Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Innovation in Production written by Gunter Lay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: How industrial companies in Germany's critically important investment goods sector are deploying new technological and organizational production concepts to adapt to competitiveness challenges, new market requirements, environmental demands, and policy pressures is examined in this book. It draws on the Fraunhofer ISI's unique nationwide survey of technology use and production in Germany. East German as well as West German data is analyzed. Readers will gain fresh insights about the diffusion of new production concepts, the interaction of process and product innovations, and subsequent effects on productivity, employment, work flexibility, and the business performance of German industry. Implications for business strategy, public policy, and ongoing research into technology diffusion are considered.

Download or read book Technology Innovation in Manufacturing written by Davinder Singh and published by CRC Press. This book was released on 2022-12-14 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text identifies and discusses different technology innovation initiatives (TIIs) such as entrepreneurial capability, technology infrastructure capability, organizational culture and climate, and government initiatives. It further evaluates the relationship between various technology innovation initiatives and manufacturing performances using multi-criteria decision-making techniques such as fuzzy set theory (FST), structural equation modeling (SEM), and analytic hierarchy process (AHP). It will serve as an ideal reference text for graduate students and academic researchers in the field of industrial engineering, manufacturing engineering, mechanical engineering, automotive engineering. This book: • Discusses technology innovation initiatives such as entrepreneurial capability, technology infrastructure capability, and organizational culture. • Highlights technology innovation-strategy model in assisting manufacturing industries for enhancing their performance in today’s competitive environment. • Examines the effect of technology innovation initiatives on the performance of manufacturing industries. • Covers multi-criteria decision-making techniques such as fuzzy set theory, structural equation modeling, and analytic hierarchy process. • Explores the validation of fuzzy-based technology innovation model through structural equation modeling.

Download or read book Technosophy Strategic Approaches to the Assessment and Management of Manufacturing Technology Innovation written by P. Levy and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the genuine proceedings of the NATO Advanced Research Workshop on the Strategic Approaches to the Assessment and Management of Manufacturing Technology Innovation, Bled, Slovenia, June 3-5, 1997. The word 'genuine' is used as the content of this book has arisen from ideas and reflections which arose during and after the workshop itself. It contains no pre-prepared papers or articles. The workshop was designed to create a forum for dialogue and debate. The essence of that debate is contained here. We acknowledge the support of NATO in making this possible. Because of the peculiar nature of these proceedings, we acknowledge all workshop participants as co-authors of different parts of the book and we pay tribute to them all. The proceedings have taken a while to prepare, as the reflection process has been long and varied! 1 Technosophy: Strategic Approaches to the Assessment and Management of Manufacturing Technology Innovation Paul Levy Mihael Junkar Location: Bled, Slovenia Date: June 3-5 1997 A 3-day workshop "Though our smoke may hide the Heavens from your eyes, It will vanish and the stars will shine again, Because, for all our power and weight and size, We are nothing more than children of your brain. " Rudyard Kipling 1. Introduction This is not a long book.

Download or read book Low tech Innovation written by Oliver Som and published by Springer. This book was released on 2014-10-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the economic relevance of the so-called low-tech industries and firms. Non R&D intensive firms continue to be the economic backbone of several developed industrial countries. They form the core of National Innovation Systems and contribute significantly to growth and employment. However, due to their lack of R&D activity, they are easily overlooked in the general innovation debate. This book provides latest empirical findings on the current economic relevance and specific innovation strategies and management of non-R&D intensive firms in Germany. It discusses their future role in a knowledge driven economy as well as possible implications for innovation and technology policy. An outcome of several years of dedicated research conducted at the Fraunhofer Institute for Systems and Innovation Research (ISI), this book will prove of immense value to researchers and policy makers dealing with innovation and knowledge strategy.

Download or read book Innovation and Sustainable Manufacturing written by Carolina Machado and published by Elsevier. This book was released on 2022-09-29 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Sustainable Manufacturing: Research and Development addresses the manufacturing sustainability challenge from different points of view, drawing on research from different disciplines to shed light on the latest green technologies, green product design methods, and materials. Addressing the needs of practitioners as well as academics, this book examines a range of important themes such as environmental impacts and how to assess them, how to set boundary conditions to include or exclude downstream supply chains, how to improve sustainability without sacrificing productivity, the cost benefits of sustainability, and how to trace impacts in manufacturing. By providing a thorough review of global research in this field, Innovation and Sustainable Manufacturing acts as an ideal entry point into this discipline for researchers, and a guide to the latest developments for forward-thinking practitioners. - Covers how different stages of the manufacturing supply chain can impact on sustainability - Combines research from a variety of disciplines to provide a comprehensive coverage of this complex subject - Explores the relationship between sustainability and other goals such as productivity, quality, and profitability

