Download or read book How to Write Technical Reports written by Lutz Hering and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical Reports are usually written according to general standards, corporate - sign standards of the current university or company, logical rules and practical - periences. These rules are not known well enough among engineers. There are many books that give general advice in writing. This book is specialised in how to write Technical Reports and addresses not only engineers, but also natural sci- th tists, computer scientists, etc. It is based on the 6 edition published in 2008 by st Vieweg in German and is now published as 1 edition by Springer in English. Both authors of the German edition have long experience in educating en- neers at the University of Applied Sciences Hannover. They have held many l- tures where students had to write reports and took notes about all positive and negative examples that occurred in design reports, lab work reports, and in theses. Prof. Dr. Lutz Hering has worked for VOLKSWAGEN and DAIMLER and then changed to the University of Applied Sciences Hannover where he worked from 1974 until 2000. He held lectures on Technical Drawing, Construction and Design, CAD and Materials Science. Dr. Heike Hering worked nine years as a Technical Writer and was responsible for many CAD manuals in German and English. She is now employed at TÜV NORD Akademie, where she is responsible for E-Learning projects, technical documentation and software training and supervises students who are writing their theses. Prof. Dr. -Ing.
Download or read book Technical Report Writing and Style Guide written by Tony Atherton and published by . This book was released on 2020-09-08 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on, and expanded from, a course on technical report writing that the author has presented for over 20 years. Are you an engineer who writes technical reports as part of your job, yet you wish you could make them shorter and better - and write them faster? Maybe you write external reports for your consultancy's clients, or internal reports for senior managers. Maybe sometimes you think you signed up to be an engineer not a writer. But now you are a writer as well as an engineer and you wish that writing a good report was easier. This book will show you how to write shorter and better reports, and write them faster. The author is a retired chartered engineer and who has written about 100 articles and four books - published by Kogan Page, Macmillan and San Francisco Press. Here is just one comment from one client who arranged for the course on which this book is based to be presented to his staff: 'Thank you for the course. All the feedback I've had so far has been very positive... which is quite unusual as they can be a cynical bunch.' Well, not so much as cynical as don't like 'airy-fairy' ideas. The book is down-to-earth with practical ideas.You will learn: - How to break the task into three phases: planning, writing and editing.- How to avoid the biggest complaint about technical reports.- How to use three layers of sequencing to make the writing easier.- The most common format for technical reports - and three others. - How much detail to include.- Twelve big tips to improve the writing and several smaller tips.- How to satisfy both technical and non-technical readers.- How to cut the waffle.- How to edit your own work, which is never an easy thing to do.- Seventeen consistency checks to look for when editing.- How to get the best from the Microsoft grammar checker.- How to use the readability statistics.- Variations between British and US English.PLUS: A style guide with over 130 items of guidance, including all the punctuation marks. Did you know that the hyphen has been described as the punctuation mark to drive you mad?
Download or read book Technical Report Writing Today written by Daniel Riordan and published by Cengage Learning. This book was released on 2013-01-03 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: TECHNICAL REPORT WRITING TODAY provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and Focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples--more than 100 in all--illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resumes and documenting electronic sources and Ethics and Globalization sidebars that highlight these two important topics in the technical communication field. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Technical Writing written by Phillip A. Laplante and published by CRC Press. This book was released on 2018-07-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical Writing: A Practical Guide for Engineers, Scientists, and Nontechnical Professionals, Second Edition enables readers to write, edit, and publish materials of a technical nature, including books, articles, reports, and electronic media. Written by a renowned engineer and widely published technical author, this guide complements traditional writer’s reference manuals on technical writing through presentation of first-hand examples that help readers understand practical considerations in writing and producing technical content. These examples illustrate how a publication originates as well as various challenges and solutions. The second edition contains new material in every chapter including new topics, additional examples, insights, tips and tricks, new vignettes and more exercises. Appendices have been added for writing checklists and writing samples. The references and glossary have been updated and expanded. In addition, a focus on writing for the nontechnical persons working in the technology world and the nonnative English speaker has been incorporated. Written in an informal, conversational style, unlike traditional college writing texts, the book also contains many interesting vignettes and personal stories to add interest to otherwise stodgy lessons.
Download or read book Expansion Joints in Buildings written by National Research Council and published by National Academies Press. This book was released on 1974-02-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.
Download or read book N2O and CH4 Emission from Wastewater Collection and Treatment Systems written by Jeff Foley and published by IWA Publishing. This book was released on 2015-05-15 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world where there is a growing awareness of the possible effects of human activities on climate change, there is a need to identify the emission of greenhouse gases (GHG) from wastewater treatment plants (WWTPs). As a result of this growing awareness, governments started to implement regulations that require water authorities to report their GHG emissions. With these developments there exists a strong need for adequate insight into the emissions of N2O and CH4. With this insight water authorities would be able to estimate and finally reduce their emissions. The overall objectives of the different research programs performed by partners of the GWRC members WERF (United States of America), WSAA (Australia), CIRSEE-Suez (France) and STOWA (the Netherlands) were: To define the origin of N2O emission. To understand the formation processes of N2O. To identify the level of CH4 emissions from wastewater collection and treatment systems. To evaluate the use of generic emission factors to estimate the emission of N2O from individual plants
Download or read book Technical Report written by Aeronautical Research Council (Great Britain) and published by . This book was released on 1928 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes its Reports, which are also issued separately.
