Download or read book Testing and Reliable Design of CMOS Circuits written by Niraj K. Jha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years CMOS technology has become increas ingly dominant for realizing Very Large Scale Integrated (VLSI) circuits. The popularity of this technology is due to its high den sity and low power requirement. The ability to realize very com plex circuits on a single chip has brought about a revolution in the world of electronics and computers. However, the rapid advance ments in this area pose many new problems in the area of testing. Testing has become a very time-consuming process. In order to ease the burden of testing, many schemes for designing the circuit for improved testability have been presented. These design for testability techniques have begun to catch the attention of chip manufacturers. The trend is towards placing increased emphasis on these techniques. Another byproduct of the increase in the complexity of chips is their higher susceptibility to faults. In order to take care of this problem, we need to build fault-tolerant systems. The area of fault-tolerant computing has steadily gained in importance. Today many universities offer courses in the areas of digital system testing and fault-tolerant computing. Due to the impor tance of CMOS technology, a significant portion of these courses may be devoted to CMOS testing. This book has been written as a reference text for such courses offered at the senior or graduate level. Familiarity with logic design and switching theory is assumed. The book should also prove to be useful to professionals working in the semiconductor industry.
Download or read book On Reliable Design of CMOS Circuits written by Sivaramakrishnan Subramanian and published by . This book was released on 1992 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques for hierarchical design of self-checking CMOS VLSIcircuits and BIST implementation for sequential VLSI circuits are presented.
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book CMOS Logic Circuit Design written by John P. Uyemura and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date treatment of the analysis and design of CMOS integrated digital logic circuits. The self-contained book covers all of the important digital circuit design styles found in modern CMOS chips, emphasizing solving design problems using the various logic styles available in CMOS.
Download or read book CMOS Electronics written by Jaume Segura and published by John Wiley & Sons. This book was released on 2004-03-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS manufacturing environments are surrounded with symptoms that can indicate serious test, design, or reliability problems, which, in turn, can affect the financial as well as the engineering bottom line. This book educates readers, including non-engineers involved in CMOS manufacture, to identify and remedy these causes. This book instills the electronic knowledge that affects not just design but other important areas of manufacturing such as test, reliability, failure analysis, yield-quality issues, and problems. Designed specifically for the many non-electronic engineers employed in the semiconductor industry who need to reliably manufacture chips at a high rate in large quantities, this is a practical guide to how CMOS electronics work, how failures occur, and how to diagnose and avoid them. Key features: Builds a grasp of the basic electronics of CMOS integrated circuits and then leads the reader further to understand the mechanisms of failure. Unique descriptions of circuit failure mechanisms, some found previously only in research papers and others new to this publication. Targeted to the CMOS industry (or students headed there) and not a generic introduction to the broader field of electronics. Examples, exercises, and problems are provided to support the self-instruction of the reader.
Download or read book Testing for Small Delay Defects in Nanoscale CMOS Integrated Circuits written by Sandeep K. Goel and published by CRC Press. This book was released on 2017-12-19 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in design methods and process technologies have resulted in a continuous increase in the complexity of integrated circuits (ICs). However, the increased complexity and nanometer-size features of modern ICs make them susceptible to manufacturing defects, as well as performance and quality issues. Testing for Small-Delay Defects in Nanoscale CMOS Integrated Circuits covers common problems in areas such as process variations, power supply noise, crosstalk, resistive opens/bridges, and design-for-manufacturing (DfM)-related rule violations. The book also addresses testing for small-delay defects (SDDs), which can cause immediate timing failures on both critical and non-critical paths in the circuit. Overviews semiconductor industry test challenges and the need for SDD testing, including basic concepts and introductory material Describes algorithmic solutions incorporated in commercial tools from Mentor Graphics Reviews SDD testing based on "alternative methods" that explores new metrics, top-off ATPG, and circuit topology-based solutions Highlights the advantages and disadvantages of a diverse set of metrics, and identifies scope for improvement Written from the triple viewpoint of university researchers, EDA tool developers, and chip designers and tool users, this book is the first of its kind to address all aspects of SDD testing from such a diverse perspective. The book is designed as a one-stop reference for current industrial practices, research challenges in the domain of SDD testing, and recent developments in SDD solutions.
