Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2023-12-05 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Innovation in Production written by Gunter Lay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: How industrial companies in Germany's critically important investment goods sector are deploying new technological and organizational production concepts to adapt to competitiveness challenges, new market requirements, environmental demands, and policy pressures is examined in this book. It draws on the Fraunhofer ISI's unique nationwide survey of technology use and production in Germany. East German as well as West German data is analyzed. Readers will gain fresh insights about the diffusion of new production concepts, the interaction of process and product innovations, and subsequent effects on productivity, employment, work flexibility, and the business performance of German industry. Implications for business strategy, public policy, and ongoing research into technology diffusion are considered.

Download or read book Sustainability and Innovation in Manufacturing Enterprises written by Anca Draghici and published by Springer Nature. This book was released on 2022-01-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book informs and educates readers about sustainable development management, approaches and applications in manufacturing processes and presents the trends to the next economic and social paradigm: the Industry 5.0 and Society 5.0. Educational aspects, case studies from various companies, together with the analysis and synthesis of the literature and empirical experiences, define the content of the eleven chapters. Thus, this material could be considered as a starting point and foundation for researchers and practitioners interested in the present state and the evolution of the manufacturing systems. The book offers various points of view regarding the actual digital transformation of the manufacturing system.

Download or read book Making in America written by Suzanne Berger and published by MIT Press. This book was released on 2015-08-21 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: How America can rebuild its industrial landscape to sustain an innovative economy. America is the world leader in innovation, but many of the innovative ideas that are hatched in American start-ups, labs, and companies end up going abroad to reach commercial scale. Apple, the superstar of innovation, locates its production in China (yet still reaps most of its profits in the United States). When innovation does not find the capital, skills, and expertise it needs to come to market in the United States, what does it mean for economic growth and job creation? Inspired by the MIT Made in America project of the 1980s, Making in America brings experts from across MIT to focus on a critical problem for the country. MIT scientists, engineers, social scientists, and management experts visited more than 250 firms in the United States, Germany, and China. In companies across America—from big defense contractors to small machine shops and new technology start-ups—these experts tried to learn how we can rebuild the industrial landscape to sustain an innovative economy. At each stop, they asked this basic question: “When you have a new idea, how do you get it into the market?” They found gaping holes and missing pieces in the industrial ecosystem. Even in an Internet-connected world, proximity to innovation and users matters for industry. Making in America describes ways to strengthen this connection, including public-private collaborations, new government-initiated manufacturing innovation institutes, and industry/community college projects. If we can learn from these ongoing experiments in linking innovation to production, American manufacturing could have a renaissance.

Download or read book Production in the Innovation Economy written by Richard M. Locke and published by MIT Press. This book was released on 2014-01-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports from an ambitious MIT research project that makes the case for encouraging the colocation of manufacturing and innovation. Production in the Innovation Economy emerges from several years of interdisciplinary research at MIT on the links between manufacturing and innovation in the United States and the world economy. Authors from political science, economics, business, employment and operations research, aeronautics and astronautics, and nuclear engineering come together to explore the extent to which manufacturing is key to an innovative and vibrant economy. Chapters include survey research on gaps in worker skill development and training; discussions of coproduction with Chinese firms and participation in complex manufacturing projects in China; analyses of constraints facing American start-up firms involved in manufacturing; proposals for a future of distributed manufacturing and a focus on product variety as a marker of innovation; and forecasts of powerful advanced manufacturing technologies on the horizon. The chapters show that although the global distribution of manufacturing is not an automatic loss for the United States, gains from the colocation of manufacturing and innovation have not disappeared. The book emphasizes public policy that encourages colocation through, for example, training programs, supplements to private capital, and interfirm cooperation in industry consortia. Such approaches can help the United States not only to maintain manufacturing capacity but also, crucially, to maximize its innovative potential. Contributors Joyce Lawrence, Richard K. Lester, Richard M. Locke, Florian Metzler, Jonas Nahm, Paul Osterman, Elisabeth B. Reynolds, Donald B. Rosenfeld, Hiram M. Samel, Sanjay E. Sarma, Edward S. Steinfeld, Andrew Weaver, Rachel L. Wellhausen, Olivier de Weck

Download or read book 3D Manufacturing Innovation written by Hiroshi Toriya and published by Springer Science & Business Media. This book was released on 2008-01-14 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a company to survive in the manufacturing industry, it must not only accumulate light-weight 3D data, but also share this information within the company and with related companies as well as train key personnel. 3D Manufacturing Innovation introduces the best practices developed by Toyota, Sony, Nikon, Casio and other pioneers in the global engineering scene, providing the reader with invaluable tips for manufacturing innovation.

