Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a
Download or read book Catalytic oxidation of carbon monoxide over oxides of indium an written by Adrianus Jacobus Van Dillen and published by . This book was released on 19?? with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Dioxide Utilization for Global Sustainability written by Sang-Eon Park and published by Elsevier. This book was released on 2004-10-27 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing global environmental problems, such as global warming is essential to global sustainability. Continued research leads to advancement in standard methods and produces new data. Carbon Dioxide Utilization for Global Sustainability: Proceedings of the 7th ICCDU (International Conference on Carbon Dioxide Utilization) reflects the most recent research results, as well as stimulating scientific discussions with new challenges in advancing the development of carbon dioxide utilization. Drawing on a wealth of information, this well structured book will benefit students, researchers and consultants looking to catch up on current developments in environmental and chemical engineering.* Provides comprehensive data on CO2 utilisation* Contains up-to-date information, including recent research trends* Is written for students, researchers and consultants in environmental and chemical engineering
Download or read book Catalysis by Materials with Well Defined Structures written by Zili Wu and published by Academic Press. This book was released on 2015-03-26 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis by Materials with Well-Defined Structures examines the latest developments in the use of model systems in fundamental catalytic science. A team of prominent experts provides authoritative, first-hand information, helping readers better understand heterogeneous catalysis by utilizing model catalysts based on uniformly nanostructured materials. The text addresses topics and issues related to material synthesis, characterization, catalytic reactions, surface chemistry, mechanism, and theoretical modeling, and features a comprehensive review of recent advances in catalytic studies on nanomaterials with well-defined structures, including nanoshaped metals and metal oxides, nanoclusters, and single sites in the areas of heterogeneous thermal catalysis, photocatalysis, and electrocatalysis. Users will find this book to be an invaluable, authoritative source of information for both the surface scientist and the catalysis practitioner - Outlines the importance of nanomaterials and their potential as catalysts - Provides detailed information on synthesis and characterization of nanomaterials with well-defined structures, relating surface activity to catalytic activity - Details how to establish the structure-catalysis relationship and how to reveal the surface chemistry and surface structure of catalysts - Offers examples on various in situ characterization instrumental techniques - Includes in-depth theoretical modeling utilizing advanced Density Functional Theory (DFT) methods
Download or read book Surface Science written by Kurt W. Kolasinski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface chemistry is an essential and developing area of physical chemistry and one that has become increasingly interdisciplinary. The Second Edition of Surface Science: Foundations of Catalysis and Nanoscience has been fully revised and updated to reflect all the latest developments in the field and now includes an extensive discussion about nanoparticle growth and the quantum confinement effects in nanoscale systems. Two new chapters have been added and discuss The Liquid/Solid Interface and Non-Thermal Reactions, and Photon and Electron Stimulated Chemistry and Atom Manipulation. There are now many more worked examples included throughout to help students develop their problem-solving skills.
Download or read book Surface Science written by Russel F. Howe and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface science has existed as a recognized discipline for more than 20 years. During this period, the subject has expanded in two important ways. On the one hand, the techniques available for studying surfaces, both experimental and theoretical, have grown in number and in sophistication. On the other hand, surface science has been applied to an increasing number of areas of technology, such as catalysis, semicon ductor processing, new materials development, corrosion prevention, adhesion and tribology. . There is, however, no sharp division between fundamental and applied surface science. New techniques can immediately be applied to technologically important problems. Improvements in understanding of fundamental phenomena such as epi taxial growth of one metal on another, or the bonding of hydrocarbons to metal sur faces, to name just two examples, have direct consequences for technology. Surface science has also become very much an interdisciplinary subject; physics, chemistry, materials science, chemical and electronical engineering all draw upon and contribute to surface science. The intimate relationship between principles and applications of surface science forms the theme of this proceedings volume. The contributions were all presented as invited lectures at an Australian-German Workshop on Surface Science held at Coogee Beach, Sydney, Australia, in December 1991. The contributors, all active surface scientists in their respective countries, were asked to highlight recent develop ments in their own areas of activity involving new techniques, advances in funda mental understanding or new applications in technology.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Kinetics of Catalytic Reactions written by M. Albert Vannice and published by Springer Science & Business Media. This book was released on 2006-04-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to conduct kinetic experiments with heterogeneous catalysts, analyze and model the results, and characterize the catalysts Detailed analysis of mass transfer in liquid phase reactions involving porous catalysts. Important to the fine chemicals and pharmaceutical industries so it has appeal to many researchers in both industry and academia (chemical engineering and chemistry departments
Download or read book Heterogeneous Catalytic Redox Reactions written by Vladislav Sadykov and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-10-21 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book brings together cutting-edge research in the area of heterogeneous catalytic redox processes. The first part of the book covers the catalytic properties of transition metal oxides and the techniques for catalysts preparation, such as mechanochemistry, plasmochemistry, hydrothermal treatment, etc. Further the authors focus on mechanisms of heterogeneous redox reactions followed by the overview of industrial applications.
