Download or read book Advances in Deformation Processing written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has con ducted the Sagamore Army Materials Research Conference in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University since 1954. The purpose of the conference has been to gather to gether scientists and engineers from academic institutions, in dustry and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific community. This volume, Advances in Deformation Processing, addresses the areas of Analytical Advances, Workability, Processing to Optimize Properties, Advanced Applications - Materials, and Advanced Applications - Processes. The dedicated assistance of Mr. Joseph Bernier of the Army Materials and Mechanics Research Center throughout the stages of the conference planning and finally the publication of the Sagamore Conference Proceedings is deeply appreciated. The support of Helen Brown DeMascio of Syracuse University in p- paring the final manuscript is acknowledged. The continued active interest and support of these conferences by Dr. A. E. Gorum, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii Contents SESSION I INTRODUCTION A. E. Gorum, Moderator Continuum Mechanics and Deformation Processing 1.

Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 2101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume (Parts A and B) contains the edited papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at Bowdoin College, Brunswick, ME on July 24-28, 1989. The Review was organized by the Center for Advanced NDE at the Ames Laboratory of the U. S. Department of Energy, in cooperation with the Office of Basic Energy Sciences, USDOE, and the Materials Laboratory at Wright-Patterson Air Force Base. The statistics for the 1989 Review of Progress in QNDE include a total of over 460 participants from the U. S. and nine foreign countries who presented some 325 papers. Over the years this conference has grown into one of the largest, most significant gatherings of NDE researchers and engineers in the world. The meeting was divided into 35 sessions, with as many as four sessions running concurrently, and covering all stages of NDE development from basic research investigations to early engineering applications and all methods of inspection science from ultrasonics to x-ray tomography. The Editors have organized the papers in the Proceedings according to topical subject headings, rather than in the original order of presentation. This rearrangement yields a more user-friendly reference work and follows a pattern now familiar to regular attendees of the Review. Some changes in the headings and their subcategories have been introduced to accommodate dynamic evolution of the field, as we observe it.

Download or read book Proceedings of the 6th International Conference on Recrystallization and Grain Growth ReX GG 2016 written by Elizabeth Holm and published by Springer. This book was released on 2016-11-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a cross-section of the papers presented at the 6th International Conference on Recrystallization and Grain Growth. The volume is divided into nine sections: • Grain growth theory and simulation • Recrystallization theory and simulation • Low carbon and IF steels • High strength steels • Electrical steels • Stainless steels • Aluminum and magnesium alloys • Nickel and nickel based superalloys • Unconventional and advanced materials

Download or read book Principles of Inorganic Materials Design written by John N. Lalena and published by John Wiley & Sons. This book was released on 2020-04-10 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the fundamentals of materials design with this all-inclusive approach to the basics in the field Study of materials science is an important aspect of curricula at universities worldwide. This text is designed to serve students at a fundamental level, positioning materials design as an essential aspect of the study of electronics, medicine, and energy storage. Now in its 3rd edition, Principles of Inorganic Materials Design is an introduction to relevant topics including inorganic materials structure/property relations and material behaviors. The new edition now includes chapters on computational materials science, intermetallic compounds, and covalent compounds. The text is meant to aid students in their studies by providing additional tools to study the key concepts and understand recent developments in materials research. In addition to the many topics covered, the textbook includes: • Accessible learning tools to help students better understand key concepts • Updated content including case studies and new information on computational materials science • Practical end-of-chapter exercises to assist students with the learning of the material • Short biographies introducing pioneers in the field of inorganic materials science For undergraduates just learning the material or professionals looking to brush up on their knowledge of current materials design information, this text covers a wide range of concepts, research, and topics to help round out their education. The foreword to the first edition was written by the 2019 Chemistry Nobel laureate Prof. John B. Goodenough.

Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide

Download or read book Advanced Materials Processes written by and published by . This book was released on 1988-07 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals and Applications of Magnetic Materials written by Kannan M. Krishnan and published by Oxford University Press. This book was released on 2016 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students and researchers looking for a comprehensive textbook on magnetism, magnetic materials and related applications will find in this book an excellent explanation of the field. Chapters progress logically from the physics of magnetism, to magnetic phenomena in materials, to size and dimensionality effects, to applications. Beginning with a description of magnetic phenomena and measurements on a macroscopic scale, the book then presents discussions of intrinsic and phenomenological concepts of magnetism such as electronic magnetic moments and classical, quantum, and band theories of magnetic behavior. It then covers ordered magnetic materials (emphasizing their structure-sensitive properties) and magnetic phenomena, including magnetic anisotropy, magnetostriction, and magnetic domain structures and dynamics. What follows is a comprehensive description of imaging methods to resolve magnetic microstructures (domains) along with an introduction to micromagnetic modeling. The book then explores in detail size (small particles) and dimensionality (surface and interfaces) effects -- the underpinnings of nanoscience and nanotechnology that are brought into sharp focus by magnetism. The hallmark of modern science is its interdisciplinarity, and the second half of the book offers interdisciplinary discussions of information technology, magnetoelectronics and the future of biomedicine via recent developments in magnetism. Modern materials with tailored properties require careful synthetic and characterization strategies. The book also includes relevant details of the chemical synthesis of small particles and the physical deposition of ultra thin films. In addition, the book presents details of state-of-the-art characterization methods and summaries of representative families of materials, including tables of properties. CGS equivalents (to SI) are included.

Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials II written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2007-07-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer-reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.

Download or read book Spin Resonance Spectroscopy written by Chandran Karunakaran and published by Elsevier. This book was released on 2018-01-02 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spin Resonance Spectroscopy: Principles and Applications presents the principles, recent advancements and applications of nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR) in a single multi-disciplinary reference. Spin resonance spectroscopic techniques through NMR and EPR are widely used by chemists, physicists, biologists and medicinal chemists. This book addresses the need for new spin resonance spectroscopy content while also presenting the principles, recent advancements and applications of NMR and EPR simultaneously. Ideal for researchers and students alike, the book provides a single source of NMR and EPR applications using a dynamic, holistic and multi-disciplinary approach. - Presents a highly interdisciplinary approach by including NMR and EPR applications in chemistry, physics, biology and biotechnology - Addresses both NMR and EPR, making its concepts and applications implementable in multiple resonance environments and core scientific disciplines - Features a broad range of methods, examples and illustrations for both NMR and EPR to aid in retention and underscore key concepts

Download or read book Handbook of Magnetic Materials written by Ekkes H. Brück and published by Elsevier. This book was released on 2020-11-29 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Magnetic Materials, Volume 29, highlights new advances in the field, with this new volume presenting interesting chapters written by an international board of authors on topics such as spin-orbit torque. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Handbook of Magnetic Materials series

Download or read book Properties of Materials written by Robert E. Newnham and published by Oxford University Press. This book was released on 2005 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystals are sometimes called 'Flowers of the Mineral Kingdom'. In addition to their great beauty, crystals and other textured materials are enormously useful in electronics, optics, acoustics and many other engineering applications. This richly illustrated text describes the underlying principles of crystal physics and chemistry, covering a wide range of topics and illustrating numerous applications in many fields of engineering using the most important materials today. Tensors, matrices, symmetry and structure-property relationships form the main subjects of the book. While tensors and matrices provide the mathematical framework for understanding anisotropy, on which the physical and chemical properties of crystals and textured materials often depend, atomistic arguments are also needed to quantify the property coefficients in various directions. The atomistic arguments are partly based on symmetry and partly on the basic physics and chemistry of materials. After introducing the point groups appropriate for single crystals, textured materials and ordered magnetic structures, the directional properties of many different materials are described: linear and nonlinear elasticity, piezoelectricity and electrostriction, magnetic phenomena, diffusion and other transport properties, and both primary and secondary ferroic behavior. With crystal optics (its roots in classical mineralogy) having become an important component of the information age, nonlinear optics is described along with the piexo-optics, magneto-optics, and analogous linear and nonlinear acoustic wave phenomena. Enantiomorphism, optical activity, and chemical anisotropy are discussed in the final chapters of the book.

