Download or read book Temperature Measurement during Millisecond Annealing written by Denise Reichel and published by Springer. This book was released on 2016-01-07 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Denise Reichel studies the delicate subject of temperature measurement during lamp-based annealing of semiconductors, in particular during flash lamp annealing. The approach of background-correction using amplitude-modulated light to obtain the sample reflectivity is reinvented from rapid thermal annealing to apply to millisecond annealing. The author presents a new method independent of the lamp operation to obtain this amplitude modulation and derives a formula to describe the process. Further, she investigates the variables of the formula in depth to validate the method’s suitability for background-corrected temperature measurement. The experimental results finally proof its power for elevated temperatures.
Download or read book Subsecond Annealing of Advanced Materials written by Wolfgang Skorupa and published by Springer Science & Business Media. This book was released on 2013-12-16 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermal processing of materials ranges from few fem to seconds by Swift Heavy Ion Implantation to about one second using advanced Rapid Thermal Annealing. This book offers after an historical excursus selected contributions on fundamental and applied aspects of thermal processing of classical elemental semiconductors and other advanced materials including nanostructures with novel optoelectronic, magnetic, and superconducting properties. Special emphasis is given on the diffusion and segregation of impurity atoms during thermal treatment. A broad range of examples describes the solid phase and/or liquid phase processing of elemental and compound semiconductors, dielectric composites and organic materials.
Download or read book Advanced Gate Stack Source Drain and Channel Engineering for Si Based CMOS 4 New Materials Processes and Equipment written by P. J. Timans and published by The Electrochemical Society. This book was released on 2008-05 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue describes processing, materials and equipment for CMOS front-end integration including gate stack, source/drain and channel engineering. Topics: strained Si/SiGe and Si/SiGe on insulator; high-mobility channels including III-V¿s, etc.; nanowires and carbon nanotubes; high-k dielectrics, metal and FUSI gate electrodes; doping/annealing for ultra-shallow junctions; low-resistivity contacts; advanced deposition (e.g. ALD, CVD, MBE), RTP, UV, plasma and laser-assisted processes.
Download or read book Flash Lamp Annealing written by Lars Rebohle and published by Springer. This book was released on 2019-07-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive survey of the technology of flash lamp annealing (FLA) for thermal processing of semiconductors. It gives a detailed introduction to the FLA technology and its physical background. Advantages, drawbacks and process issues are addressed in detail and allow the reader to properly plan and perform their own thermal processing. Moreover, this books gives a broad overview of the applications of flash lamp annealing, including a comprehensive literature survey. Several case studies of simulated temperature profiles in real material systems give the reader the necessary insight into the underlying physics and simulations. This book is a valuable reference work for both novice and advanced users.
Download or read book Silicon Compatible Materials Processes and Technologies for Advanced Integrated Circuits and Emerging Applications 8 written by F. Roozeboom and published by The Electrochemical Society. This book was released on 2018-05-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 1720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.
Download or read book Radiometric Temperature Measurements written by and published by Academic Press. This book was released on 2009-11-18 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the practice of radiation thermometry, both at a primary level and for a variety of applications, such as in the materials processing industries and remote sensing. This book is written for those who will a) apply radiation thermometry in industrial practice b) use radiation thermometers for scientific research, c) the radiation thermometry specialist in a national measurement institute d) developers of radiation thermometers who are working to innovate products for instrument manufacturers and e) developers non-contact thermometry methods to address challenging thermometry problems. The author(s) of each chapter were chosen from a group of international scientists who are experts in the field and specialist(s) on the subject matter covered in the chapter. A large number of references are included at the end of each chapter as a resource for those seeking a deeper or more detailed understanding. This book is more than a practice guide. Readers will gain in-depth knowledge in: (1) the proper selection of the type of thermometer; (2) the best practice in using the radiation thermometers; (3) awareness of the error sources and subsequent appropriate procedure to reduce the overall uncertainty; and (4) understanding of the calibration chain and its current limitations. Coverage of all fundamental aspects of the radiometric measurements Coverage of practical applications with details on the instrumentation, calibration, and error sources Authors are from the national labs internationally leading in R&D in temperature measurements Comprehensive coverage with large number of references
Download or read book Radiative Properties of Semiconductors written by N.M. Ravindra and published by Morgan & Claypool Publishers. This book was released on 2017-08-21 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical properties, particularly in the infrared range of wavelengths, continue to be of enormous interest to both material scientists and device engineers. The need for the development of standards for data of optical properties in the infrared range of wavelengths is very timely considering the on-going transition of nano-technology from fundamental R&D to manufacturing. Radiative properties play a critical role in the processing, process control and manufacturing of semiconductor materials, devices, circuits and systems. The design and implementation of real-time process control methods in manufacturing requires the knowledge of the radiative properties of materials. Sensors and imagers operate on the basis of the radiative properties of materials. This book reviews the optical properties of various semiconductors in the infrared range of wavelengths. Theoretical and experimental studies of the radiative properties of semiconductors are presented. Previous studies, potential applications and future developments are outlined. In Chapter 1, an introduction to the radiative properties is presented. Examples of instrumentation for measurements of the radiative properties is described in Chapter 2. In Chapters 3-11, case studies of the radiative properties of several semiconductors are elucidated. The modeling and applications of these properties are explained in Chapters 12 and 13, respectively. In Chapter 14, examples of the global infrastructure for these measurements are illustrated.
