Download or read book Tensile Deformation of SiC Ti 15 3 Laminates written by BA. Lerch and published by . This book was released on 1993 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The damage mechanisms of a laminated, continuous SiC fiber-reinforced Ti-15-3 composite were investigated. Specimens consisting of unidirectional as well as cross-ply laminates were pulled in tension to failure at room temperature and 427°C and subsequently examined metallographically. Selected specimens were interrupted at various strain increments and examined to document the development of damage. When possible, a micromechanical stress analysis was performed to aid in the explanation of the observed damage. The analyses provided average constituent microstresses and laminate stresses and strains. The damage states were found to be highly influenced by the fiber architecture.
Download or read book Tensile Deformation Damage in SiC Reinforced Ti 15V 3Cr 3Al 3Sn written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-12 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The damage mechanisms of a laminated, continuous SiC fiber reinforced Ti-15V-3Cr-3Al-3Sn (Ti-15-3) composite were investigated. Specimens consisting of unidirectional as well as cross-ply laminates were pulled in tension to failure at room temperature and 427 C and subsequently examined metallographically. Selected specimens were interrupted at various strain increments and examined to document the development of damage. When possible, a micromechanical stress analysis was performed to aid in the explanation of the observed damage. The analyses provide average constituent microstresses and laminate stresses and strains. It was found that the damage states were dependent upon the fiber architecture. Lerch, Bradley A. and Saltsman, James F. Glenn Research Center RTOP 510-01-50...
Download or read book Composite Materials written by Eugene T. Camponeschi and published by ASTM International. This book was released on 1993 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fully Coupled Micro Macro Deformation Damage and Failure Prediction for SiC Ti 15 3 Laminates written by and published by . This book was released on 2001 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Technology 2001 written by and published by DIANE Publishing. This book was released on with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Matrix Plasticity in SiC Ti 15 3 Composite written by and published by . This book was released on 1991 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Life Prediction Methodology for Titanium Matrix Composites written by W. Steven Johnson and published by ASTM International. This book was released on 1996 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the March 1994 symposium are organized into five sections that progress from basic understanding of mechanical damage mechanisms and environmental effects to life prediction methodology. Five papers discuss the interplay between interfacial strength, residual thermal stresses, an
Download or read book Metal Matrix Composities written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2013-09-18 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth volume of this six-volume compendium includes properties on metal matrix composite material systems for which data meeting the specific requirements of the handbook are available. In addition, it provides selected guidance on other technical topics related to this class of composites, including material selection, material specification, processing, characterization testing, data reduction, design, analysis, quality control, and repair of typical metal matrix composite materials. The Composite Materials Handbook, referred to by industry groups as CMH-17, is a six-volume engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials.
Download or read book Titanium Matrix Composites written by Shankar Mall and published by CRC Press. This book was released on 2020-01-29 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review and summary of advancements related to mechanical behavior and related mechanics issues of titanium matrix composites (TMCs), a class of high-temperature materials useful in the propulsion and airframe components in advanced aerospace systems. After an introduction to TMCs, different authors review and summarise the advancements related to mechanical behavior and related mechanics issues of TMCs.
Download or read book American Society of Composites Ninth International Conference Proceedings written by Amer Society Composi and published by CRC Press. This book was released on 1994-09-23 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strength of Fibrous Composites written by Zheng-Ming Huang and published by Springer Science & Business Media. This book was released on 2012-03-30 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Strength of Fibrous Composites" addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials. Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China. Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage and Interfacial Debonding in Composites written by D.H. Allen and published by Elsevier. This book was released on 1996-07-18 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading authorities in the field of damage and micromechanics of composites, this book deals mainly with the damage impaired in composites due to different types of loading. It examines the different types of damage in composites in the fiber, matrix, debonding and delamination. It also reviews the theoretical characterization of damage, its experimental determination as well as the numerical simulation of damage.
Download or read book Fully Coupled Micro Macro Deformation Damage and Failure Prediction for Sic Ti 15 3 Laminates written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-15 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deformation, failure, and low cycle fatigue life of SCS-6/Ti-15-3 composites are predicted using a coupled deformation and damage approach in the context of the analytical generalized method of cells (GMC) micromechanics model. The local effects of inelastic deformation, fiber breakage, fiber-matrix interfacial debonding, and fatigue damage are included as sub-models that operate on the micro scale for the individual composite phases. For the laminate analysis, lamination theory is employed as the global or structural scale model, while GMC is embedded to operate on the meso scale to simulate the behavior of the composite material within each laminate layer. While the analysis approach is quite complex and multifaceted, it is shown, through comparison with experimental data, to be quite accurate and realistic while remaining extremely efficient.Bednarcyk, Brett A. and Arnold, Steven M. and Lerch, Brad A.Glenn Research CenterDAMAGE; DEFORMATION; FAILURE ANALYSIS; LAMINATES; MICROMECHANICS; COMPOSITE MATERIALS; FATIGUE LIFE; SILICON CARBIDES
Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites With an Introduction to Fabric Tensors written by George Voyiadjis and published by Elsevier. This book was released on 2010-07-07 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the principles of Damage Mechanics along with the latest research findings. Both isotropic and anisotropic damage mechanisms are presented. Various damage models are presented coupled with elastic and elasto-plastic behavior. The book includes two chapters that are solely dedicated to experimental investigations conducted by the authors. In its last chapter, the book presents experimental data for damage in composite materials that appear in the literature for the first time. · Systematic treatment of damage mechanics in composite materials · Includes special and advanced topics · Includes basic principles of damage mechanics · Includes new experimental data that appears in print for the first time · Covers both metals and metal matrix composite materials · Includes new chapters on fabric tensors · Second edition includes four new chapters
Download or read book Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: A Generalized Multiscale Analysis Approach brings together comprehensive background information on the multiscale nature of the composite, constituent material behaviour, damage models and key techniques for multiscale modelling, as well as presenting the findings and methods, developed over a lifetime's research, of three leading experts in the field. The unified approach presented in the book for conducting multiscale analysis and design of conventional and smart composite materials is also applicable for structures with complete linear and nonlinear material behavior, with numerous applications provided to illustrate use. Modeling composite behaviour is a key challenge in research and industry; when done efficiently and reliably it can save money, decrease time to market with new innovations and prevent component failure.
Download or read book Inelasticity and Micromechanics of Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2017-05-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains fifteen papers based on the presentations made at the symposium on "Inelasticity and Micromechanics of Metal Matrix Composites" held at the University of Washington, USA, in mid-1994. The papers represent the most recent work conducted on inelasticity and micromechanics of metal matrix composites. The book is divided into two parts: Part I deals with the study of inelastic deformation in metal matrix composites, while Part II tackles the micromechanical aspects of metal matrix composites. The articles discuss different aspects of these two topics ranging from purely theoretical treatments to extensive experimental investigations. Many of the papers are by prominent researchers working in this area.
