP, Premises and Equipment Requirements, Aloe Gel, Tablets and Capsule, Sandalwood Oil and Machinery Section. The Third Revised Edition of Herbal cosmetics and Ayurvedic medicines (EOU) also includes photographs of machinery and equipments with addresses of their manufacturers. The book in general will be beneficial for entrepreneurs, industrialists, project consultants, libraries and in general all those looking for detail information.

Download or read book The Complete Book on Ginger Cultivation and Manufacture of Value Added Ginger Products Ginger Storage Ginger Oil Ginger Powder Ginger Paste Ginger Beer Instant Ginger Powder Drink and Dry Ginger from Green Ginger written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ginger is the common name for Zingiber officinale, which was originally cultivated in China and now equally spread around the world. Ginger is a herb but is often known as a spice, with a strong distinct flavor that can increase the production of saliva. The part that is used as spice on the plant itself is the rhizomes or ginger root. This ginger root is traditionally used with sweet foods in Western cuisine being included in popular recipes such as ginger ale, gingerbread, ginger biscuits and ginger cake. It is also used in many countries as a medicinal ingredient which many believe in. Historically, ginger has a long tradition of being very effective in alleviating symptoms of gastrointestinal distress. In herbal medicine, ginger is regarded as an excellent carminative and intestinal spasmolytic. Modern scientific research has revealed that ginger possesses numerous therapeutic properties including antioxidant effects, an ability to inhibit the formation of inflammatory compounds, and direct anti-inflammatory effects. India is the leading producer of ginger oil and dominates the ginger oil market with almost half shares out of total market. China is also known for ginger production and trade of ginger oil. Asia Pacific mainly exports ginger oil to North America and European markets. Increasing number of health conscious consumers, and their demands for natural oils and extracts based products is the major factor driving growth for essential oils and in turn ginger oil market. Ginger is majorly used in spices and thus ginger oils and oleoresins are preferred to prepared dried spices as flavoring in food industry, because they are more stable, contamination free, cleaner and can be easily standardized by blending. Thus the growth of food industry and spices demand are another factors driving growth of ginger oil market. The growth of natural personal care products industry is another growth driver for ginger oil market. The major content of the book are Ginger Cultivation, Farm and Forestry Production for Ginger, Diseases & Pest Management in Ginger, Medicinal Values of Ginger, Active Ingredients of Ginger, Pharmacological Activity of Ginger, Ginger Storage, Ginger Processing, Ginger Oleoresin, Ginger Oil, Ginger Beer, Ginger Powder, Ginger Paste, Instant Ginger Powder Drink, Ginger Candy, Dry Ginger from Green Ginger, Extraction of Ginger Oleoresin from Ginger-Root Using Co2,Production of Ginger Rhizome by Shoot-Tip Culture, Extraction of Essential Oils from Ginger Rhizome Using Steam Distillation Method, Packaging and Labelling BIS Specifications, Good Manufacturing Practices, Sample Plant Layouts, Photoraphs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Herbal Cosmetics Handbook 3rd Revised Edition written by H Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2015-04-09 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cosmetics have been in utilization for more than thousands years. More commonly known as make- up, it includes a host of skin products like foundation, lip colors etc. The international market for skincare and color cosmetics surpassed a sale of 53 billion dollars in 2002. The quantity and number of latest products brought to market both nationally and internationally continues to develop at a fast pace. Cosmetic chemists all the time are looking for attractive and striking material that enhances skin's appearance and healthiness. A huge collection of compounds is required to supply these products. The newest edition of the Cosmetics Toiletries and Fragrance Association (CTFA) Dictionary displays more than 10,000 raw materials and the list continues to increase with every year hundreds of new ingredients being added. The cosmetic chemistry has encompasses a vast area of study and one such is Herbal Cosmetics. Herbal cosmetics are the product of cosmetic chemistry, a science that combines the skills of specialists in chemistry, physics, biology, medicine and herbs. Since cosmetics are applied mostly to the skin, hair and nails, a brief description of the anatomy of these is desirable. Herbal cosmetic major users are girls and women who are very much peculiar about their skin type and requirement. Synthetic cosmetic being harsh and prone to more side- effects, herbal cosmetic is quickly replacing it and gaining a lot of popularity. As a result it has created an enormous market for itself both domestic as well as export market. Herbal Cosmetics Handbook has been featured as best seller. The book contains formulae, manufacturing processes of different herbal cosmetics like cosmetics for skin, nails, hair etc. It also covers analysis method of cosmetics, toxicity and test method. Some of the chapters of the book are: Classification of cosmetics Economic aspects, Cosmetic Emulsions, Cosmetics for the skin, Cosmetic Creams, Lubricating or Emollient Creams-Night Creams, Skin Protective and Hand Creams, Vanishing Creams-Foundation Creams, Liquid Creams, Cosmetic Lotions, Hand Lotions, Skin Toning Lotions-Skin Fresheners, Astringent Lotions, Hair Tonics and many more. The book will render useful purpose for new entrepreneurs, technologists, professionals, researchers and for those who want to extend their knowledge in the said field.