Download or read book Introduction to Microfabrication written by Sami Franssila and published by John Wiley & Sons. This book was released on 2010-10-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text is now fully revised and updated, providing an overview of fabrication technologies and materials needed to realize modern microdevices. It demonstrates how common microfabrication principles can be applied in different applications, to create devices ranging from nanometer probe tips to meter scale solar cells, and a host of microelectronic, mechanical, optical and fluidic devices in between. Latest developments in wafer engineering, patterning, thin films, surface preparation and bonding are covered. This second edition includes: expanded sections on MEMS and microfluidics related fabrication issues new chapters on polymer and glass microprocessing, as well as serial processing techniques 200 completely new and 200 modified figures more coverage of imprinting techniques, process integration and economics of microfabrication 300 homework exercises including conceptual thinking assignments, order of magnitude estimates, standard calculations, and device design and process analysis problems solutions to homework problems on the complementary website, as well as PDF slides of the figures and tables within the book With clear sections separating basic principles from more advanced material, this is a valuable textbook for senior undergraduate and beginning graduate students wanting to understand the fundamentals of microfabrication. The book also serves as a handy desk reference for practicing electrical engineers, materials scientists, chemists and physicists alike. www.wiley.com/go/Franssila_Micro2e
Download or read book Advanced Gate Stack Source drain and Channel Engineering for Si based CMOS written by and published by . This book was released on 2005 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Short time Thermal Processing for Si based CMOS Devices 2 written by Mehmet C. Öztürk and published by The Electrochemical Society. This book was released on 2004 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical and Diagnostic Techniques for Semiconductor Materials Devices and Processes 7 written by Dieter K. Schroder and published by The Electrochemical Society. This book was released on 2007 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic characterization techniques for semiconductor materials, devices and device processing are addressed at this symposium. It will cover new techniques as well as advances in routine analytical technology applied to semiconductor process development and manufacture. The hardcover edition includes a CD-ROM of ECS Transactions, Volume 10, Issue 1, Analytical Techniques for Semiconductor Materials and Process Characterization 5 (ALTECH 2007). The PDF edition also includes the ALTECH 2007 papers.
Download or read book Semiconductors Dielectrics and Metals for Nanoelectronics 16 written by D. Misra and published by The Electrochemical Society. This book was released on 2018-09-21 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Doping Engineering for Device Fabrication Volume 912 written by B. J. Pawlak and published by . This book was released on 2006-10-11 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from the 2006 MRS Spring Meeting focuses on fundamental materials science and device research for current transistor technologies. Materials scientists come together with silicon technologists and TCAD researchers and activation technologies for integrated circuits, to discuss current achievements research directions.
Download or read book Ion Beams in Materials Processing and Analysis written by Bernd Schmidt and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of ion beam application in modern materials research is provided, including the basics of ion beam physics and technology. The physics of ion-solid interactions for ion implantation, ion beam synthesis, sputtering and nano-patterning is treated in detail. Its applications in materials research, development and analysis, developments of special techniques and interaction mechanisms of ion beams with solid state matter result in the optimization of new material properties, which are discussed thoroughly. Solid-state properties optimization for functional materials such as doped semiconductors and metal layers for nano-electronics, metal alloys, and nano-patterned surfaces is demonstrated. The ion beam is an important tool for both materials processing and analysis. Researchers engaged in solid-state physics and materials research, engineers and technologists in the field of modern functional materials will welcome this text.
Download or read book High Mobility and Quantum Well Transistors written by Geert Hellings and published by Springer Science & Business Media. This book was released on 2013-03-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many decades, the semiconductor industry has miniaturized transistors, delivering increased computing power to consumers at decreased cost. However, mere transistor downsizing does no longer provide the same improvements. One interesting option to further improve transistor characteristics is to use high mobility materials such as germanium and III-V materials. However, transistors have to be redesigned in order to fully benefit from these alternative materials. High Mobility and Quantum Well Transistors: Design and TCAD Simulation investigates planar bulk Germanium pFET technology in chapters 2-4, focusing on both the fabrication of such a technology and on the process and electrical TCAD simulation. Furthermore, this book shows that Quantum Well based transistors can leverage the benefits of these alternative materials, since they confine the charge carriers to the high-mobility material using a heterostructure. The design and fabrication of one particular transistor structure - the SiGe Implant-Free Quantum Well pFET – is discussed. Electrical testing shows remarkable short-channel performance and prototypes are found to be competitive with a state-of-the-art planar strained-silicon technology. High mobility channels, providing high drive current, and heterostructure confinement, providing good short-channel control, make a promising combination for future technology nodes.