Download or read book Technology Innovation in Manufacturing written by Davinder Singh and published by CRC Press. This book was released on 2022-12-14 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text identifies and discusses different technology innovation initiatives (TIIs) such as entrepreneurial capability, technology infrastructure capability, organizational culture and climate, and government initiatives. It further evaluates the relationship between various technology innovation initiatives and manufacturing performances using multi-criteria decision-making techniques such as fuzzy set theory (FST), structural equation modeling (SEM), and analytic hierarchy process (AHP). It will serve as an ideal reference text for graduate students and academic researchers in the field of industrial engineering, manufacturing engineering, mechanical engineering, automotive engineering. This book: • Discusses technology innovation initiatives such as entrepreneurial capability, technology infrastructure capability, and organizational culture. • Highlights technology innovation-strategy model in assisting manufacturing industries for enhancing their performance in today’s competitive environment. • Examines the effect of technology innovation initiatives on the performance of manufacturing industries. • Covers multi-criteria decision-making techniques such as fuzzy set theory, structural equation modeling, and analytic hierarchy process. • Explores the validation of fuzzy-based technology innovation model through structural equation modeling.

Download or read book Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies written by Craig Leadley and published by Woodhead Publishing. This book was released on 2015-11-18 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies focuses on emerging and future trends in food manufacturing and supply chain technologies, examining the drivers of change and innovation in the food industry and the current and future ways of addressing issues such as energy reduction and rising costs in food manufacture. Part One looks at innovation in the food supply chain, while Part Two covers emerging technologies in food processing and packaging. Subsequent sections explore innovative food preservation technologies in themed chapters and sustainability and future research needs in food manufacturing. Addresses issues such as energy reduction and rising costs in food manufacture Assesses current supply chain technologies and the emerging advancements in the field, including key chapters on food processing technologies Covers the complete food manufacturing scale, compiling significant research from academics and important industrial figures

Download or read book Low tech Innovation written by Oliver Som and published by Springer. This book was released on 2014-10-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the economic relevance of the so-called low-tech industries and firms. Non R&D intensive firms continue to be the economic backbone of several developed industrial countries. They form the core of National Innovation Systems and contribute significantly to growth and employment. However, due to their lack of R&D activity, they are easily overlooked in the general innovation debate. This book provides latest empirical findings on the current economic relevance and specific innovation strategies and management of non-R&D intensive firms in Germany. It discusses their future role in a knowledge driven economy as well as possible implications for innovation and technology policy. An outcome of several years of dedicated research conducted at the Fraunhofer Institute for Systems and Innovation Research (ISI), this book will prove of immense value to researchers and policy makers dealing with innovation and knowledge strategy.

Download or read book Global Manufacturing And Secondary Innovation In China Latecomer s Advantages written by Xiaobo Wu and published by World Scientific. This book was released on 2020-12-17 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation studies have long been confined to the theoretical system established by the scholars of developed countries in the West. It is difficult to use these studies to understand the real nature and law of technological innovation in developing countries. This book, in an innovative manner, studies the theoretical system of secondary innovation, and reveals the evolution law and dynamic innovation mode of the activities carried out by technologically backward countries. It does so by laying an important foundation for the development of management science theory on the basis of the standpoint and characteristics of developing countries.

Download or read book Technosophy Strategic Approaches to the Assessment and Management of Manufacturing Technology Innovation written by P. Levy and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the genuine proceedings of the NATO Advanced Research Workshop on the Strategic Approaches to the Assessment and Management of Manufacturing Technology Innovation, Bled, Slovenia, June 3-5, 1997. The word 'genuine' is used as the content of this book has arisen from ideas and reflections which arose during and after the workshop itself. It contains no pre-prepared papers or articles. The workshop was designed to create a forum for dialogue and debate. The essence of that debate is contained here. We acknowledge the support of NATO in making this possible. Because of the peculiar nature of these proceedings, we acknowledge all workshop participants as co-authors of different parts of the book and we pay tribute to them all. The proceedings have taken a while to prepare, as the reflection process has been long and varied! 1 Technosophy: Strategic Approaches to the Assessment and Management of Manufacturing Technology Innovation Paul Levy Mihael Junkar Location: Bled, Slovenia Date: June 3-5 1997 A 3-day workshop "Though our smoke may hide the Heavens from your eyes, It will vanish and the stars will shine again, Because, for all our power and weight and size, We are nothing more than children of your brain. " Rudyard Kipling 1. Introduction This is not a long book.

Download or read book Making Value for America written by National Academy of Engineering and published by National Academies Press. This book was released on 2015-02-27 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Globalization, developments in technology, and new business models are transforming the way products and services are conceived, designed, made, and distributed in the U.S. and around the world. These forces present challenges - lower wages and fewer jobs for a growing fraction of middle-class workers - as well as opportunities for "makers" and aspiring entrepreneurs to create entirely new types of businesses and jobs. Making Value for America examines these challenges and opportunities and offers recommendations for collaborative actions between government, industry, and education institutions to help ensure that the U.S. thrives amid global economic changes and remains a leading environment for innovation. Filled with real-life examples, Making Value for America presents a roadmap to enhance the nation's capacity to pursue opportunities and adapt to transforming value chains by widespread adoption of best practices, a well-prepared and innovative workforce, local innovation networks to support startups and new products, improved flow of capital investments, and infrastructure upgrades.

