Download or read book Thermal Energy Storage Technologies for Sustainability written by S. Kalaiselvam and published by Elsevier. This book was released on 2014-07-30 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Energy Storage Technologies for Sustainability is a broad-based overview describing the state-of-the-art in latent, sensible, and thermo-chemical energy storage systems and their applications across industries. Beginning with a discussion of the efficiency and conservation advantages of balancing energy demand with production, the book goes on to describe current state-of-the art technologies. Not stopping with description, the authors also discuss design, modeling, and simulation of representative systems, and end with several case studies of systems in use. - Describes how thermal energy storage helps bridge the gap between energy demand and supply, particularly for intermittent power sources like solar, wind, and tidal systems - Provides tables, illustrations, and comparative case studies that show applications of TES systems across industries - Includes a chapter on the rapidly developing field of viable nanotechnology-based thermal energy storage systems
Download or read book Energy Storage written by Alfred Rufer and published by CRC Press. This book was released on 2017-10-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide the technical community with an overview of the development of new solutions and products that address key topics, including electric/hybrid vehicles, ultrafast battery charging, smart grids, renewable energy (e.g., solar and wind), peak shaving, and reduction of energy consumption. The needs for storage discussed are within the context of changes between the centralized power generation of today and the distributed utility of tomorrow, including the integration of renewable energy sources. Throughout the book, methods for quantitative and qualitative comparison of energy storage means are presented through their energy capacity as well as through their power capability for different applications. The definitions and symbols for energy density and power density are given and relate to the volume and weight of a given system or component. A relatively underdeveloped concept that is crucial to this text is known as the theory of Ragone plots. This theory makes possible the evaluation of the real amount of energy that can possibly release out of a given system, with respect to the level of power dependency chosen for the discharge process. From systems using electrochemical transformations, to classical battery energy storage elements and so-called flow batteries, to fuel cells and hydrogen storage, this book further investigates storage systems based on physical principles (e.g., gravitational potential forces, air compression, and rotational kinetic energy). This text also examines purely electrical systems such as superconductive magnets and capacitors. Another subject of analysis is the presentation of power electronic circuits and architectures that are needed for continuously controllable power flow to and from different storage means. For all systems described, the elementary principles of operation are given as well as the relationships for the quantified storage of energy. Finally, Energy Storage: Systems and Components contains multiple international case studies and a rich set of exercises that serve both students and practicing engineers.
Download or read book Energy Storage and Transportation Prospects for New Technologies written by G. Beghi and published by Taylor & Francis. This book was released on 1981-01-31 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the ISPRA Course held at Ispra, Italy, October 22-26, 1979
Download or read book Energy Systems written by Renaud Gicquel and published by CRC Press. This book was released on 2012-01-27 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered as particularly difficult by generations of students and engineers, thermodynamics applied to energy systems can now be taught with an original instruction method. Energy Systems applies a completely different approach to the calculation, application and theory of multiple energy conversion technologies. It aims to create the reader’s foundation for understanding and applying the design principles to all kinds of energy cycles, including renewable energy. Proven to be simpler and more reflective than existing methods, it deals with energy system modeling, instead of the thermodynamic foundations, as the primary objective. Although its style is drastically different from other textbooks, no concession is done to coverage: with encouraging pace, the complete range from basic thermodynamics to the most advanced energy systems is addressed. The accompanying ThermoptimTM portal (http://direns.mines-paristech.fr/Sites/Thopt/en/co/_Arborescence_web.html) presents the software and manuals (in English and French) to solve over 200 examples, and programming and design tools for exercises of all levels of complexity. The reader is explained how to build appropriate models to bridge the technological reality with the theoretical basis of energy engineering. Offering quick overviews through e-learning modules moreover, the portal is user-friendly and enables to quickly become fully operational. Students can freely download the ThermoptimTM modeling software demo version (in seven languages) and extended options are available to lecturers. A professional edition is also available and has been adopted by many companies and research institutes worldwide - www.thermoptim.org This volume is intended as for courses in applied thermodynamics, energy systems, energy conversion, thermal engineering to senior undergraduate and graduate-level students in mechanical, energy, chemical and petroleum engineering. Students should already have taken a first year course in thermodynamics. The refreshing approach and exceptionally rich coverage make it a great reference tool for researchers and professionals also. Contains International Units (SI).
