Download or read book Handbook of Infrared Spectroscopy of Ultrathin Films written by Valeri P. Tolstoy and published by John Wiley & Sons. This book was released on 2003-07-21 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the rapid increase in commercially available Fouriertransform infrared spectrometers and computers over the past tenyears, it has now become feasible to use IR spectrometry tocharacterize very thin films at extended interfaces. At the sametime, interest in thin films has grown tremendously because ofapplications in microelectronics, sensors, catalysis, andnanotechnology. The Handbook of Infrared Spectroscopy of UltrathinFilms provides a practical guide to experimental methods,up-to-date theory, and considerable reference data, critical forscientists who want to measure and interpret IR spectra ofultrathin films. This authoritative volume also: Offers informationneeded to effectively apply IR spectroscopy to the analysis andevaluation of thin and ultrathin films on flat and rough surfacesand on powders at solid-gaseous, solid-liquid, liquid-gaseous,liquid-liquid, and solid-solid interfaces. Provides full discussion of theory underlying techniques Describes experimental methods in detail, including optimumconditions for recording spectra and the interpretation ofspectra Gives detailed information on equipment, accessories, andtechniques Provides IR spectroscopic data tables as appendixes, includingthe first compilation of published data on longitudinal frequenciesof different substances Covers new approaches, such as Surface Enhanced IR spectroscopy(SEIR), time-resolved FTIR spectroscopy, high-resolutionmicrospectroscopy and using synchotron radiation

Download or read book Biointerface Characterization by Advanced IR Spectroscopy written by C.-M. Pradier and published by Elsevier. This book was released on 2011-07-26 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: IR spectroscopy has become without any doubt a key technique to answer questions raised when studying the interaction of proteins or peptides with solid surfaces for a fundamental point of view as well as for technological applications. Principle, experimental set ups, parameters and interpretation rules of several advanced IR-based techniques; application to biointerface characterisation through the presentation of recent examples, will be given in this book. It will describe how to characterise amino acids, protein or bacterial strain interactions with metal and oxide surfaces, by using infrared spectroscopy, in vacuum, in the air or in an aqueous medium. Results will highlight the performances and perspectives of the technique. - Description of the principles, expermental setups and parameter interpretation, and the theory for several advanced IR-based techniques for interface characterisation - Contains examples which demonstrate the capacity, potential and limits of the IR techniques - Helps finding the most adequate mode of analysis - Contains examples - Contains a glossary by techniques and by keywords

Download or read book Infrared Characterization For Microelectronics written by Wai Shing Lau and published by World Scientific. This book was released on 1999-10-01 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the books on infrared characterization are for applications in chemistry and no book has been dedicated to infrared characterization for microelectronics. The focus of the book will be on practical applications useful to the production line and to the research and development of microelectronics. The background knowledge and significance of doing a particular type of infrared measurement will be discussed in detail. The principal purpose of the book is to serve as a useful handbook for practising engineers and scientists in the field of microelectronics.

Download or read book Handbook of Infrared Spectroscopy of Ultrathin Films written by Valeri P. Tolstoy and published by John Wiley & Sons. This book was released on 2003-06-10 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the rapid increase in commercially available Fourier transform infrared spectrometers and computers over the past ten years, it has now become feasible to use IR spectrometry to characterize very thin films at extended interfaces. At the same time, interest in thin films has grown tremendously because of applications in microelectronics, sensors, catalysis, and nanotechnology. The Handbook of Infrared Spectroscopy of Ultrathin Films provides a practical guide to experimental methods, up-to-date theory, and considerable reference data, critical for scientists who want to measure and interpret IR spectra of ultrathin films. This authoritative volume also: Offers information needed to effectively apply IR spectroscopy to the analysis and evaluation of thin and ultrathin films on flat and rough surfaces and on powders at solid-gaseous, solid-liquid, liquid-gaseous, liquid-liquid, and solid-solid interfaces. * Provides full discussion of theory underlying techniques * Describes experimental methods in detail, including optimum conditions for recording spectra and the interpretation of spectra * Gives detailed information on equipment, accessories, and techniques * Provides IR spectroscopic data tables as appendixes, including the first compilation of published data on longitudinal frequencies of different substances * Covers new approaches, such as Surface Enhanced IR spectroscopy (SEIR), time-resolved FTIR spectroscopy, high-resolution microspectroscopy and using synchotron radiation

