Download or read book TECHNICAL REPORT 1 SPARK IGNITION ENGINE SIMULATION MODELS written by C. BORGNAKKE, P. PUZINAUSKAS, Y. XIAO and published by . This book was released on 1986 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spark Ignition Engine Modeling and Control System Design written by Amir-Mohammad Shamekhi and published by CRC Press. This book was released on 2023-02-22 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step guide to the engine control system design, providing case studies and a thorough analysis of the modeling process using machine learning, and model predictive control (MPC). Covering advanced processes alongside the theoretical foundation, MPC enables engineers to improve performance in both hybrid and non-hybrid vehicles. Control system improvement is one of the major priorities for engineers seeking to enhance an engine. Often possible on a low budget, substantial improvements can be made by applying cutting-edge methods, such as artificial intelligence when modeling engine control system designs and using MPC. This book presents approaches to control system improvement at mid, low, and high levels of control. Beginning with the model-in-the-loop hierarchical control design of ported fuel injection SI engines, this book focuses on optimal control of both transient and steady state and also discusses hardware-in-the-loop. The chapter on low-level control discusses adaptive MPC and adaptive variable functioning, as well as designing a fuel injection feed-forward controller. At mid-level control, engine calibration maps are discussed, with consideration of constraints such as limits on pollutant emissions. Finally, the high-level control methodology is discussed in detail in relation to transient torque control of SI engines. This comprehensive yet clear guide to control system improvement is an essential read for any engineer working in automotive engineering and engine control system design.
Download or read book Modelling Spark Ignition Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book 1D and Multi D Modeling Techniques for IC Engine Simulation written by Angelo Onorati and published by SAE International. This book was released on 2020-04-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D and Multi-D Modeling Techniques for IC Engine Simulation provides a description of the most significant and recent achievements in the field of 1D engine simulation models and coupled 1D-3D modeling techniques, including 0D combustion models, quasi-3D methods and some 3D model applications.
Download or read book Internal Combustion Engines written by Allan T. Kirkpatrick and published by John Wiley & Sons. This book was released on 2020-11-23 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource covering the foundational thermal-fluid sciences and engineering analysis techniques used to design and develop internal combustion engines Internal Combustion Engines: Applied Thermosciences, Fourth Edition combines foundational thermal-fluid sciences with engineering analysis techniques for modeling and predicting the performance of internal combustion engines. This new 4th edition includes brand new material on: New engine technologies and concepts Effects of engine speed on performance and emissions Fluid mechanics of intake and exhaust flow in engines Turbocharger and supercharger performance analysis Chemical kinetic modeling, reaction mechanisms, and emissions Advanced combustion processes including low temperature combustion Piston, ring and journal bearing friction analysis The 4th Edition expands on the combined analytical and numerical approaches used successfully in previous editions. Students and engineers are provided with several new tools for applying the fundamental principles of thermodynamics, fluid mechanics, and heat transfer to internal combustion engines. Each chapter includes MATLAB programs and examples showing how to perform detailed engineering computations. The chapters also have an increased number of homework problems with which the reader can gauge their progress and retention. All the software is ‘open source’ so that readers can see in detail how computational analysis and the design of engines is performed. A companion website is also provided, offering access to the MATLAB computer programs.
Download or read book Advanced Combustion Technologies for Low Carbon Emissions written by Jun Li and published by Frontiers Media SA. This book was released on 2023-07-10 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1981 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Modeling and Simulation written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-16 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1979 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.
Download or read book Computer Simulation Of Spark Ignition Engine Processes written by V. Ganesan and published by Universities Press. This book was released on 1996 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the theory and computer programs for the simulation of spark ignition (SI) engine processes. It starts with the fundamental concepts and goes on to the advanced level and can thus be used by undergraduates, postgraduates and Ph. D. scholars.
Download or read book Spark Ignition Engine Simulation Models written by Claus Borgnakke and published by . This book was released on 1986 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2nd Conference on Engine Processes written by Sens, Marc and published by Universitätsverlag der TU Berlin. This book was released on 2015-10-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the combustion engine looks set to remain the dominant energy conversion unit in vehicle powertrains in the medium term, either in combination with electrical components or on its own, attention will need to be paid to continue improving its efficiency in the future. The high development depth of today's combustion engines means that it is becoming increasingly difficult to achieve significant efficiency improvements by simple means. On the search for these improvements, the focus has shifted to inner-engine processes, for instance charge cycles including the charging system, the mixture formation including injection, combustion and kinematic conversion of the energy within the fuel. Our 2nd conference 'Engine processes' aims to offer all developers a platform to discuss the latest technological developments in the field of inner-engine process control, and encourage new paths to be taken. We believe that the program for this conference is a sound foundation for this endeavour. Da der Verbrennungsmotor auch mittelfristig die dominierende Energiewandlungseinheit im Antriebsstrang von Kraftfahrzeugen sein wird, entweder im Verbund mit elektrischen Komponenten oder aber als alleiniger Antrieb, muss der Verbesserung von dessen Wirkungsgrad auch in Zukunft erhebliche Aufmerksamkeit zu Teil werden. Aufgrund der hohen Entwicklungstiefe, die heutige Verbrennungsmotoren aufweisen, wird es immer schwerer, deutliche Wirkungsgradverbesserungen auf einfachem Weg zu erreichen. Auf der Suche nach diesen Verbesserungen rücken die innermotorischen Prozesse immer mehr in den Fokus, hierzu zählen der Ladungswechsel inkl. Aufladesystem, die Gemischbildung inkl. Einspritzung, die Verbrennung sowie die kinematische Wandlung der im Kraftstoff gebundenen Energie. Unsere 2. Tagung „Motorische Prozesse“ soll nun allen Entwicklern als Austauschforum zu neuesten technologischen Entwicklungen auf dem Gebiet der innermotorischen Prozessführung dienen und dazu anregen neue Wege zu beschreiten. Wir sind überzeugt, mit dem vorliegenden Tagungs-Programm hierzu einen sehr guten Beitrag leisten zu können.
Download or read book Emission Control and Fuel Economy written by John H Johnson and published by SAE International. This book was released on 2005-06-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.
Download or read book Numerical and Experimental Studies on Combustion Engines and Vehicles written by Paweł Woś and published by BoD – Books on Demand. This book was released on 2020-11-26 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The matters discussed and presented in the chapters of this book cover a wide spectrum of topics and research methods commonly used in the field of engine combustion technology and vehicle functional systems. This book contains the results of both computational analyses and experimental studies on jet and reciprocating combustion engines as well heavy-duty onroad vehicles. Special attention is devoted to research and measures toward preventing the emission of harmful exhaust components, reducing fuel consumption or using unconventional methods of engine fueling or using renewable and alternative fuels in different applications. Some technical improvements in design and control of vehicle systems are also presented.
Download or read book Unsteady Convective Heat Transfer Modeling and Application to Internal Combustion Engines written by Pin Zeng and published by . This book was released on 2004 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