Download or read book Micro et nanosyst mes autonomes en nergie des applications aux fonctions et technologies Trait EGEM s rie lectronique et micro lectronique written by BELLEVILLE Marc and published by Lavoisier. This book was released on 2012-07-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cet ouvrage propose un panorama détaillé des micro et nanosystèmes autonomes en énergie, couvrant à la fois les principes mis en oeuvre et les derniers développements. Une étude approfondie d'applications dans les domaines aéronautiques, médicaux et du contrôle des bâtiments permet de dresser les grandes spécifications de tels systèmes et de leurs sous-composants. Les techniques les plus récentes de récupération et conversion d'énergie d'origine photovoltaïque, thermique et mécanique sont présentées. Un état de l'art sur les interfaces capteurs, le traitement du signal numérique et les liaisons radiofréquence, ultra-basse consommation, complète ce panorama. Enfin, des techniques d'optimisation de l'énergie au niveau du microsystème/noeud de capteur et d'un réseau de capteurs sont introduites et discutées.
Download or read book Energy Efficiency in Industry written by J. Sirchis and published by CRC Press. This book was released on 2003-09-02 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a workshop organized by the Commission of the European Communities, Directorate-General for Energy, Berlin, Germany, 19-20 October 1987.
Download or read book Advanced Technologies for Future Transmission Grids written by Gianluigi Migliavacca and published by Springer Science & Business Media. This book was released on 2012-12-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: The re-engineering of power transmission systems is crucial to meeting the objectives of such regulators as the European Union. In addition to its market, organisational and regulatory aspects, this re-engineering will also involve technical issues dealing with the progressive integration of innovative transmission technologies in the daily operation of transmission system operators. In this context, Advanced Technologies for Future Transmission Grids provides an overview of the most promising technologies, likely to be of help to planners of transmission grids in responding to the challenges of the future: security of supply; integration of renewable generation; and creation of integrated energy markets (using the European case as an example). These issues have increased importance because of administrative complication and the fragmentation of public opinion expressed on the build up of new infrastructure. For each technology discussed, the focus is on the technical-economic perspective rather than on purely technological points of view. A transmission-system-operator-targeted Technology Roadmap is presented for the integration of promising innovative power transmission technologies within power systems of the mid-long term. Although the primary focus of this text is in the sphere of the European energy market, the lessons learned can be generalized to the energy markets of other regions.
Download or read book Advances in Energy Storage written by Andreas Hauer and published by John Wiley & Sons. This book was released on 2022-03-28 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: ADVANCES IN ENERGY STORAGE An accessible reference describing the newest advancements in energy storage technologies Advances in Energy Storage: Latest Developments from R&D to the Market is a comprehensive exploration of a wide range of energy storage technologies that use the fundamental energy conversion method. The distinguished contributors discuss the foundational principles, common materials, construction, device operation, and system level performance of the technology, as well as real-world applications. The book also includes examinations of the industry standards that apply to energy storage technologies and the commercial status of various kinds of energy storage. The book has been written by accomplished leaders in the field and address electrochemical, chemical, thermal, mechanical, and superconducting magnetic energy storage. They offer insightful treatments of relevant policy instruments and posit likely future advancements that will support and stimulate energy storage. Advances in Energy Storage also includes: A thorough introduction to electrochemical, electrical, and super magnetic energy storage, including foundational electrochemistry concepts used in modern power sources A comprehensive exploration of mechanical energy storage and pumped hydro energy storage Practical discussions of compressed air energy storage and flywheels, including the geology, history, and development of air energy storage In-depth examinations of thermal energy storage, including new material developments for latent and thermochemical heat storage Perfect for practicing electrical engineers, mechanical engineers, and materials scientists, Advances in Energy Storage: Latest Developments from R&D to the Market is also an indispensable reference for researchers and graduate students in these fields.