Download or read book Biointerface Characterization by Advanced IR Spectroscopy written by C.-M. Pradier and published by Elsevier. This book was released on 2011-09-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: "There is an increasing interest in research and applications of biosensors and bio-compatability in relation to environmental protection, food and medical safety, implants, early detection of diseases and pollutant detection. This book describes how to characterise amino acids, protein or bacterial strain adsorption on metal and oxide surfaces by using infrared spectroscopy, in a vacuum, in the air or in an aqueous medium. Features description of the principles, experimental setups and parameter interpretation, and the theory for several advanced IR-based techniques for interface characterisation Contains examples which demonstrate the capacity, potential and limits of the IR techniques Helps finding the most adequate mode of analysis."--Publisher.

Download or read book Spectroscopy for Materials Characterization written by Simonpietro Agnello and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPECTROSCOPY FOR MATERIALS CHARACTERIZATION Learn foundational and advanced spectroscopy techniques from leading researchers in physics, chemistry, surface science, and nanoscience In Spectroscopy for Materials Characterization, accomplished researcher Simonpietro Agnello delivers a practical and accessible compilation of various spectroscopy techniques taught and used to today. The book offers a wide-ranging approach taught by leading researchers working in physics, chemistry, surface science, and nanoscience. It is ideal for both new students and advanced researchers studying and working with spectroscopy. Topics such as confocal and two photon spectroscopy, as well as infrared absorption and Raman and micro-Raman spectroscopy, are discussed, as are thermally stimulated luminescence and spectroscopic studies of radiation effects on optical materials. Each chapter includes a basic introduction to the theory necessary to understand a specific technique, details about the characteristic instrumental features and apparatuses used, including tips for the appropriate arrangement of a typical experiment, and a reproducible case study that shows the discussed techniques used in a real laboratory. Readers will benefit from the inclusion of: Complete and practical case studies at the conclusion of each chapter to highlight the concepts and techniques discussed in the material Citations of additional resources ideal for further study A thorough introduction to the basic aspects of radiation matter interaction in the visible-ultraviolet range and the fundamentals of absorption and emission A rigorous exploration of time resolved spectroscopy at the nanosecond and femtosecond intervals Perfect for Master and Ph.D. students and researchers in physics, chemistry, engineering, and biology, Spectroscopy for Materials Characterization will also earn a place in the libraries of materials science researchers and students seeking a one-stop reference to basic and advanced spectroscopy techniques.

Download or read book Modern Glass Characterization written by Mario Affatigato and published by John Wiley & Sons. This book was released on 2015-10-05 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists of a series of edited chapters, each written by an expert in the field and focusing on a particular characterization technique as applied to glass. The book covers a variety of techniques ranging from the very common (like Raman and FTIR) to the most recent (and less well known) ones, like SEM for structural analysis and photoelastic measurements. The level of the chapters make it suitable for researchers and for graduate students about to start their research work. It will also: discuss the technique itself, background, nuances when it comes to looking at glassy materials, interpretation of results, case studies, and recent and near-future innovations Fill a widening gap in modern techniques for glass characterization Provide much needed updates on the multiple essential characterization techniques

Download or read book Modern Glass Characterization written by Mario Affatigato and published by John Wiley & Sons. This book was released on 2015-09-10 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists of a series of edited chapters, each written by an expert in the field and focusing on a particular characterization technique as applied to glass. The book covers a variety of techniques ranging from the very common (like Raman and FTIR) to the most recent (and less well known) ones, like SEM for structural analysis and photoelastic measurements. The level of the chapters make it suitable for researchers and for graduate students about to start their research work. It will also: discuss the technique itself, background, nuances when it comes to looking at glassy materials, interpretation of results, case studies, and recent and near-future innovations Fill a widening gap in modern techniques for glass characterization Provide much needed updates on the multiple essential characterization techniques

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Thin Films Five Volume Set written by Hari Singh Nalwa and published by Academic Press. This book was released on 2001-10-29 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume handbook focuses on processing techniques, characterization methods, and physical properties of thin films (thin layers of insulating, conducting, or semiconductor material). The editor has composed five separate, thematic volumes on thin films of metals, semimetals, glasses, ceramics, alloys, organics, diamonds, graphites, porous materials, noncrystalline solids, supramolecules, polymers, copolymers, biopolymers, composites, blends, activated carbons, intermetallics, chalcogenides, dyes, pigments, nanostructured materials, biomaterials, inorganic/polymer composites, organoceramics, metallocenes, disordered systems, liquid crystals, quasicrystals, and layered structures. Thin films is a field of the utmost importance in today's materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices. Advanced, high-performance computers, high-definition TV, digital camcorders, sensitive broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are but a few examples of miniaturized device technologies that depend the utilization of thin film materials. The Handbook of Thin Films Materials is a comprehensive reference focusing on processing techniques, characterization methods, and physical properties of these thin film materials.

