Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.
Download or read book Perspective of Carbon Nanotubes written by Hosam El-Din Saleh and published by BoD – Books on Demand. This book was released on 2019-12-11 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes belong to new nanomaterials and have been known for almost 20 years, but their history is somewhat lengthier. They have been identified as promising candidates for various applications.High-temperature preparation techniques are conventional techniques for the synthesis of carbon nanotubes using arc discharge or laser ablation, but today these methods are being replaced by low-temperature vapor deposition techniques, since orientation, alignment, nanotube length, diameter, purity, and density of carbon nanotubes can be precisely controlled. The synthesis of carbon nanotubes by chemical vapor deposition on catalyst arrays leads to nanotube models grown from specific sites on surfaces. The controlled synthesis of nanotubes opens up interesting possibilities in nanoscience and nanotechnologies, including electrical, mechanical and electromechanical properties and devices, chemical functionalization, surface chemistry and photochemistry, molecular sensors, and interfacing with moderate biological systems.Carbon nanotubes are used in many applications due to their unique electrical, mechanical, optical, thermal, and other properties. Conductive and high-strength composite materials, energy saving and energy conversion devices, sensors, visualization of field emissions and sources of radiation, means for storing hydrogen, and nanoscale semiconductor devices, probes, and interconnections are some of the many applications of carbon nanotubes.
Download or read book Single Walled Carbon Nanotubes written by Yan Li and published by Springer. This book was released on 2019-05-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. - Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery - Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines - High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Carbon Nanotubes written by Ado Jorio and published by Springer Science & Business Media. This book was released on 2007-12-18 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Carbon Nanotubes: Synthesis, Structure, Properties and Applications, this second volume focuses on those areas that have grown rapidly in the past few years. Contributing authors reflect the multidisciplinary nature of the book and are all leaders in their particular areas of research. Among the many topics they cover are graphene and other carbon-like and tube-like materials, which are likely to affect and influence developments in nanotubes within the next five years. Extensive use of illustrations enables you to better understand and visualize key concepts and processes.
Download or read book The Science and Technology of Carbon Nanotubes written by T. Yamabe and published by Elsevier. This book was released on 1999-08-17 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes (CNT) is the material lying between fullerenes and graphite as a new member of carbon allotropes. The study of CNT has gradually become more and more independent from that of fullerenes. As a novel carbon material, CNTs will be far more useful and important than fullerenes from a practical point of view, in that they will be directly related to an ample field of nanotechnology. This book presents a timely, second-generation monograph covering as far as practical, application of CNT as the newest science of these materials. Most updated summaries for preparation, purification and structural characterisation of single walled CNT and multi walled CNT are given. Similarly, the most recent developments in the theoretical treatments of electronic structures and vibrational structures are covered. The newest magnetic, optical and electrical solid-state properties providing a vital base to actual application technologies are described. Explosive research trends towards application of CNTs, including the prospect for large-scale synthesis, are also introduced. It is the most remarkable feature of this monograph that it devotes more than a half of the whole volume to practical aspects and offers readers the newest developments of the science and technological aspects of CNTs.
Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
Download or read book Synthesis and Applications of Nanocarbons written by Jean-Charles Arnault and published by John Wiley & Sons. This book was released on 2020-09-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial overview of the cutting-edge in nanocarbon research and applications In Synthesis and Applications of Nanocarbons, the distinguished authors have set out to discuss fundamental topics, synthetic approaches, materials challenges, and various applications of this rapidly developing technology. Nanocarbons have recently emerged as a promising material for chemical, energy, environmental, and medical applications because of their unique chemical properties and their rich surface chemistries. This book is the latest entry in the Wiley book series Nanocarbon Chemistry and Interfaces and seeks to comprehensively address many of the newly surfacing areas of controversy and development in the field. This book introduces foundational concepts in nanocarbon technology, hybrids, and applications, while also covering the most recent and cutting-edge developments in this area of study. Synthesis and Applications of Nanocarbons addresses new discoveries in the field, including: · Nanodiamonds · Onion-like carbons · Carbon nanotubes · Fullerenes · Carbon dots · Carbon fibers · Graphene · Aerographite This book provides a transversal view of the various nanocarbon materials and hybrids and helps to share knowledge between the communities of each material and hybrid type.
Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of all of the important aspects of carbon nanotube research, including synthesis, properties and potential applications.
