Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Mechanical Engineering Technologies and Applications written by Zied Driss and published by Bentham Science Publishers. This book was released on 2021-11-09 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold’s number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Technologies of Mechanical Engineering Industry written by Shishir Kumar Sahu and published by Trans Tech Publications Ltd. This book was released on 2013-09-03 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013), July 13-14, 2013, Jakarta, Indonesia. The 130 papers are grouped as follows: Chapter 1: Advanced Materials Engineering and Technologies; Chapter 2: General Mechanical Engineering; Chapter 3: Mechanical Design Technology and Modern Design Technologies; Chapter 4: Heat Engineering and Emission Control in Automotive Industry; Chapter 5: Electrical Engineering and Electric Machines; Chapter 6: Power System and Energy Engineering; Chapter 7: Electronics and Integrated Circuits, Embedded Technology and Applications; Chapter 8: Manufacturing and Industrial Engineering, Management Applications; Chapter 9: Modern Control and Automation; Chapter 10: Monitoring, Detection, Measurement Technologies; Chapter 11: Communication Systems and Engineering; Chapter 12: Signal Processing and Data Mining; Chapter 13: Information Technologies and Networks.
Download or read book Wave Technology in Mechanical Engineering written by R. F. Ganiev and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking volume covers the significant advantages of wave technologies in the development of innovative machine building where high technologies with appreciable economic effect are applied. These technologies cover many industries, including the oil-and-gas industry, refining and other chemical processing, petrochemical industry, production of new materials, composite and nano-composites including, construction equipment, environmental protection, pharmacology, power generation, and many others. The technological problem of grinding, fine-scale grinding and activation of solid particles (dry blends) is disclosed. This task is common for the production of new materials across these various industries. At present in this sphere the traditional methods have reached their limits and in some cases are economically ineffective from both scientific and practical points of view. The authors have detailed, through their extensive groundbreaking research, how these new methods, based on wave technology, can be used to create new, more efficient and less expensive applications and materials for industry. From increasing oil recovery to building stronger machines more efficiently and creating more productive membrane separation devices, wave technology can be used as a fertile ground for product innovation and more efficient methods of production across a variety of industries. This book is the only one of its kind in the world and offers a unique and invaluable glance into this sophisticated and complicated scientific area that is only now being more fully utilized for its valuable benefits.
Download or read book Innovations in Mechanical Engineering written by José Machado and published by Springer Nature. This book was released on 2021-06-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 1st International Conference “Innovation in Engineering”, ICIE, held in Guimarães, Portugal, on June 28–30, 2021, it focuses on innovation in mechanical engineering, spanning from engineering design and testing of medical devices, evaluation of new materials and composites for different industrial applications, fatigue and stress analysis of mechanical structures, and application of new tools such as 3D printing, CAE 3D models, and decision support systems. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.
Download or read book Integrated Computer Technologies in Mechanical Engineering 2020 written by Mykola Nechyporuk and published by Springer Nature. This book was released on 2021-01-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses conference topics such as information technology in the design and manufacture of engines; information technology in the creation of rocket space systems; aerospace engineering; transport systems and logistics; big data and data science; nano-modeling; artificial intelligence and smart systems; networks and communication; cyber-physical systems and IoE; and software engineering and IT infrastructure. The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was formed to bring together outstanding researchers and practitioners in the field of information technology, and whose work involves the design and manufacture of engines, creation of rocket space systems, and aerospace engineering, from all over the world to share their experiences and expertise. It was established by the National Aerospace University “Kharkiv Aviation Institute.” The ICTM’2020 conference was held in Kharkiv, Ukraine on October 28–30, 2020.
Download or read book Advances in Manufacturing II written by Bartosz Gapiński and published by Springer. This book was released on 2019-05-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics related to machine manufacturing and concerning machine design, product assembly, technological aspects of production, mechatronics and production maintenance. Based on papers presented at the 6th International Scientific-Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19-22, 2019, the different chapters reports on cutting-edge issues in constructing machine parts, mechatronic solutions and modern drives. They include new ideas and technologies for machine cutting and precise processing. Chipless technologies, such as founding, plastic forming, non-metal construction materials and composites, and additive techniques alike, are also analyzed and thoroughly discussed. All in all, the book reports on significant scientific contributions in modern manufacturing, offering a timely guide for researchers and professionals developing and/or using mechanical engineering technologies that have become indispensable for modern manufacturing.
Download or read book Manufacturing and Industrial Engineering written by Pankaj Agarwal and published by CRC Press. This book was released on 2021-07-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in manufacturing and industrial engineering in terms of advanced and latest technologies are required nowadays to attend the accelerated demands of high quality, productivity, and sustainability simultaneously. This book fulfils the requirement by offering unique comprehensive chapters on advances in manufacturing and industrial engineering technologies with an emphasis on Industry 4.0. This book sheds light on advances in the field of manufacturing and industrial engineering for enhancement in productivity, quality, and sustainability. It comprehensively covers the recent developments, latest trends, research, and innovations being carried out. 3D printing, green manufacturing, computer integrated manufacturing, cloud manufacturing, intelligent condition monitoring, advanced forming, automation, supply chain optimization, and advanced manufacturing of composites are covered in this book. Industry 4.0 based technologies for mechanical and industrial engineering are also presented with both a theoretical and a practical focus. This book is written for students, researchers, professors, and engineers working in the fields of manufacturing, industrial, materials science, and mechanical engineering.