Download or read book The Complete Book on Onion Garlic Cultivation with Processing Production of Onion Paste Flakes Powder Garlic Paste Powder Flakes Oil written by NPCS Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2015-08-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Onion and garlic are the spice commodities used for flavouring the dishes. These are considered as valuable medicinal plants offer variety of medicinal properties. Onion & garlic are important commercial crops with versatile applications. The demand for the processed products is increasing day by day due to its convenience to handle and use. Onion & garlic can be processed into a wide variety of products. As per the estimate, approximately 6.75% of the onion produced is being processed. Besides fulfilling the constant demand of domestic population, India exports 13 to 18 lakh tons of onion annually worth around Rs. 2200 crores of foreign exchange revenue. Similarly in case of garlic, the production increased from 4.03 lakh tons to 12.26 lakh tons. Proper placement of onion & garlic products (like; onion pickle, onion chutney, onion paste, garlic oil, garlic paste, garlic powder, garlic flakes, onion flakes, onion powder) in the departmental stores, super markets, shopping malls backed-up by publicity is the key to success. It is also possible to have tie-up with exclusive restaurants, star hotels, renowned caterers for their regular requirements. This handbook is designed for use by everyone engaged in the onion & garlic products manufacturing. The book explains manufacturing process with flow diagrams of various onion & garlic products and addresses of plant & machinery suppliers with their photographs. Major contents of the book are varieties of onion, onion production, onion dehydration, types of garlic, garlic growing, garlic dehydration, onion pickle, onion chutney, onion paste, garlic oil, garlic paste, garlic powder, garlic flakes, onion flakes, onion powder, pest species and pest control of garlic and onion, integrated weed management, packaging, product advertising and sales promotion, marketing etc. It will be a standard reference book for professionals, entrepreneurs, food technologists, those studying and researching in this important area and others interested in the field of onion & garlic products manufacturing. TAGS Best small and cottage scale industries, Business consultancy, Business consultant, Business guidance for garlic production, Business guidance for onion production, Business guidance to clients, Business Plan for a Startup Business, Business start-up, Cultivation of garlic, Cultivation of Onion, Dehydrated Garlic & Garlic Powder, Dehydrated Garlic, Dehydrated Onion & Onion Powder, Dehydrated Onion, Garlic and Onion production, Garlic and Onion production Business, Garlic and Onion Small Business Manufacturing, Garlic dehydration, Garlic Oil manufacturing process, Garlic paste manufacturing process, Garlic powder manufacturing plant, Garlic powder manufacturing process, Garlic powder processing plant, Garlic processing plant, Garlic Production, Growing Garlic, Harvesting Garlic, How to Cultivate Onions, How to Grow Garlic, How to Grow Onions, How to make onion powder, How to start a successful Garlic and Onion production business, How to Start Garlic and Onion production business, How to Start Onion and Garlic Processing Industry in India, How to Start Onion and Garlic Production Business, Manufacturing Process of Garlic Flakes, Manufacturing Process of Garlic Paste, Manufacturing Process of Onion Chutney, Manufacturing Process of Onion Flakes, Manufacturing Process of Onion Paste, Manufacturing Process of Onion Powder, Modern small and cottage scale industries, Most Profitable Onion and Garlic Processing Business Ideas, New small scale ideas in Garlic and Onion processing industry, Onion & Garlic Cultivation with Processing, Onion and Garlic Based Profitable Projects, Onion and Garlic Based Small Scale Industries Projects, Onion and Garlic Processing Industry in India, Onion and Garlic Processing Projects, Onion cultivation, Onion cultivation in India, Onion dehydration plant in India, Onion dehydration process, Onion farming business plan, Onion Farming in India, Onion farming techniques, Onion Pickle Manufacturing Process, Onion powder making plant, Onion Powder, Onion Processing and Onion Products, Onion processing industry, Onion processing plant, Onion processing unit, Onion production, Onion Storage, Onions powder making, Pest species and pest control of garlic and onion, Preparation of Project Profiles, Process technology books, Processing of garlic, Profitable small and cottage scale industries, Profitable Small Scale Garlic and Onion Manufacturing, Project for startups, Project identification and selection, Setting up and opening your Garlic and Onion Business, Small scale Commercial Garlic and Onion by products making, Small scale Garlic and Onion production line, Small Scale Onion and Garlic Processing Projects, Small Start-up Business Project, Start up India, Stand up India, Starting an Onion and Garlic Processing Business, Startup, Start-up Business Plan for Garlic and Onion by products, Startup ideas, Startup Project, Startup Project for Onion and Garlic by products, Startup project plan, Technology Book of Garlic Cultivation and processing, Technology Book of Onion Cultivation and processing, Technology Package of Garlic Processing for Value Addition, Varieties of garlic, Varieties of onion

