Download or read book Textile Pesticide Penetration Using XPS and FTIR PAS written by Kathryn Van Peursem and published by . This book was released on 1988 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Barrier Performance and Classification of Protective Apparel and Drapes Intended for Use in Health Care Facilities written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Establishes minimum barrier performance requirements, a classification system, and associated labeling requirements for protective apparel, surgical drapes, and drape accessories intended for use in health care facilities"--Title page.

Download or read book Indoor Environment written by Lidia Morawska and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamentals of air-borne particles and settled dust in the indoor environment, this handy reference investigates: * relevant definitions and terminology, * characteristics, * sources, * sampling techniques and instrumentation, * exposure assessment, * monitoring methods. The result is a useful and comprehensive overview for chemists, physicists and biologists, postgraduate students, medical practitioners, occupational health professionals, building owners and managers, building, construction and air-conditioning engineers, architects, environmental lawyers, government and regulatory professionals.

Download or read book Nano and Bio Based Technologies for Wastewater Treatment written by Elvis Fosso-Kankeu and published by John Wiley & Sons. This book was released on 2019-05-21 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents recent challenges related to new forms of pollution from industries and discusses adequate state-of-the-art technologies capable to remediate such forms of pollution. Over the past few decades the boom in the industrial sector has contributed to the release in the environment of pollutants that have no regulatory status and which may have significant impact on the health of humans and animals. These pollutants also referred to as "emerging pollutants", are mostly aromatic compounds which derive from excretion of pharmaceutical, industrial effluents and municipal discharge. It is recurrent these days to find water treatment plants which no longer produce water that fits the purpose of domestic consumption based on newly established guidelines. This situation has prompted water authorities and researchers to develop tools for proper prediction and control of the dispersion of pollutants in the environment to ensure that appropriate measures are taken to prevent the occurrence of outbreaks due to sudden load of these pollutants in the water system. The chapters in this book cover a wide range of nano and bio-based techniques that have been designed for the real time detection of emerging contaminants in environmental water sources, geochemical models that are continuously improved for the prediction of inorganic contaminants migration from the mine solid wastes into ground and surface waters. Remediation strategies are also discussed and include effective techniques based on nanotechnology, advanced membrane filtration, oxidative and bio-degradation processes using various types of nanocatalysts, biocatalysts or supporting polymer matrices which are under advanced investigations for their implementation at large scale for the removal of recalcitrant pollutants from polluted water. Nano and Bio-Based Technologies for Wastewater Treatment: Prediction and Control Tools for the Dispersion of Pollutants in the Environment is divided is two sections. The first section covers the occurrence of emerging pollutants in environmental water while the second section covers state-of-the-art research on the removal of emerging pollutants from water using sustainable technologies. A total of 13 chapters addressing various topics related to the two sections are essentially based on recent developments in the respective field which could have a significant impact on the enhancement of the performance of wastewater treatment plants around the world, and especially in developing countries where access to clean and safe water remains a daily challenge.

Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Download or read book Ecological Wisdom Inspired Restoration Engineering written by Varenyam Achal and published by Springer. This book was released on 2018-08-24 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on ecological wisdom inspired restoration engineering through theories, hypotheses, policies, practical understanding, and case studies. Understanding nature’s processes is a prerequisite for the healthy and sustainable functioning of a habitable Earth. As such, the book provides a guide for readers seeking to understand and build sustainable, urban socio-ecological systems using restoration technologies based on wisdom. Motivated by recent rapid advances in restoration engineering, such as the role of green building materials in urban infrastructures, and developing sustainable landscapes to benefit the environment, economy and communities, it is an essential reference on the most promising innovative technologies. It discusses engineering methods and practices in the restoration of soil, water, heritage sites, and other ecosystems, as well as the development and applications of green building materials. It presents a holistic and systematic approach that utilizes natural resources and the concept of ecological wisdom to reap sustainable environmental, economic and social benefits to fulfill the concept of living in harmony with nature. This book is a valuable resource for civil- and environmental engineering researchers as well as organizations engaged in eco-restoration practices.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book The Chemistry of Silica written by Ralph K. Iler and published by Wiley-Interscience. This book was released on 1979-06-06 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants and Interfacial Phenomena Milton J. Rosen Bridging the gap between purely theoretical aspects of surface chemistry and the purely empirical experience of the industrial technologist, this book applies theoretical surface chemistry to understanding the action of surfactants in modifying interfacial phenomena. It surveys the structural types of commercially available surfactants and discusses interfacial phenomena, the physicochemical principles underlying the action of surfactants in each phenomenon, and the effect of structural changes in the surfactants and environmental changes on their action. Tables of data on various interfacial properties of surfactants, compiled and calculated from the latest scientific literature, are included. 1978 304 pp. An Introduction to Clay Colloid Chemistry, 2nd Ed. H. van Olphen This book provides valuable guidance in research and design efforts by giving a clear understanding of principles and concepts of colloid chemistry as applied to clay systems. Updated and enlarged, this edition includes new information on surface characterization and adsorption mechanisms; recent results in the area of clay-organic interaction--the intercalation and intersalation of kaolinite minerals; and increased attention to the possible role of clays in biological evolution. 1977 318 pp. Physicochemical Processes for Water Quality Control Walter J. Weber, Jr. Focusing on physicochemical rather than biological processes, this book presents a comprehensive treatise on the treatment of municipal and industrial water and wastewater. All of the physicochemical processes important to municipal and industrial water and wastewater treatment--coagulation, filtration, membrane processes, chemical oxidation, and others--are included and each is covered thoroughly from principle through application. To maintain a high level of expertise, contributions have been incorporated from specialists actively involved in research or engineering applications in each area considered. 1972 640 pp.

Download or read book Surface Modification of Biopolymers written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses surface modification techniques, which are critical for tailoring and broadening the applications of naturally occurring biopolymers. Biopolymers represent a sustainable solution to the need for new materials in the auto, waste removal, biomedical device, building material, defense, and paper industries. Features: First comprehensive summary of biopolymer modification methods to enhance compatibility, flexibility, enhanced physicochemical properties, thermal stability, impact response, and rigidity, among others Address of a green, eco-friendly materials that is increasing in use, underscoring the roles of material scientists in the future of new "green" bioolymer material use Coverage applications in automotive development, hazardous waste removal, biomedical engineering, pulp and paper industries, development of new building materials, and defense-related technologies Facilitation of technology transfer

Download or read book Combined and Hybrid Adsorbents written by José M. Loureiro and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows up an Advanced Research Workshop dedicated to the subject of adsorption. It presents an up-to-date review of the latest achievements in the synthesis, characterization and applications of hybrid organic-inorganic materials and of carbon and combined adsorbents. The modeling of the adsorption process, including the simulation of carbon masks used for both civil and military protection purposes is also addressed. Includes applications in environmental, military and post-disaster situations.

Download or read book Spectroscopy of Polymers written by J.L. Koenig and published by Elsevier. This book was released on 1999-09-16 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated Second Edition of the best-selling reference/text is essential reading for students and scientists who seek a thorough and practical introduction to the field of polymer spectroscopy. Eleven chapters cover the fundamental aspects and experimental applications of the primary spectroscopic methods. The advantages and disadvantages of the various techniques for particular polymer systems are also discussed. The goal of the author is not to make the reader an expert in the field, but rather to provide enough information about the different spectroscopic methods that the reader can determine how the available techniques can be used to solve a particular polymer problem. This Second Edition contains new and updated information on techniques in IR and NMR, as well as an all-new chapter on Mass Spectrometry.