Download or read book Springer Handbook of Nanomaterials written by Robert Vajtai and published by Springer Science & Business Media. This book was released on 2013-08-20 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Nanomaterials covers the description of materials which have dimension on the "nanoscale". The description of the nanomaterials in this Handbook follows the thorough but concise explanation of the synergy of structure, properties, processing and applications of the given material. The Handbook mainly describes materials in their solid phase; exceptions might be e.g. small sized liquid aerosols or gas bubbles in liquids. The materials are organized by their dimensionality. Zero dimensional structures collect clusters, nanoparticles and quantum dots, one dimensional are nanowires and nanotubes, while two dimensional are represented by thin films and surfaces. The chapters in these larger topics are written on a specific materials and dimensionality combination, e.g. ceramic nanowires. Chapters are authored by well-established and well-known scientists of the particular field. They have measurable part of publications and an important role in establishing new knowledge of the particular field.
Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.
Download or read book Carbon Nanotubes and Related Structures written by Peter John Frederich Harris and published by Cambridge University Press. This book was released on 2001-10-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a 1999 book on carbon nanotubes, one of the most exciting areas in materials chemistry.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book 21st Century Advanced Carbon Materials for Engineering Applications written by Mujtaba Ikram and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced carbon materials such as graphene, fullerenes, hierarchical carbon, and carbon nanotubes (CNTs) have exceptional physical properties, making them useful for several applications in fields ranging from energy and industry to electronics and drug delivery. This book includes comprehensive information on fabrication, emerging physical properties, and technological applications of advanced carbon materials. Over three sections, chapters cover such topics as advanced carbon materials in engineering, conjugation of graphene with other 2D materials, fabrication of CNTs and their use in tissue engineering and orthopaedics, and advanced carbon materials for sustainable applications, among others.
Download or read book Carbon Nanotubes written by Stephanie Reich and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are exceptionally interesting from a fundamental research point of view. Many concepts of one-dimensional physics have been verified experimentally such as electron and phonon confinement or the one-dimensional singularities in the density of states; other 1D signatures are still under debate, such as Luttinger-liquid behavior. Carbon nanotubes are chemically stable, mechanically very strong, and conduct electricity. For this reason, they open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This text is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for a wide scientific readership, each chapter consists of an instructive approach to the topic and sustainable ideas for solutions. The former is generally comprehensible for physicists and chemists, while the latter enable the reader to work towards the state of the art in that area. The book gives for the first time a combined theoretical and experimental description of topics like luminescence of carbon nanotubes, Raman scattering, or transport measurements. The theoretical concepts discussed range from the tight-binding approximation, which can be followed by pencil and paper, to first-principles simulations. We emphasize a comprehensive theoretical and experimental understanding of carbon nanotubes including - general concepts for one-dimensional systems - an introduction to the symmetry of nanotubes - textbook models of nanotubes as narrow cylinders - a combination of ab-initio calculations and experiments - luminescence excitation spectroscopy linked to Raman spectroscopy - an introduction to the 1D-transport properties of nanotubes - effects of bundling on the electronic and vibrational properties and - resonance Raman scattering in nanotubes.
Download or read book Synthesis and Applications of Nanocarbons written by Jean-Charles Arnault and published by John Wiley & Sons. This book was released on 2020-08-28 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial overview of the cutting-edge in nanocarbon research and applications In Synthesis and Applications of Nanocarbons, the distinguished authors have set out to discuss fundamental topics, synthetic approaches, materials challenges, and various applications of this rapidly developing technology. Nanocarbons have recently emerged as a promising material for chemical, energy, environmental, and medical applications because of their unique chemical properties and their rich surface chemistries. This book is the latest entry in the Wiley book series Nanocarbon Chemistry and Interfaces and seeks to comprehensively address many of the newly surfacing areas of controversy and development in the field. This book introduces foundational concepts in nanocarbon technology, hybrids, and applications, while also covering the most recent and cutting-edge developments in this area of study. Synthesis and Applications of Nanocarbons addresses new discoveries in the field, including: · Nanodiamonds · Onion-like carbons · Carbon nanotubes · Fullerenes · Carbon dots · Carbon fibers · Graphene · Aerographite This book provides a transversal view of the various nanocarbon materials and hybrids and helps to share knowledge between the communities of each material and hybrid type.
Download or read book Physical Properties Of Carbon Nanotubes written by G Dresselhaus and published by World Scientific. This book was released on 1998-07-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introductory textbook for graduate students and researchers from various fields of science who wish to learn about carbon nanotubes. The field is still at an early stage, and progress continues at a rapid rate. This book focuses on the basic principles behind the physical properties and gives the background necessary to understand the recent developments. Some useful computational source codes which generate coordinates for carbon nanotubes are also included in the appendix.