Download or read book Design Analysis and Test of Logic Circuits Under Uncertainty written by Smita Krishnaswamy and published by Springer Science & Business Media. This book was released on 2012-09-21 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Logic circuits are becoming increasingly susceptible to probabilistic behavior caused by external radiation and process variation. In addition, inherently probabilistic quantum- and nano-technologies are on the horizon as we approach the limits of CMOS scaling. Ensuring the reliability of such circuits despite the probabilistic behavior is a key challenge in IC design---one that necessitates a fundamental, probabilistic reformulation of synthesis and testing techniques. This monograph will present techniques for analyzing, designing, and testing logic circuits with probabilistic behavior.
Download or read book Defect Oriented Testing for Nano Metric CMOS VLSI Circuits written by Manoj Sachdev and published by Springer Science & Business Media. This book was released on 2007-06-04 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd edition of defect oriented testing has been extensively updated. New chapters on Functional, Parametric Defect Models and Inductive fault Analysis and Yield Engineering have been added to provide a link between defect sources and yield. The chapter on RAM testing has been updated with focus on parametric and SRAM stability testing. Similarly, newer material has been incorporated in digital fault modeling and analog testing chapters. The strength of Defect Oriented Testing for nano-Metric CMOS VLSIs lies in its industrial relevance.
Download or read book Testing and Design for Testability of CMOS Logic Circuits written by Qiao Tong and published by . This book was released on 1990 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectronic Test Structures for CMOS Technology written by Manjul Bhushan and published by Springer Science & Business Media. This book was released on 2011-08-26 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronic Test Structures for CMOS Technology and Products addresses the basic concepts of the design of test structures for incorporation within test-vehicles, scribe-lines, and CMOS products. The role of test structures in the development and monitoring of CMOS technologies and products has become ever more important with the increased cost and complexity of development and manufacturing. In this timely volume, IBM scientists Manjul Bhushan and Mark Ketchen emphasize high speed characterization techniques for digital CMOS circuit applications and bridging between circuit performance and characteristics of MOSFETs and other circuit elements. Detailed examples are presented throughout, many of which are equally applicable to other microelectronic technologies as well. The authors’ overarching goal is to provide students and technology practitioners alike a practical guide to the disciplined design and use of test structures that give unambiguous information on the parametrics and performance of digital CMOS technology.
Download or read book An Introduction to Logic Circuit Testing written by Parag K. Lala and published by Springer Nature. This book was released on 2022-06-01 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Logic Circuit Testing provides a detailed coverage of techniques for test generation and testable design of digital electronic circuits/systems. The material covered in the book should be sufficient for a course, or part of a course, in digital circuit testing for senior-level undergraduate and first-year graduate students in Electrical Engineering and Computer Science. The book will also be a valuable resource for engineers working in the industry. This book has four chapters. Chapter 1 deals with various types of faults that may occur in very large scale integration (VLSI)-based digital circuits. Chapter 2 introduces the major concepts of all test generation techniques such as redundancy, fault coverage, sensitization, and backtracking. Chapter 3 introduces the key concepts of testability, followed by some ad hoc design-for-testability rules that can be used to enhance testability of combinational circuits. Chapter 4 deals with test generation and response evaluation techniques used in BIST (built-in self-test) schemes for VLSI chips. Table of Contents: Introduction / Fault Detection in Logic Circuits / Design for Testability / Built-in Self-Test / References
Download or read book Essentials of Electronic Testing for Digital Memory and Mixed Signal VLSI Circuits written by M. Bushnell and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.
Download or read book Circuit Design for CMOS VLSI written by John P. Uyemura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, CMOS has become increasingly attractive as a basic integrated circuit technology due to its low power (at moderate frequencies), good scalability, and rail-to-rail operation. There are now a variety of CMOS circuit styles, some based on static complementary con ductance properties, but others borrowing from earlier NMOS techniques and the advantages of using clocking disciplines for precharge-evaluate se quencing. In this comprehensive book, the reader is led systematically through the entire range of CMOS circuit design. Starting with the in dividual MOSFET, basic circuit building blocks are described, leading to a broad view of both combinatorial and sequential circuits. Once these circuits are considered in the light of CMOS process technologies, impor tant topics in circuit performance are considered, including characteristics of interconnect, gate delay, device sizing, and I/O buffering. Basic circuits are then composed to form macro elements such as multipliers, where the reader acquires a unified view of architectural performance through par allelism, and circuit performance through careful attention to circuit-level and layout design optimization. Topics in analog circuit design reflect the growing tendency for both analog and digital circuit forms to be combined on the same chip, and a careful treatment of BiCMOS forms introduces the reader to the combination of both FET and bipolar technologies on the same chip to provide improved performance.
Download or read book Testable and Self checking Design of CMOS Circuits written by Manjit Singh Cheema and published by . This book was released on 1992 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS Test and Evaluation written by Manjul Bhushan and published by Springer. This book was released on 2014-12-03 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Test and Evaluation: A Physical Perspective is a single source for an integrated view of test and data analysis methodology for CMOS products, covering circuit sensitivities to MOSFET characteristics, impact of silicon technology process variability, applications of embedded test structures and sensors, product yield, and reliability over the lifetime of the product. This book also covers statistical data analysis and visualization techniques, test equipment and CMOS product specifications, and examines product behavior over its full voltage, temperature and frequency range.
Download or read book Symbolic Analysis for Automated Design of Analog Integrated Circuits written by Georges Gielen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a great honor to provide a few words of introduction for Dr. Georges Gielen's and Prof. Willy Sansen's book "Symbolic analysis for automated design of analog integrated circuits". The symbolic analysis method presented in this book represents a significant step forward in the area of analog circuit design. As demonstrated in this book, symbolic analysis opens up new possibilities for the development of computer-aided design (CAD) tools that can analyze an analog circuit topology and automatically size the components for a given set of specifications. Symbolic analysis even has the potential to improve the training of young analog circuit designers and to guide more experienced designers through second-order phenomena such as distortion. This book can also serve as an excellent reference for researchers in the analog circuit design area and creators of CAD tools, as it provides a comprehensive overview and comparison of various approaches for analog circuit design automation and an extensive bibliography. The world is essentially analog in nature, hence most electronic systems involve both analog and digital circuitry. As the number of transistors that can be integrated on a single integrated circuit (IC) substrate steadily increases over time, an ever increasing number of systems will be implemented with one, or a few, very complex ICs because of their lower production costs.
Download or read book Introduction to Microelectronics to Nanoelectronics written by Manoj Kumar Majumder and published by CRC Press. This book was released on 2020-11-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focussing on micro- and nanoelectronics design and technology, this book provides thorough analysis and demonstration, starting from semiconductor devices to VLSI fabrication, designing (analog and digital), on-chip interconnect modeling culminating with emerging non-silicon/ nano devices. It gives detailed description of both theoretical as well as industry standard HSPICE, Verilog, Cadence simulation based real-time modeling approach with focus on fabrication of bulk and nano-devices. Each chapter of this proposed title starts with a brief introduction of the presented topic and ends with a summary indicating the futuristic aspect including practice questions. Aimed at researchers and senior undergraduate/graduate students in electrical and electronics engineering, microelectronics, nanoelectronics and nanotechnology, this book: Provides broad and comprehensive coverage from Microelectronics to Nanoelectronics including design in analog and digital electronics. Includes HDL, and VLSI design going into the nanoelectronics arena. Discusses devices, circuit analysis, design methodology, and real-time simulation based on industry standard HSPICE tool. Explores emerging devices such as FinFETs, Tunnel FETs (TFETs) and CNTFETs including their circuit co-designing. Covers real time illustration using industry standard Verilog, Cadence and Synopsys simulations.
