Download or read book T S fuzzy model based adaptive cruise control for longitudinal car following considering vehicle lateral stability written by Changzhu Zhang and published by OAE Publishing Inc.. This book was released on 2023-11-07 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive cruise control is one of the essential technologies of advanced driver assistance systems, which is used to maintain a safe distance between an ego vehicle and a preceding vehicle and has been extensively applied in the automotive industry and control community. Note that some vehicle manoeuvres may approach handling limits to prevent collisions under complex road conditions, which often leads to vehicle lateral instability while cruising. In this study, a T-S fuzzy model predictive control framework is applied to the problem of adaptive cruise control. Variations in the preceding vehicle velocity and road surface conditions are considered to formulate adaptive cruise control as a tracking control problem of a T-S fuzzy system subject to parameter uncertainties and external persistent perturbations. Then, a robust positively invariant set is introduced to derive an admissible T-S fuzzy controller by solving a min-max optimization problem under a series of linear matrix inequality constraints. Finally, a CarSim/MATLAB joint simulation is conducted to illustrate the effectiveness of the proposed method, which ensures longitudinal adaptive cruise control for a car-following scenario with lateral vehicle stability.
Download or read book Vehicle Dynamics written by Dieter Schramm and published by Springer. This book was released on 2014-07-17 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors examine in detail the fundamentals and mathematical descriptions of the dynamics of automobiles. In this context different levels of complexity will be presented, starting with basic single-track models up to complex three-dimensional multi-body models. A particular focus is on the process of establishing mathematical models on the basis of real cars and the validation of simulation results. The methods presented are explained in detail by means of selected application scenarios.
Download or read book Type 2 Fuzzy Logic and Systems written by Robert John and published by Springer. This book was released on 2018-02-07 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores recent perspectives on type-2 fuzzy sets. Written as a tribute to Professor Jerry Mendel for his pioneering works on type-2 fuzzy sets and systems, it covers a wide range of topics, including applications to the Go game, machine learning and pattern recognition, as well as type-2 fuzzy control and intelligent systems. The book is intended as a reference guide for the type-2 fuzzy logic community, yet it aims also at other communities dealing with similar methods and applications.
Download or read book Autonomous Ground Vehicles written by Ümit Özgüner and published by Artech House. This book was released on 2011 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the near future, we will witness vehicles with the ability to provide drivers with several advanced safety and performance assistance features. Autonomous technology in ground vehicles will afford us capabilities like intersection collision warning, lane change warning, backup parking, parallel parking aids, and bus precision parking. Providing you with a practical understanding of this technology area, this innovative resource focuses on basic autonomous control and feedback for stopping and steering ground vehicles.Covering sensors, estimation, and sensor fusion to percept the vehicle motion and surrounding objects, this unique book explains the key aspects that makes autonomous vehicle behavior possible. Moreover, you find detailed examples of fusion and Kalman filtering. From maps, path planning, and obstacle avoidance scenarios...to cooperative mobility among autonomous vehicles, vehicle-to-vehicle communication, and vehicle-to-infrastructure communication, this forward-looking book presents the most critical topics in the field today.
Download or read book Nonlinear and Adaptive Control written by Alan S.I. Zinober and published by Springer Science & Business Media. This book was released on 2002-09-12 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the EU Nonlinear Control Network Workshop was to bring together scientists who are already active in nonlinear control and young researchers working in this field. This book presents selectively invited contributions from the workshop, some describing state-of-the-art subjects that already have a status of maturity while others propose promising future directions in nonlinear control. Amongst others, following topics of nonlinear and adaptive control are included: adaptive and robust control, applications in physical systems, distributed parameter systems, disturbance attenuation, dynamic feedback, optimal control, sliding mode control, and tracking and motion planning.
Download or read book Traffic and Granular Flow 07 written by Cécile Appert-Rolland and published by Springer Science & Business Media. This book was released on 2009-05-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers several research fields dealing with transport. This work covers three main topics including road traffic, granular matter, and biological transport. It considers different points of views including modelling, simulations, experiments, and phenomenological observations.
Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.
Download or read book Traffic Flow Dynamics written by Martin Treiber and published by Springer Science & Business Media. This book was released on 2012-10-11 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive and instructive coverage of vehicular traffic flow dynamics and modeling. It makes this fascinating interdisciplinary topic, which to date was only documented in parts by specialized monographs, accessible to a broad readership. Numerous figures and problems with solutions help the reader to quickly understand and practice the presented concepts. This book is targeted at students of physics and traffic engineering and, more generally, also at students and professionals in computer science, mathematics, and interdisciplinary topics. It also offers material for project work in programming and simulation at college and university level. The main part, after presenting different categories of traffic data, is devoted to a mathematical description of the dynamics of traffic flow, covering macroscopic models which describe traffic in terms of density, as well as microscopic many-particle models in which each particle corresponds to a vehicle and its driver. Focus chapters on traffic instabilities and model calibration/validation present these topics in a novel and systematic way. Finally, the theoretical framework is shown at work in selected applications such as traffic-state and travel-time estimation, intelligent transportation systems, traffic operations management, and a detailed physics-based model for fuel consumption and emissions.