Download or read book A Thermochemical Heat Storage System for Households written by Armand Fopah Lele and published by Springer. This book was released on 2016-07-09 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a comprehensive report on the design and optimization of a thermochemical heat storage system for use in buildings. It combines theoretical and experimental work, with a special emphasis on model-based methods. It describes the numerical modeling of the heat exchanger, which allows recovery of about two thirds of the waste heat from both solar and thermal energy. The book also provides readers with a snapshot of current research on thermochemical storage systems, and an in-depth review of the most important concepts and methods in thermal management modeling. It represents a valuable resource for students, engineers and researchers interested in thermal energy storage processes, as well as for those dealing with modeling and 3D simulations in the field of energy and process engineering.
Download or read book Development of Marine Resources written by Patrick Prouzet and published by John Wiley & Sons. This book was released on 2014-12-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine resources and their exploitation, recovery and economic networks they generate are here from the perspective now inevitable growing environmental constraints, policy management and technical innovation. A historical perspective shows that Ocean and its adjacent seas at all times, allowed coastal communities to adapt to a very volatile environment through many technological changes. The recent development of marine biotechnology , the discovery of a great pharmacopoeia especially in reef environments , the development of marine renewables , are examples which show that man can develop through these new technologies property and services of the ocean. But this development resources under pressure of global change requires not only taking into account technical, but also social and political. This is the price that the analysis of maritime activities will assess the sustainability and development of various economic sectors and coastal populations, faced with the objectives of a "blue growth" associated with a return to the "good state "of the marine environment.
Download or read book Energy in the Development of New Caledonia written by Yves le Bars and published by IRD Editions. This book was released on 2010 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dans un contexte de raréfaction des ressources en énergie fossile et de changements climatiques, la Nouvelle-Calédonie, qui n’est pas actuellement soumise au protocole de Kyoto, doit répondre aux préoccupations environnementales et trouver les voies et moyens d’une moins grande dépendance énergétique. Au moment où le Territoire définit son Schéma d’aménagement et de développement 2025 et, dans le prolongement, son Schéma de l’énergie et du climat, le gouvernement de la Nouvelle-Calédonie et l’ADEME, via le Comité territorial pour la maîtrise de l’énergie (CTME), ont demandé à l’Institut de recherche pour le développement (IRD) de produire un état des lieux complet et une analyse pluridisciplinaire des enjeux constitutifs de la question de l’énergie dans le développement de la Nouvelle-Calédonie. La maîtrise de l’énergie, les nouvelles technologies en matière de production et de stockage d’énergie, les moyens de réduction des émissions de gaz à effet de serre, la géopolitique de l’énergie et du climat et la coopération régionale, la gouvernance de l’énergie et du climat en Nouvelle-Calédonie, ont ainsi été examinés au cours de l’année 2009 par un collège d’experts qui en restitue ici le bilan détaillé. Cette expertise collégiale, qui a mobilisé l’ensemble des données scientifiques disponibles pour les décliner sur le cas particulier de la Nouvelle-Calédonie, livre une série de recommandations qui pourront utilement venir à l’appui des politiques que le Territoire est sur le point de se donner.
Download or read book Springer Handbook of Power Systems written by Konstantin O. Papailiou and published by Springer Nature. This book was released on 2021-04-12 with total page 1283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive source for electrical power professionals. It covers all elementary topics related to the design, development, operation and management of power systems, and provides an insight from worldwide key players in the electrical power systems industry. Edited by a renowned leader and expert in Power Systems, the book highlights international professionals’ longstanding experiences and addresses the requirements of practitioners but also of newcomers in this field in finding a solution for their problems. The structure of the book follows the physical structure of the power system from the fundamentals through components and equipment to the overall system. In addition the handbook covers certain horizontal matters, for example "Energy fundamentals", "High voltage engineering", and "High current and contact technology" and thus intends to become the major one-stop reference for all issues related to the electrical power system.