Download or read book Third Aerospace Environmental Technology Conference written by and published by . This book was released on 1999 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optical Characterization of Thin Solid Films written by Olaf Stenzel and published by Springer. This book was released on 2018-03-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an up-to-date survey of the major optical characterization techniques for thin solid films. Emphasis is placed on practicability of the various approaches. Relevant fundamentals are briefly reviewed before demonstrating the application of these techniques to practically relevant research and development topics. The book is written by international top experts, all of whom are involved in industrial research and development projects.

Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-07-13 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.

Download or read book Spectroscopy for Materials Characterization written by Simonpietro Agnello and published by John Wiley & Sons. This book was released on 2021-08-23 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPECTROSCOPY FOR MATERIALS CHARACTERIZATION Learn foundational and advanced spectroscopy techniques from leading researchers in physics, chemistry, surface science, and nanoscience In Spectroscopy for Materials Characterization, accomplished researcher Simonpietro Agnello delivers a practical and accessible compilation of various spectroscopy techniques taught and used to today. The book offers a wide-ranging approach taught by leading researchers working in physics, chemistry, surface science, and nanoscience. It is ideal for both new students and advanced researchers studying and working with spectroscopy. Topics such as confocal and two photon spectroscopy, as well as infrared absorption and Raman and micro-Raman spectroscopy, are discussed, as are thermally stimulated luminescence and spectroscopic studies of radiation effects on optical materials. Each chapter includes a basic introduction to the theory necessary to understand a specific technique, details about the characteristic instrumental features and apparatuses used, including tips for the appropriate arrangement of a typical experiment, and a reproducible case study that shows the discussed techniques used in a real laboratory. Readers will benefit from the inclusion of: Complete and practical case studies at the conclusion of each chapter to highlight the concepts and techniques discussed in the material Citations of additional resources ideal for further study A thorough introduction to the basic aspects of radiation matter interaction in the visible-ultraviolet range and the fundamentals of absorption and emission A rigorous exploration of time resolved spectroscopy at the nanosecond and femtosecond intervals Perfect for Master and Ph.D. students and researchers in physics, chemistry, engineering, and biology, Spectroscopy for Materials Characterization will also earn a place in the libraries of materials science researchers and students seeking a one-stop reference to basic and advanced spectroscopy techniques.

Download or read book Surface Enhanced Vibrational Spectroscopy written by Ricardo Aroca and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Enhanced Vibrational Spectroscopy (SEVS) has reached maturity as an analytical technique, but until now there has been no single work that describes the theory and experiments of SEVS. This book combines the two important techniques of surface-enhanced Raman scattering (SERS) and surface-enhanced infrared (SEIR) into one text that serves as the definitive resource on SEVS. Discusses both the theory and the applications of SEVS and provides an up-to-date study of the state of the art Offers interpretations of SEVS spectra for practicing analysts Discusses interpretation of SEVS spectra, which can often be very different to the non-enhanced spectrum - aids the practicing analyst

Download or read book Characterization and Analysis of Polymers written by Wiley and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, this book provides coverage of key methods of characterization of the physical and chemical properties of polymers, including atomic force microscopy, chromatographic methods, laser light scattering, nuclear magnetic resonance, and thermal analysis, among others. Written by prominent scholars from around the world, this reference presents over twenty-five self -contained articles on the most used analytical techniques currently practiced in polymer science.

Download or read book Progress in Fourier Transform Spectroscopy written by Janos Mink and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: 19 plenary lectures and 203 poster papers presented at the 10th International Conference of Fourier Transform Spectroscopy in Budapest 1995 give an overview on the state-of-the art of this technology and its wide range of applications. The reader will get information on any aspects of FTS including the latest instrumental developments, e.g. in diode array detection, time resolution FTS, microscopy and spectral mapping, double modulation and two-dimensional FTS.