Download or read book Biosensors for Direct Monitoring of Environmental Pollutants in Field written by D.P. Nikolelis and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosensors offer clear and distinct advantages over standard analytical methods for the direct monitoring of environmental pollutants in the field, such as real-time detection with minimum sample preparation and handling. The present book highlights recent advantages that will be of great value to a range of scientists, researchers and students dealing with analytical and environmental chemistry and biosensor technology. It presents recent trends in analytical methodology for the determination of indoor and outdoor pollutants, advances in DNA, biological and recognition-based sensors, examples of biosensors for use in field and water analysis, biosensors based on non-aqueous systems, and recent advances in the miniaturisation and micromachining of biosensors.

Download or read book Wood Modification written by Callum A. S. Hill and published by John Wiley & Sons. This book was released on 2007-02-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.

Download or read book Renewable Energy and Sustainable Buildings written by Ali Sayigh and published by Springer Nature. This book was released on 2019-08-30 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers presented during the World Renewable Energy Network’s 28thanniversary congress at the University of Kingston in London. The forum highlighted the integration of renewables and sustainable buildings as the best means to combat climate change. In-depth chapters written by the world’s leading experts highlight the most current research and technological breakthroughs and discuss policy, renewable energy technologies and applications in all sectors – for heating and cooling, agricultural applications, water, desalination, industrial applications and for the transport sectors. Presents cutting-edge research in green building and renewable energy from all over the world; Covers the most up-to-date research developments, government policies, business models, best practices and innovations; Contains case studies and examples to enhance practical application of the technologies.

Download or read book Physical and Chemical Processes in the Aquatic Environment written by Erik R. Christensen and published by John Wiley & Sons. This book was released on 2014-09-15 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is need in environmental research for a book on fresh waters including rivers and lakes. Compared with other books on the topic, this book has a unique outline in that it follows pollution from sources to impact. Included in the text is the treatment of various tracers, ranging from pathogens to stable isotopes of elements and providing a comprehensive discussion which is lacking in many other books on pollution control of natural waters. Geophysical processes are discussed emphasizing mixing of water, interaction between water and the atmosphere, and sedimentation processes. Important geochemistry processes occurring in natural waters are described as are the processes specific to nutrients, organic pollutants, metals, and pathogens in subsequent chapters. Each of these chapters includes an introduction on the selected groups, followed by the physicochemical properties which are the most relevant to their behavior in natural waters, and the theories and models to describe their speciation, transport and transformation. The book also includes the most up to date information including a discussion on emerging pollutants such as brominated and phosphate flame retardants, perflurochemicals, and pharmaceutical and personal care products. Due to its importance an ecotoxicology chapter has been included featuring molecular biological methods, nanoparticles, and comparison of the basis of biotic ligand model with the Weibull dose-response model. Finally, the last chapter briefly summarizes the regulations on ambient water quality.

Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.

Download or read book Nanotechnology in Diagnosis Treatment and Prophylaxis of Infectious Diseases written by Mahendra Rai and published by Academic Press. This book was released on 2015-05-23 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Diagnosis, Treatment and Prophylaxis of Infectious Diseases delivers comprehensive coverage of the application of nanotechnology to pressing problems in infectious disease. This text equips readers with cutting-edge knowledge of promising developments and future prospects in nanotechnology, paying special attention to microbes that are now resistant to conventional antibiotics, a concerning problem in modern medicine. Readers will find a thorough discussion of this new approach to infectious disease treatment, including the reasons nanotechnology presents a promising avenue for the diagnosis, treatment, and prophylaxis of infectious diseases. - Provides a comprehensive overview of the use of nanotechnology in the treatment and diagnosis of infectious diseases - Covers all common types of infective agents, including bacteria, viruses, fungi, and protozoa, along with their vectors, ticks, mosquitoes, flies, etc. - Delivers commentary from an international researcher base, providing insights across differing economic statuses - Includes a foundation of basic nanotechnological concepts to aid in designing new strategies to combat several pathogenic diseases and cancer - Illustrates the high antimicrobial potential of nanoparticles, ultimately demonstrating how they are a promising alternative class that can be successfully used in fighting a myriad of infections