Download or read book Lubricating Oils Greases and Petroleum Products Manufacturing Handbook written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-01-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. The lubricants market is growing due to the growing automotive industry, increased consumer awareness and government regulations regarding lubricants. Lubricants are used in vehicles to reduce friction, which leads to a longer lifespan and reduced wear and tear on the vehicles. The growth of lubricants usage in the automotive industry is mainly due to an increasing demand for heavy duty vehicles and light passenger vehicles, and an increase in the average lifespan of the vehicles. As saving conventional resources and cutting emissions and energy have become central environmental matters, the lubricants are progressively attracting more consumer awareness. Greases are made by using oil (typically mineral oil) and mixing it with thickeners (such as lithium-based soaps). They may also contain additional lubricating particles, such as graphite, molybdenum disulfide, or polytetrafluoroethylene (PTFE, aka Teflon). White grease is made from inedible hog fat and has a low content of free fatty acids. Yellow grease is made from darker parts of the hog and may include parts used to make white grease. Brown grease contains beef and mutton fats as well as hog fats. Synthetic grease may consist of synthetic oils containing standard soaps or may be a mixture of synthetic thickeners, or bases, in petroleum oils. Silicones are greases in which both the base and the oil are synthetic. Asia-Pacific represents the largest and the fastest growing market, with volume sales projected to grow at a CAGR of 5% over the analysis period. Automotive lubricants represents the largest product market, with engine oils generating a major chunk of the revenues. The market for industrial lubricants is supported by the huge demand for industrial engine oils and growing consumption of process oils. The major content of the book are Food and Technical Grade White Oils and Highly Refined Paraffins, Base Oils from Petroleum, Formulation of Automotive Lubricants, Lubricating Grease, Aviation Lubricants, Formulation and Structure of Lubricating Greases, Marine Lubricants, Industrial Lubricants, Refining of Petroleum, Lubricating Oils, Greases and Solid Lubricants, Refinery Products, Crude Distillation and Photographs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Petroleum Petroleum Products Technology Handbook written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-05-04 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum asphalt is a sticky, black and highly viscous liquid or semi-solid that is present in most petroleum crude oils and in some natural deposits. Petroleum crude oil is a complex mixture of a great many different hydrocarbons. Refined petroleum products are derived from crude oils through processes such as catalytic cracking and fractional distillation. Refining is a necessary step before oil can be burned as fuel or used to create end products. Residual fuel oil is a complex mixture of hydrocarbons prepared by blending a residuum component with a flux stock which is a distillate component diluent, to give the desired viscosity of the fuel oil produced.Petroleum refining is the process of separating the many compoundspresent in crude petroleum.An Oil refinery or petroleum refinery is an industrial process plant wherecrude oil is processed and refined into more useful products The global Petroleum Asphalt market is valued at USD 48.8 Billion in 2017 and is expected to reach USD 77.67 Billion by the end of 2024, growing at a Growth Rate of 6.87% between 2017 and 2024.The global bunker fuel market was valued at $137,215.5 million in 2017 and is expected to reach $273,050.4 million by 2025, registering a CAGR of 9.4% from 2018 to 2025. Some of the fundamentals of the book are composition of radiation effects on lubricants, thermal cracking of pure saturatedhydrocarbons, petroleum asphalts, refinery products, refinery feedstocks, blending and compounding, oil refining, residual fuel oils, distillate heating oils, formulations of petroleum, photographs of machinery withsuppliers contact details. A total guide to manufacturing and entrepreneurial success in one of today's most lucrative petroleum industry. This book is one-stop guide to one of the fastest growing sectors of the petroleum industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of petroleum products. It serves up a feast of how-to information, from concept to purchasing equipment.

Download or read book The Complete Technology Book on Asbestos Cement Ceramics and Limestone written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2016-04-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asbestos is the generic term for a group of naturally occurring fibrous minerals with high tensile strength, flexibility, and resistance to thermal, chemical and electrical conditions. Asbestos fibers are of high-tensile strength, flexible, heat and chemical resistance, and good frictional properties. Cement is the most essential raw material in any kind of construction activity. Ceramics also known as fire clay is an inorganic, non-metallic solid article, which is produced by the art or technique of heat and subsequent cooling. Limestone is a sedimentary rock, mainly composed of calcium carbonate (CaCO3). It is the principal source of crushed stone for construction, transportation, agriculture, and industrial uses. Emerging applications in commercial sectors such as asbestos, cement and ceramic are poised to fuel demand in the coming years. Growing demand for limestone in the production of cement as well as in several other chemicals that are used in the production of high-value every-day products offers significant opportunities for growth. Global Limestone consumption is projected to reach 5.7 billion tons and expected to grow at an average annual rate of 4–5% in coming years. Presently, cement production is 330 million tonnes and expected to double to reach almost 550 million tonnes in future. The major contents of the book are asbestos, monitoring and identification of air-borne asbestos, asbestos in industrial applications, asbestos – cement products, non – occupational asbestos emissions and exposures, cements, mortars and concrete, raw materials, additives and fuels for cement, processes of manufacturing of cement, cement based on natural and artificial pozzolanas, fast-setting cements, special portland cements, packing of cement, storages of cement, ceramics, lime & limestone, glass & glass ceramics etc. It describes the manufacturing processes and photographs of plant & machinery with supplier’s contact details. It will be a standard reference book for professionals, entrepreneurs, those studying and researching in this important area and others interested in the field of these industries.