Download or read book Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies written by Craig Leadley and published by Woodhead Publishing. This book was released on 2015-11-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies focuses on emerging and future trends in food manufacturing and supply chain technologies, examining the drivers of change and innovation in the food industry and the current and future ways of addressing issues such as energy reduction and rising costs in food manufacture. Part One looks at innovation in the food supply chain, while Part Two covers emerging technologies in food processing and packaging. Subsequent sections explore innovative food preservation technologies in themed chapters and sustainability and future research needs in food manufacturing. - Addresses issues such as energy reduction and rising costs in food manufacture - Assesses current supply chain technologies and the emerging advancements in the field, including key chapters on food processing technologies - Covers the complete food manufacturing scale, compiling significant research from academics and important industrial figures

Download or read book The Management of Productivity and Technology in Manufacturing written by Paul R. Kleindorfer and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the nature of new manufacturing technologies, such as CAD/CAM and robotics, as well as ap propriate methodologies for evaluating whether such technologies are financially and organizationally viable in particular contexts. The chapters included here were commissioned as papers for presen tation at The Wharton Conference on Productivity, Technology, and Organizational Innovation, which took place in Philadelphia on December 8 and 9 of 1983. The conference was sponsored by The University of Pennsylvania's Center for the Study of Organizational Innovation. There has been a surge of interest in the area of manufacturing over the past ten years as managers have come to realize that the operations function is critical to remaining competitive. New status has been given to factory and operations managers. New programs revitalizing manufacturing and distribution have been introduced in organizations. Corporate strategy is now explicitly considering operations and manufacturing functions. And the curricula of leading business schools are reflecting the rapidly advancing research on technology management and manufacturing operations. In spite of these important signs of progress, we are clearly just at the beginning of understanding the issues involved here. The present volume provides a state-of-the-art review of the realities of technology management and manufacturing strategy. As described in the Editor's Introduction, we address four topics: The Nature of New Manufacturing Technology, Innovation and Manufacturing Strategy, Productivity Management, and Technology Management and Organ ization. These issues are clearly very important themes for U.S.

Download or read book Challenges for Technology Innovation An Agenda for the Future written by Fernando Moreira da Silva and published by CRC Press. This book was released on 2017-04-21 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is undergoing a profound transformation, driven by radical technological changes and an accelerated globalisation process. A new culture of greater resource efficiency and disruptive innovation will require new technologies, processes and materials, fostering new knowledge, innovation, education and a digital society, bringing forward new business opportunities and novel solutions to major societal challenges. Challenges for Technology Innovation: an Agenda for the Future is the result of the 1st International Conference on Sustainable Smart Manufacturing – S2M, held at the Faculty of Architecture in Lisbon, Portugal, on October 20-22, 2016. It contains innovative contributions in the field of Sustainable Smart Manufacturing and related topics, making a significant contribution to further development of these fields. This volume covers a wide range of topics including Design and Digital Manufacturing, Design Education, Eco Design and Innovation, Future Cities, Medicine 4.0, Smart Manufacturing, Sustainable Business Models, Sustainable Construction, Sustainable Design and Technology and Sustainable Recycling.

Download or read book Global Manufacturing And Secondary Innovation In China Latecomer s Advantages written by Xiaobo Wu and published by World Scientific. This book was released on 2020-12-17 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation studies have long been confined to the theoretical system established by the scholars of developed countries in the West. It is difficult to use these studies to understand the real nature and law of technological innovation in developing countries. This book, in an innovative manner, studies the theoretical system of secondary innovation, and reveals the evolution law and dynamic innovation mode of the activities carried out by technologically backward countries. It does so by laying an important foundation for the development of management science theory on the basis of the standpoint and characteristics of developing countries.

Download or read book Technology and Global Industry written by Harvey Brooks and published by National Academies Press. This book was released on 1987-02-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing Technological Innovation written by Donald D. Davis and published by Jossey-Bass. This book was released on 1986-08-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brings together works by scholars in organization theory and experts in the implementation of manufacturing innovation to examine how American industry can overcome individual and organizational obstacles to technological innovation. Uses the results of empirical studies, case histories, and extensive interviews with managers in a wide range of industries to identify the issues managers face when adopting such technologies as computer-aided design and robotics.

