Download or read book Testing of an Innovative Metal Nanothread Heat Flux Sensor written by Héctor Sánchez Vicente and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal sensors are currently highly used in building applications to assess losses and determine possible thermal bridges. However, in some cases they are not useful enough because of the field conditions or, sometimes, due to the dimensions of the sensor. This thesis aims to calibrate and test a new product developed by JonDeTech AB company; a tiny heat flux - temperature sensor based on metal nanothreads and a vertical or "out-of-the-plane" thread arrangement. It may have a bright future in measuring local heat flux through building and installation components owing to its tininess. Three methods have been applied. First, calibration with a specific device designed for this purpose in a controlled environment. Second, field test measurements within an ongoing project by Gävle University in Gävle city hall historical building. And third, finite element simulations where the experimental scenarios were replicated. By these methods it was possible to apply corrections on the experimental procedures and make this work more accurate. It was also determined, the calibration curve of the sensor and a slight temperature dependency. In the field measurements, the output of the new heat flux sensor (using the calibration curves) was compared with output from a heat flux sensor available on the market. There is a good correspondence in the dynamics of the two sensors output, but there are discrepancies in the order of magnitude. Finite element simulations indicate that differences in the incidental direction of heat through the sensor are different in-situ and calibration, thus affecting results. Larger deviations are obtained for lower heat flux values (
Download or read book Testing and Calibration of a Microfabricated Heat Flux Sensor written by Sorin Stefanescu and published by . This book was released on 1997 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.
Download or read book Optical Antennas written by Mario Agio and published by Cambridge University Press. This book was released on 2013-01-03 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This consistent and systematic review of recent advances in optical antenna theory and practice brings together leading experts in the fields of electrical engineering, nano-optics and nano-photonics, physical chemistry and nanofabrication. Fundamental concepts and functionalities relevant to optical antennas are explained, together with key principles for optical antenna modelling, design and characterisation. Recognising the tremendous potential of this technology, practical applications are also outlined. Presenting a clear translation of the concepts of radio antenna design, near-field optics and field-enhanced spectroscopy into optical antennas, this interdisciplinary book is an indispensable resource for researchers and graduate students in engineering, optics and photonics, physics and chemistry.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book The Realization of Star Trek Technologies written by Mark E. Lasbury and published by Springer. This book was released on 2016-08-24 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Star Trek celebrates its 50th anniversary, the futuristic tools of Kirk, Spock, Scott, and McCoy continue to come to life. This book merges Star Trek scientific lore—how the science of the time informed the implementation of technology in the series—and the science as it is playing out today. Scientists and engineers have made and continue to develop replicators, teletransporters, tractor beams, and vision restoring visors. This book combines the vision of 1966 science fiction with the latest research in physics, biotechnology, and engineering.
Download or read book Thermoplasmonics written by Guillaume Baffou and published by Cambridge University Press. This book was released on 2017-10-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasmonics is an important branch of optics concerned with the interaction of metals with light. Under appropriate illumination, metal nanoparticles can exhibit enhanced light absorption, becoming nanosources of heat that can be precisely controlled. This book provides an overview of the exciting new field of thermoplasmonics and a detailed discussion of its theoretical underpinning in nanophotonics. This topic has developed rapidly in the last decade, and is now a highly-active area of research due to countless applications in nanoengineering and nanomedicine. These important applications include photothermal cancer therapy, drug and gene delivery, nanochemistry and photothermal imaging. This timely and self-contained text is suited to all researchers and graduate students working in plasmonics, nano-optics and thermal-induced processes at the nanoscale.
Download or read book Electrochemical Oxygen Reduction written by Pei Kang Shen and published by Springer Nature. This book was released on 2021-01-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses systematically the theoretical research and the applications of electrochemical oxygen reduction. Oxygen reduction reaction is a common issue in electrochemistry, but is also an important process involved in the field of energy, cryogenic fuel cells, metal–air cells, oxygen sensors and hydrogen peroxide preparation. This book is divided into 6 chapters; it starts with a description of dynamic mechanisms, followed by a detailed introduction on the related experimental methods and related catalyst preparation technology. By providing the basic methods and testing techniques, and by demonstrating their applications, it helps readers gain a better understanding of oxygen reduction reactions, making it a valuable resource for the industrialization of scientific research achievements. Accordingly, the book appeals to a broad readership, particularly graduate students, those working at universities and research organizations, and industrial researchers.
Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2013-09-16 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines. First book to explore the production and applications of macro-scale materials made from nano-scale particles Sets out the processes for producing macro-scale materials from carbon nanotubes, and describes the unique properties of these materials Potential applications for CNT fiber/yarn include replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Reinforced Polymer Composites written by Victor V. Tcherdyntsev and published by MDPI. This book was released on 2021-09-01 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, consisting of 21 articles, including three review papers, written by research groups of experts in the field, considers recent research on reinforced polymer composites. Most of them relate to the fiber-reinforced polymer composites, which are a real hot topic in the field. Depending on the reinforcing fiber nature, such composites are divided into synthetic and natural fiber-reinforced ones. Synthetic fibers, such as carbon, glass, or basalt, provide more stiffness, while natural fibers, such as jute, flax, bamboo, kenaf, and others, are inexpensive and biodegradable, making them environmentally friendly. To acquire the benefits of design flexibility and recycling possibilities, natural reinforcers can be hybridized with small amounts of synthetic fibers to make them more desirable for technical applications. Elaborated composites have great potential as structural materials in automotive, marine and aerospace application, as fire resistant concrete, in bridge systems, as mechanical gear pair, as biomedical materials for dentistry and orthopedic application and tissue engineering, as well as functional materials such as proton-exchange membranes, biodegradable superabsorbent resins and polymer electrolytes.
Download or read book Nanozymes From Rational Design to Biomedical Applications written by Kelong Fan and published by Frontiers Media SA. This book was released on 2021-05-31 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes Synthesis Characterization and Applications written by Kamal K. Kar and published by Research Publishing Service. This book was released on 2011 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal and Semiconductor Nanocrystals written by Jing Zhao and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Reverse Osmosis and Nanofiltration M46 written by AWWA Staff and published by American Water Works Association. This book was released on 2011-01-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Gallery of Fluid Motion written by M. Samimy and published by Cambridge University Press. This book was released on 2004-01-12 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The visualization of fluid flow has played a major role in the development of fluid dynamics and its applications, from the evolution of flight to tracking weather, and understanding the flow of blood. The Fluid Dynamics Division of the American Physical Society sponsors an annual competition for outstanding images of fluid flow. This volume includes a selection of winners from 1985 to the present. Each image is accompanied by some explanatory text, making the volume an important acquisition for anyone involved in fluid flow research.
Download or read book Advanced Nanomaterials written by Kurt E. Geckeler and published by John Wiley & Sons. This book was released on 2009-11-10 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first comprehensive compilation of review chapters on this hot topic, more than 30 experts from around the world provide in-depth chapters on their specific areas of expertise, covering such essential topics as: * Block Copolymer Systems, Nanofibers and Nanotubes * Helical Polymer-Based Supramolecular Films * Synthesis of Inorganic Nanotubes * Gold Nanoparticles and Carbon Nanotubes * Recent Advances in Metal Nanoparticle-Attached Electrodes * Oxidation Catalysis by Nanoscale Gold, Silver, and Copper * Concepts in Self-Assembly * Nanocomposites * Amphiphilic Poly(Oxyalkylene)-Amines * Mesoporous Alumina * Nanoceramics for Medical Applications * Ecological Toxicology of Engineered Carbon Nanoparticles * Molecular Imprinting * Near-Field Raman Imaging of Nanostructures and Devices * Fullerene-Rich Nanostructures * Interactions of Carbon Nanotubes with Biomolecules * Nanoparticle-Cored Dendrimers and Hyperbranched Polymers * Nanostructured Organogels via Molecular Self-Assembly * Structural DNA Nanotechnology With its coverage of all such important areas as self-assembly, polymeric materials, bionanomaterials, nanotubes, photonic and environmental aspects, this is an essential reference for materials scientists, engineers, chemists, physicists and biologists wishing to gain an in-depth knowledge of all the disciplines involved.