Download or read book Group Technology in the Engineering Industry written by John L. Birbidge and published by . This book was released on 1979 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Technologies in Mechanical Engineering written by Dmitry Chinakhov and published by Trans Tech Publications Ltd. This book was released on 2018-10-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special issue contains research papers on modern technologies for obtaining and processing materials, technologies for obtaining welded joints and additive technologies. The book is intended for a wide range of specialists engaged in the development and production of heavy-duty metal structures, as well as for students, undergraduates, graduate and postgraduate students of technical colleges and universities.
Download or read book Mechanical Engineering Technologies and Applications written by ZIED. DRISS and published by . This book was released on 2021-11-09 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold's number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Innovations in Industrial Engineering written by José Machado and published by Springer Nature. This book was released on 2021-06-23 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of industrial engineering, with a special focus on research and industrial applications aimed at both improving quality of processes and products and contributing to a sustainable economy. Based on a set of papers presented at the 1st International Conference “Innovation in Engineering”, ICIE, held in Guimarães, Portugal, on June 28–30, 2021, it focuses on innovative technologies associated with and strategies for the development of Industry 4.0. The chapters discuss new ways to improve industrial production and supply chain management by applying mathematical and computational methods. They also cover important issues relating to sustainability, education, and collaborations between industry and universities, and national developments. This book, which belongs to a three-volume set, provides engineering researchers and professionals with a timely overview and extensive information on trends and technologies behind the current and future developments of Industry 4.0.
Download or read book Recent Advances in Mechanical Engineering written by Mohammad Muzammil and published by Springer Nature. This book was released on 2020-12-28 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed papers presented at the International Conference on Innovative Technologies in Mechanical Engineering (ITME) 2019. The book discusses a wide range of topics in mechanical engineering such as mechanical systems, materials engineering, micro-machining, renewable energy, systems engineering, thermal engineering, additive manufacturing, automotive technologies, rapid prototyping, computer aided design and manufacturing. This book, in addition to assisting students and researchers working in various areas of mechanical engineering, can also be useful to researchers and professionals working in various allied and interdisciplinary fields.
Download or read book Mechanical Engineering Industrial Electronics and Information Technology Applications in Industry written by B.L. Liu and published by Trans Tech Publications Ltd. This book was released on 2013-09-27 with total page 3094 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Mechanical Engineering, Industrial Electronics and Informatization (MEIEI 2013), September 14-15, 2013, Chongqing, China. The 656 papers are grouped as follows: Chapter 1: Applied Mechanics and Advances in Mechanical Engineering; Chapter 2: Industrial Electronics, Measurements, Automation and Control Technology; Chapter 3: Signal and Data Processing, Data Mining, Applied and Computational Mathematics; Chapter 4: Information Technology Applications in Industry and Engineering.
Download or read book Manufacturing Technologies for Machines of the Future written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date view of manufacturing technologies. Written by leading experts from the USA, Europe, and Asia, both handbook and CD-ROM cover a wide range of topics ranging from industrial management and organization to automation and control, from mechanical to electronical technology, and from machine tools to the consumer goods industry. It gives a unique interdisciplinary and global presentation of material and combines, for the first time, theoretical and significant practical results from the last decades of the most important branches of machine building. Its broad coverage appeals to the highly skilled scientific expert as well as the experienced design engineer, and to undergraduate and advanced students.
Download or read book Advanced Research on Mechanical Engineering Industry and Manufacturing Engineering written by and published by . This book was released on 2011 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection of peer-reviewed papers are to be found many original ideas and new angles on all aspects of Mechanical, Industrial and Manufacturing Engineering. The work is divided into: Chapter 1: Mechanical Engineering, Design and Materials Science, Chapter 2: Materials Engineering, Industry and Manufacturing Engineering, Chapter 3: Intelligent Materials, Information Engineering and Energy Engineering, Chapter 4: Design Science, Materials and Mechanical Manufacturing Technology. A comprehensive and very current guide to the subject matter. Review from Book News Inc.: Over 200 peer-reviewed and selected papers cover mechanical engineering, design, and materials science; material engineering, industry, and manufacturing engineering; intelligent materials, information engineering, and energy engineering; and design science, materials, and mechanical manufacturing technology. Among specific topics are push-based sequence authorization mechanisms for grid security, the transmitting efficiency of supercharged devices, the blind signal separation of strong reverberation based on a new algorithm, applying compliant mechanisms on a polishing robot, a method of software static testing in the presence of runtime exception, and a new controller of stochastic delay systems. The two volumes are paged and indexed together. (Annotation ©2011 Book News Inc. Portland, OR).
Download or read book Participation and Technological Change in the Mechanical Engineering Industry written by Robin Williams and published by Improvement of Living and Working Conditions. This book was released on 1991 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