Download or read book Low Cost Low Tech Innovation written by Vijay Vyas and published by Routledge. This book was released on 2014-11-13 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like much of SMEs research, innovation studies of small enterprises have commenced later and are less numerous. The focus of such studies remains high-technology enterprises, which continue to attract both academic and popular interest, oblivious to the innovative endeavours of people in traditional low-tech industries. This book attempts to address this imbalance through a comprehensive analysis of innovation in this largely neglected area. Based on case studies of seven small innovative food companies, this book presents an in-depth analysis of innovation in the Scottish food and drinks industry and unravels a lesser-known approach to effective low-cost product innovation, which is simple and economical, yet elegant and successful. Using careful data collection and rigorous statistical testing, the analysis and findings in this book address a wide spectrum of interests: academics in business schools, policy makers in governments and executives and entrepreneurs in food and other low-technology sectors.

Download or read book Revisiting the Manufacturing USA Institutes written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-06-29 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manufacturing USA initiative seeks to reinforce U.S.-based advanced manufacturing through partnerships among industry, academia, and government. Started in 2012 and established with bipartisan support by the Revitalize American Manufacturing and Innovation Act of 2014, the initiative envisages a nationwide network of research centers for manufacturing innovation. Some 14 manufacturing innovation institutes have been established to facilitate the movement of early-stage research into proven capabilities ready for adoption by U.S. manufacturers. To better understand the role and experiences of the Manufacturing USA institutes, a committee of the National Academies of Sciences, Engineering, and Medicine convened a workshop on May 23, 2017 drawing together institute directors and manufacturing policy experts along with leaders from industry, academia, and government. Given the continued prominence of enhancing domestic manufacturing and international competitiveness in public policy discussions, the National Academies convened a second workshop on November 14, 2018, to monitor the progress of the Manufacturing USA institutes. This publication summarizes the presentations and discussions from this second workshop.

Download or read book Making in America written by Suzanne Berger and published by MIT Press. This book was released on 2013-08-23 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: How America can rebuild its industrial landscape to sustain an innovative economy. America is the world leader in innovation, but many of the innovative ideas that are hatched in American start-ups, labs, and companies end up going abroad to reach commercial scale. Apple, the superstar of innovation, locates its production in China (yet still reaps most of its profits in the United States). When innovation does not find the capital, skills, and expertise it needs to come to market in the United States, what does it mean for economic growth and job creation? Inspired by the MIT Made in America project of the 1980s, Making in America brings experts from across MIT to focus on a critical problem for the country. MIT scientists, engineers, social scientists, and management experts visited more than 250 firms in the United States, Germany, and China. In companies across America—from big defense contractors to small machine shops and new technology start-ups—these experts tried to learn how we can rebuild the industrial landscape to sustain an innovative economy. At each stop, they asked this basic question: “When you have a new idea, how do you get it into the market?” They found gaping holes and missing pieces in the industrial ecosystem. Even in an Internet-connected world, proximity to innovation and users matters for industry. Making in America describes ways to strengthen this connection, including public-private collaborations, new government-initiated manufacturing innovation institutes, and industry/community college projects. If we can learn from these ongoing experiments in linking innovation to production, American manufacturing could have a renaissance.

Download or read book 3D Manufacturing Innovation written by Hiroshi Toriya and published by Springer Science & Business Media. This book was released on 2008-01-14 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a company to survive in the manufacturing industry, it must not only accumulate light-weight 3D data, but also share this information within the company and with related companies as well as train key personnel. 3D Manufacturing Innovation introduces the best practices developed by Toyota, Sony, Nikon, Casio and other pioneers in the global engineering scene, providing the reader with invaluable tips for manufacturing innovation.

Download or read book Challenges for Technology Innovation An Agenda for the Future written by Fernando Moreira da Silva and published by CRC Press. This book was released on 2017-04-21 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is undergoing a profound transformation, driven by radical technological changes and an accelerated globalisation process. A new culture of greater resource efficiency and disruptive innovation will require new technologies, processes and materials, fostering new knowledge, innovation, education and a digital society, bringing forward new business opportunities and novel solutions to major societal challenges. Challenges for Technology Innovation: an Agenda for the Future is the result of the 1st International Conference on Sustainable Smart Manufacturing – S2M, held at the Faculty of Architecture in Lisbon, Portugal, on October 20-22, 2016. It contains innovative contributions in the field of Sustainable Smart Manufacturing and related topics, making a significant contribution to further development of these fields. This volume covers a wide range of topics including Design and Digital Manufacturing, Design Education, Eco Design and Innovation, Future Cities, Medicine 4.0, Smart Manufacturing, Sustainable Business Models, Sustainable Construction, Sustainable Design and Technology and Sustainable Recycling.