Download or read book Technical Report written by Cold Regions Research and Engineering Laboratory (U.S.) and published by . This book was released on 1976 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Technical Reports written by Henry Dan Piper and published by . This book was released on 1958 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Music Description and Access written by Jean Harden and published by A-R Editions, Inc.. This book was released on 2018-01-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Music Description and Access: Solving the Puzzle of Cataloging is both a textbook for students and a handbook and reference source for practicing catalogers. The bulk of the book is a step-by-step guide to cataloging music materials, with dozens of examples showing images of published scores or audio recordings. Content and encoding are treated separately, using RDA and MARC21. Interspersed in the chapters on practical cataloging are short Historical Asides, essays putting particular devices or conventions into context. These essays supplement a chapter on cataloging history, which follows an introductory chapter that sets the stage for the task at hand. The book ends with a chapter by Maristella Feustle on describing and providing access to music special collections, using both archival and rare-music-cataloging standards. Aids in navigating the book include an index plus multiple lists and tables. A bibliography and a list of cataloging tools that are available online are also given.
Download or read book The IEEE Guide to Writing in the Engineering and Technical Fields written by David Kmiec and published by John Wiley & Sons. This book was released on 2017-09-25 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps both engineers and students improve their writing skills by learning to analyze target audience, tone, and purpose in order to effectively write technical documents This book introduces students and practicing engineers to all the components of writing in the workplace. It teaches readers how considerations of audience and purpose govern the structure of their documents within particular work settings. The IEEE Guide to Writing in the Engineering and Technical Fields is broken up into two sections: “Writing in Engineering Organizations” and “What Can You Do With Writing?” The first section helps readers approach their writing in a logical and persuasive way as well as analyze their purpose for writing. The second section demonstrates how to distinguish rhetorical situations and the generic forms to inform, train, persuade, and collaborate. The emergence of the global workplace has brought with it an increasingly important role for effective technical communication. Engineers more often need to work in cross-functional teams with people in different disciplines, in different countries, and in different parts of the world. Engineers must know how to communicate in a rapidly evolving global environment, as both practitioners of global English and developers of technical documents. Effective communication is critical in these settings. The IEEE Guide to Writing in the Engineering and Technical Fields Addresses the increasing demand for technical writing courses geared toward engineers Allows readers to perfect their writing skills in order to present knowledge and ideas to clients, government, and general public Covers topics most important to the working engineer, and includes sample documents Includes a companion website that offers engineering documents based on real projects The IEEE Guide to Engineering Communication is a handbook developed specifically for engineers and engineering students. Using an argumentation framework, the handbook presents information about forms of engineering communication in a clear and accessible format. This book introduces both forms that are characteristic of the engineering workplace and principles of logic and rhetoric that underlie these forms. As a result, students and practicing engineers can improve their writing in any situation they encounter, because they can use these principles to analyze audience, purpose, tone, and form.
Download or read book Technical Report Writing written by Rufus P. Turner and published by . This book was released on 1971 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Report written by and published by . This book was released on with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Writing for Engineers written by Joan van Emden and published by Bloomsbury Publishing. This book was released on 2017-10-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is full of practical advice and useful examples to help students and engineers write clearly, accurately and impressively. This updated fourth edition features new material on technical notes, inspection reports and business cases, along with abstracts and summaries. It is an essential aid for today's engineers.
Download or read book Characterization of Porous Solids written by H. Kral and published by Elsevier. This book was released on 1988-04-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of porosity has long been recognized by scientists and engineers. Porous solids are widely encountered in industry and everyday life and their behaviour, e.g. chemical reactivity, adsorptive capacity, and catalytic activity is dependent on their pore structure. A considerable amount of work on porous solids has been undertaken both in academic and in industrial laboratories. However, all this activity is in urgent need of a critical appraisal. To undertake this task, a number of leading experts in the field of adsorption, porosimetry, X-ray and neutron scattering, optical and electron microscopy, calorimetry and fluid permeation, were brought together at the 1987 IUPAC (COPS I) Symposium. This proceedings volume provides an up-to-date overall review of the theoretical foundations for modelling and characterizing porous systems. It deals with most of the techniques in current use as applied to both model systems and porous solids of industrial importance. The reader will find the description and discussion of a number of novel techniques as well as a critical appraisal and comparison of the more established methods. All those concerned with the characterization of porous solids in academic and industrial laboratories will find much to interest them in this volume. It should be on the bookshelf of applied research centres involved in adsorption, catalysis, purification of gases and liquids, pigments, fillers, building materials, etc.
Download or read book Technical Reports written by Miami Conservancy District (Ohio) and published by . This book was released on 1917 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Technical Report Writing written by Paul M. Zall and published by . This book was released on 1962 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