Download or read book Electrochemical Components written by Marie-Cécile Pera and published by John Wiley & Sons. This book was released on 2013-08-02 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the methods of storage commonly used in hybrid systems. After an introductory chapter reviewing the basics of electrochemistry, Chapter 2 is given over to the storage of electricity in the form of hydrogen. Once hydrogen has been made, we have to be able to convert it back into electricity on demand. This can be done with another energy converter: a fuel cell, the subject of Chapter 3. Such a system is unable to deliver significant dynamics in terms of storage and release of electricity and needs to be supplemented with another solution: a detailed study of supercapacitors is provided in Chapter 4.While the storage systems touched upon in the previous three chapters (hydrogen batteries and supercapacitors) both exhibit advantageous characteristics, at present they are still relatively costly. Thus, the days of the electrochemical accumulator by no means appear to be numbered just yet. This will therefore be the topic of Chapter 5. Finally, on the basis of the elements laid down in the previous chapters, Chapter 6 will focus on electrical hybridization of these storage systems, with a view to enhancing the performance (in terms of energy, lifetime, cost, etc.) of the newly formed system. Aimed at an audience of researchers, industrialists, academics, teachers and students, many exercises, along with corrected solutions, are provided throughout the book. Contents 1. Basic Concepts of Electrochemistry used in Electrical Engineering. 2. Water Electrolyzers. 3. Fuel Cells. 4. Electrical Energy Storage by Supercapacitors. 5. Electrochemical Accumulators. 6. Hybrid Electrical System. About the Authors Marie-Cécile Péra is a Full Professor at the University of Franche-Comte in France and Deputy Director of the FEMTO-ST Institute (CNRS). Her research activities include modeling, control and diagnosis of electric power generation systems (fuel cells – PEMFC and SOFC, supercapacities, batteries) for transportation and stationary applications. She has contributed to more than 180 articles in international journals and conferences. Daniel Hissel is Full Professor at the University of Franche-Comte in France and Director of the Fuel Cell Lab Research Federation (CNRS). He also leads a research team devoted to hybrid electrical systems in the FEMTO-ST Institute (CNRS). He has published more than 250 research papers on modeling, control, diagnostics and prognostics of hybrid electrical systems. Hamid Gualous is Full Professor at the University of Caen Lower Normandy in France and director of the LUSAC laboratory. His current research interests include power electronics, electric energy storage, power and energy systems and energy management. Christophe Turpin is Full Researcher at the CNRS (French National Center for Scientific Research). He is responsible for hydrogen activities within the Laboratory LAPLACE, Toulouse, France. His research activities include the characterization and modeling of fuel cells and electrolyzers, the state of health of these components, and their hybridization with other electrochemical components (ultracapacitors, batteries) within optimized energy systems for stationary and aeronautical applications.
Download or read book Vector Control of Induction Machines written by Benoît Robyns and published by Springer Science & Business Media. This book was released on 2012-02-06 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, Vector Control of Induction Machines introduces the standard mathematical models for induction machines – whichever rotor technology is used – as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. Vector Control of Induction Machines suggests a unique approach aimed at reducing parameter sensitivity for vector controls based on a theoretical analysis of this sensitivity. This analysis naturally leads to the introduction of control strategies that are based on the combination of different controls with different robustness properties, through the use of fuzzy logic supervisors. Numerous applications and experiments confirm the validity of this simple solution, which is both reproducible and applicable to other complex systems. Vector Control of Induction Machines is written for researchers and postgraduate students in electrical engineering and motor drive design.
Download or read book Polygeneration with Polystorage written by Kaveh Rajab Khalilpour and published by Academic Press. This book was released on 2018-11-27 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polygeneration with Polystorage: For Energy and Chemicals addresses the problem of both traditional and dispersed generation with a broad, multidisciplinary perspective. As the first book to thoroughly focus on the topic of polygeneration, users will find the problem presented from different scientific and technical domains down to both macro and micro levels. Detailed analyses and state-of-the-art developments in specific fields are included, focusing on storage in conventional energy supply chains and demand-side renewable polygeneration systems, management advice and the necessary market mechanisms needed to support them. This reference is useful for academics and professionals in conventional and unconventional energy systems. - Includes an outlined framework towards polygeneration and polystorage down to both micro and macro levels - Contains fluid and continuous chapters that provide detailed analysis and a review of the state-of-the-art developments in specific fields - Addresses the wider global view of research advancement and potential in the role of polygeneration and polystorage in the move toward sustainability
Download or read book New Energy Conservation Technologies and Their Commercialization written by John P. Millhone and published by . This book was released on 1981 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