Download or read book Automotive Mechatronics Operational and Practical Issues written by B. T. Fijalkowski and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents operational and practical issues of automotive mechatronics with special emphasis on the heterogeneous automotive vehicle systems approach, and is intended as a graduate text as well as a reference for scientists and engineers involved in the design of automotive mechatronic control systems. As the complexity of automotive vehicles increases, so does the dearth of high competence, multi-disciplined automotive scientists and engineers. This book provides a discussion into the type of mechatronic control systems found in modern vehicles and the skills required by automotive scientists and engineers working in this environment. Divided into two volumes and five parts, Automotive Mechatronics aims at improving automotive mechatronics education and emphasises the training of students’ experimental hands-on abilities, stimulating and promoting experience among high education institutes and produce more automotive mechatronics and automation engineers. The main subject that are treated are: VOLUME I: RBW or XBW unibody or chassis-motion mechatronic control hypersystems; DBW AWD propulsion mechatronic control systems; BBW AWB dispulsion mechatronic control systems; VOLUME II: SBW AWS diversion mechatronic control systems; ABW AWA suspension mechatronic control systems. This volume was developed for undergraduate and postgraduate students as well as for professionals involved in all disciplines related to the design or research and development of automotive vehicle dynamics, powertrains, brakes, steering, and shock absorbers (dampers). Basic knowledge of college mathematics, college physics, and knowledge of the functionality of automotive vehicle basic propulsion, dispulsion, conversion and suspension systems is required.
Download or read book Computer Vision for Driver Assistance written by Mahdi Rezaei and published by Springer. This book was released on 2017-02-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarises the state of the art in computer vision-based driver and road monitoring, focussing on monocular vision technology in particular, with the aim to address challenges of driver assistance and autonomous driving systems. While the systems designed for the assistance of drivers of on-road vehicles are currently converging to the design of autonomous vehicles, the research presented here focuses on scenarios where a driver is still assumed to pay attention to the traffic while operating a partially automated vehicle. Proposing various computer vision algorithms, techniques and methodologies, the authors also provide a general review of computer vision technologies that are relevant for driver assistance and fully autonomous vehicles. Computer Vision for Driver Assistance is the first book of its kind and will appeal to undergraduate and graduate students, researchers, engineers and those generally interested in computer vision-related topics in modern vehicle design.
Download or read book Introduction to Genetic Algorithms written by S.N. Sivanandam and published by Springer Science & Business Media. This book was released on 2007-10-24 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a basic introduction to genetic algorithms. It provides a detailed explanation of genetic algorithm concepts and examines numerous genetic algorithm optimization problems. In addition, the book presents implementation of optimization problems using C and C++ as well as simulated solutions for genetic algorithm problems using MATLAB 7.0. It also includes application case studies on genetic algorithms in emerging fields.
Download or read book Driver Expectancy in Highway Design and Traffic Operations written by Gerson J. Alexander and published by . This book was released on 1986 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expectancy relates to a driver's readiness to respond to situations, events, and information in predictable and successful ways. This report describes the concept of driver expectancy in the context of the driving task, and provides examples of expectancy and expectancy violations. It includes a procedure for identifying general and specific expectancy violations to enable engineers to develop remedial treatments to deal with expectancy problems.
Download or read book Vehicle Dynamics and Control written by Rajesh Rajamani and published by Springer Science & Business Media. This book was released on 2011-12-21 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicles. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability control has been enhanced. The use of feedback control systems on automobiles is growing rapidly. This book is intended to serve as a useful resource to researchers who work on the development of such control systems, both in the automotive industry and at universities. The book can also serve as a textbook for a graduate level course on Vehicle Dynamics and Control.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Vehicle Powertrain Systems written by David Crolla and published by John Wiley & Sons. This book was released on 2011-12-30 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The powertrain is at the heart of vehicle design; the engine – whether it is a conventional, hybrid or electric design – provides the motive power, which is then managed and controlled through the transmission and final drive components. The overall powertrain system therefore defines the dynamic performance and character of the vehicle. The design of the powertrain has conventionally been tackled by analyzing each of the subsystems individually and the individual components, for example, engine, transmission and driveline have received considerable attention in textbooks over the past decades. The key theme of this book is to take a systems approach – to look at the integration of the components so that the whole powertrain system meets the demands of overall energy efficiency and good drivability. Vehicle Powertrain Systems provides a thorough description and analysis of all the powertrain components and then treats them together so that the overall performance of the vehicle can be understood and calculated. The text is well supported by practical problems and worked examples. Extensive use is made of the MATLAB(R) software and many example programmes for vehicle calculations are provided in the text. Key features: Structured approach to explaining the fundamentals of powertrain engineering Integration of powertrain components into overall vehicle design Emphasis on practical vehicle design issues Extensive use of practical problems and worked examples Provision of MATLAB(R) programmes for the reader to use in vehicle performance calculations This comprehensive and integrated analysis of vehicle powertrain engineering provides an invaluable resource for undergraduate and postgraduate automotive engineering students and is a useful reference for practicing engineers in the vehicle industry
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
Download or read book Electric and Hybrid Vehicles written by Amir Khajepour and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level introductory book covering fundamental aspects, design and dynamics of electric and hybrid electric vehicles There is significant demand for an understanding of the fundamentals, technologies, and design of electric and hybrid electric vehicles and their components from researchers, engineers, and graduate students. Although there is a good body of work in the literature, there is still a great need for electric and hybrid vehicle teaching materials. Electric and Hybrid Vehicles: Technologies, Modeling and Control – A Mechatronic Approach is based on the authors’ current research in vehicle systems and will include chapters on vehicle propulsion systems, the fundamentals of vehicle dynamics, EV and HEV technologies, chassis systems, steering control systems, and state, parameter and force estimations. The book is highly illustrated, and examples will be given throughout the book based on real applications and challenges in the automotive industry. Designed to help a new generation of engineers needing to master the principles of and further advances in hybrid vehicle technology Includes examples of real applications and challenges in the automotive industry with problems and solutions Takes a mechatronics approach to the study of electric and hybrid electric vehicles, appealing to mechanical and electrical engineering interests Responds to the increase in demand of universities offering courses in newer electric vehicle technologies