Download or read book Current Trends of Surface Science and Catalysis written by Jeong Young Park and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book covers the latest surface science studies on model catalysts, including single crystals, non-colloidal nanocatalysts, and nanoparticles in various forms with the control of size, shape and composition. This book addresses the issue of bridging “materials and pressure gaps” and also discusses the important issue of metal-oxide interface and hot electron flows in heterogeneous catalysis. The current development of in-situ surface techniques that is relevant to bridging “pressure gaps” is also highlighted.
Download or read book Catalysis written by John R. Anderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic oxidation processes are bf central importance to a substantial part of large-scale chemical industry. Indeed, this area of industrial catalysis has an extremely long history which stretches back well into the last century. The development and growth of catalytic oxi dation processes for the manufacture of commodities such as sulfuric acid and nitric acid can be viewed as indicators for the growth of the early and middle years of the entire inorganic chemical industry, and in an analogous fashion the manufacture of products such as phthalic anhydride, maleic anhydride and ethylene oxide has been central to the development of an organic chemical industry. We should all be able" to learn from history, and present-day scientists and technologists will find considerable benefit in following the account of the historical development of catalytic oxidation processes presented in Chapter I by Drs. G. Chinchen, P. Davies and R. J. Sampson. Alkenes are important intermediates in many processes in organic chemical industry. Being mostly petroleum derived, the alkene availability pattern does not necessar ily match consumption requirements and an alkene inter conversion process such as metathesis is clearly of in dustrial importance. In fact alkene metathesis, in addi tion to its industrial significance, poses an interesting mechanistic problem. upon which considerable effort has been expended in recent years and which is now fairly well understood.
Download or read book Complete Plays and Prose written by Georg Büchner and published by Macmillan. This book was released on 1963 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leonce and Lena: There are two imaginary countries: the Kingdom of Popo and the Kingdom of Pipi. Prince Leonce of the Kingdom of Popo and Princess Lena of the Kingdom of Pipi have had their political marriage arranged.
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
Download or read book Catalysis written by James Spivey and published by Royal Society of Chemistry. This book was released on 2020-02-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are required for a variety of applications and researchers are increasingly challenged to find cost effective and environmentally benign catalysts to use. This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight reactions active under oxidative coupling of methane conditions and how they are interlinked, heterogeneous nickel catalysts and their use in laboratory and industry, the reaction mechanism of heterogeneous catalysis with the surface science probe, the concepts of electroless deposition (ED) methods for preparation of true bimetallic catalysts, the general subject of metal-support interactions occurring over ruthenium-based catalysts and benzene as the target volatile organic compound (VOC). Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.
Download or read book Oxygen in Catalysis written by Adam Bielanski and published by CRC Press. This book was released on 1990-11-29 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of catalytic systems commonly used as model systems in the laboratory and as industrial catalysts in large-scale operations, and a discussion of the mechanisms operating in these reactions. Attempts to describe the elementary steps by quantum chemical methods are also shown, as are rec
Download or read book Catalysis and Automotive Pollution Control written by A. Crucq and published by Elsevier. This book was released on 1987-04-01 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: In June 1984 the EEC Commission proposed new standards of permissible exhaust gas from motor vehicles to be introduced in Europe; these standards were approved by the Ministers of the Environment one year later. As the control of automotive pollution is at present mainly a catalytic problem, it was decided to hold an International Symposium on the subject, and an organizing committee composed of people engaged in catalytic research in the different Belgian Universities was constituted. This was the first Symposium of its kind to be held on an international level, and the quality and scientific interest of the papers presented was exceptional. It is planned to hold a follow-up Symposium in 2 to 3 years' time.The first part of the book is a general introduction to the problem of automotive pollution. The second, properly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.
Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.