Download or read book Nondestructive Characterization of Materials written by Paul Höller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is "bearable"? First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.

Download or read book Advanced Materials Processes Incorporating Metal Progress written by and published by . This book was released on 1988 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Applications of X Ray Diffraction written by Frank Smith and published by CRC Press. This book was released on 1999-09-22 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: By illustrating a wide range of specific applications in all major industries, this work broadens the coverage of X-ray diffraction beyond basic tenets, research and academic principles. The book serves as a guide to solving problems faced everyday in the laboratory, and offers a review of the current theory and practice of X-ray diffraction, major

Download or read book Handbook of Magnetic Materials written by E.P. Wohlfarth and published by Elsevier. This book was released on 1986-08 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Magnetic Materials has a dual purpose; as a textbook, it provides an introduction to a given topic within magnetism, and as a work of reference, it serves scientists active in magnetism research. To fulfill these two goals, each chapter in the Handbook is written by leading authorities in the field, and combines state-of-the-art research results with an extensive compilation of archival knowledge. Magnetism is a rapidly expanding field which constantly continues to encompass new phenomena. Examples of such subfields of magnetism are quadrupolar interactions, magnetic superconductors, and quasiscrystals: topics that are all covered in the present volume. The only common ground between these new materials and ferromagnets, is the possession of a magnetic moment; the series title has been slightly adjusted to reflect this. But in keeping with tradition, the Handbook of Magnetic Materials continues to allow readers to acquaint themselves in great depth with topics through the entire breadth of magnetism research.

Download or read book Handbook of Magnetic Materials written by and published by Elsevier. This book was released on 2015-11-24 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Magnetic Materials covers the expansion of magnetism over the last few decades and its applications in research, notably the magnetism of several classes of novel materials that share with truly ferromagnetic materials the presence of magnetic moments. Volume 24 of the Handbook of Magnetic Materials, much like the preceding volumes, has a dual purpose. With contributions from leading authorities in the field, it includes a variety of self-contained introductions to a given area in the field of magnetism without requiring recourse to the published literature. The book is an ideal reference for scientists active in magnetism research, providing readers with novel trends and achievements in magnetism. Each article contains an extensive description given in graphical, as well as, tabular form, with much emphasis placed on the discussion of the experimental material within the framework of physics, chemistry, and material science. - Comprises topical review articles written by leading authorities - Includes a variety of self-contained introductions to a given area in the field of magnetism without requiring recourse to the published literature - Introduces given topics in the field of magnetism - Describes novel trends and achievements in magnetism

Download or read book Concise Encyclopedia of Magnetic and Superconducting Materials written by K.H.J. Buschow and published by Elsevier. This book was released on 2005-12-28 with total page 1361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic and superconducting materials pervade every avenue of the technological world – from microelectronics and mass-data storage to medicine and heavy engineering. Both areas have experienced a recent revitalisation of interest due to the discovery of new materials, and the re-evaluation of a wide range of basic mechanisms and phenomena.This Concise Encyclopedia draws its material from the award-winning Encyclopedia of Materials and Engineering, and includes updates and revisions not available in the original set -- making it the ideal reference companion for materials scientists and engineers with an interest in magnetic and superconducting materials. - Contains in excess of 130 articles, taken from the award-winning Encyclopedia of Materials: Science and Technology, including ScienceDirect updates not available in the original set - Each article discusses one aspect of magnetic and superconducting materials and includes photographs, line drawings and tables to aid the understanding of the topic at hand - Cross-referencing guides readers to articles covering subjects of related interest