Download or read book Low Cost Low Tech Innovation written by Vijay Vyas and published by Routledge. This book was released on 2014-11-13 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like much of SMEs research, innovation studies of small enterprises have commenced later and are less numerous. The focus of such studies remains high-technology enterprises, which continue to attract both academic and popular interest, oblivious to the innovative endeavours of people in traditional low-tech industries. This book attempts to address this imbalance through a comprehensive analysis of innovation in this largely neglected area. Based on case studies of seven small innovative food companies, this book presents an in-depth analysis of innovation in the Scottish food and drinks industry and unravels a lesser-known approach to effective low-cost product innovation, which is simple and economical, yet elegant and successful. Using careful data collection and rigorous statistical testing, the analysis and findings in this book address a wide spectrum of interests: academics in business schools, policy makers in governments and executives and entrepreneurs in food and other low-technology sectors.

Download or read book The Management of Productivity and Technology in Manufacturing written by Paul R. Kleindorfer and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the nature of new manufacturing technologies, such as CAD/CAM and robotics, as well as ap propriate methodologies for evaluating whether such technologies are financially and organizationally viable in particular contexts. The chapters included here were commissioned as papers for presen tation at The Wharton Conference on Productivity, Technology, and Organizational Innovation, which took place in Philadelphia on December 8 and 9 of 1983. The conference was sponsored by The University of Pennsylvania's Center for the Study of Organizational Innovation. There has been a surge of interest in the area of manufacturing over the past ten years as managers have come to realize that the operations function is critical to remaining competitive. New status has been given to factory and operations managers. New programs revitalizing manufacturing and distribution have been introduced in organizations. Corporate strategy is now explicitly considering operations and manufacturing functions. And the curricula of leading business schools are reflecting the rapidly advancing research on technology management and manufacturing operations. In spite of these important signs of progress, we are clearly just at the beginning of understanding the issues involved here. The present volume provides a state-of-the-art review of the realities of technology management and manufacturing strategy. As described in the Editor's Introduction, we address four topics: The Nature of New Manufacturing Technology, Innovation and Manufacturing Strategy, Productivity Management, and Technology Management and Organ ization. These issues are clearly very important themes for U.S.

Download or read book Revisiting the Manufacturing USA Institutes written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-06-29 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manufacturing USA initiative seeks to reinforce U.S.-based advanced manufacturing through partnerships among industry, academia, and government. Started in 2012 and established with bipartisan support by the Revitalize American Manufacturing and Innovation Act of 2014, the initiative envisages a nationwide network of research centers for manufacturing innovation. Some 14 manufacturing innovation institutes have been established to facilitate the movement of early-stage research into proven capabilities ready for adoption by U.S. manufacturers. To better understand the role and experiences of the Manufacturing USA institutes, a committee of the National Academies of Sciences, Engineering, and Medicine convened a workshop on May 23, 2017 drawing together institute directors and manufacturing policy experts along with leaders from industry, academia, and government. Given the continued prominence of enhancing domestic manufacturing and international competitiveness in public policy discussions, the National Academies convened a second workshop on November 14, 2018, to monitor the progress of the Manufacturing USA institutes. This publication summarizes the presentations and discussions from this second workshop.

Download or read book Innovation in the Asia Pacific written by Thomas Clarke and published by Springer. This book was released on 2017-10-20 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book promotes the creation of advanced knowledge-based economies driven by innovation networks and the continuous development of human capital and capability. It provides valuable insights into the growing emergence of knowledge-based industries of the Asia Pacific, and highlights research on: modes of creativity and innovation; intellectual property; the components of national innovation systems such as firms, education and training; knowledge and technical infrastructure; and public policy. The Asia Pacific region is currently in the process of transforming from being the manufacturing centre of the global economy to a centre of innovation for the knowledge economy, with the successful IPO of Alibaba in 2014 being a prime example of this shift. From a neo-Schumpeterian perspective, the region is increasingly engaged in shortening and intensifying cycles of innovation. The historic agreement at the Beijing APEC meeting between China and the US to radically reduce carbon emissions indicates that one imperative of this innovation is to contribute to sustainability. The fact that the US Government is moving away from this historic commitment, while the Chinese Government is endorsing the commitment, indicates an emerging opportunity for Asia to lead the world technologically in a vital industrial sector of the future.

Download or read book Technology and Global Industry written by Harvey Brooks and published by National Academies Press. This book was released on 1987-02-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: