Download or read book Synthesis Physicochemical Characterization and Catalytic Evaluation of Three dimensionally Ordered Macroporous Metal Oxide Catalysts and Photocatalysts written by Mohammed Abdulmajeed Al-Daous and published by . This book was released on 2003 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Testing of Three dimensionally Ordered Macroporous Materials for Pseudomorphic Transformation and Power Storage written by Justin Conrad Lytle and published by . This book was released on 2005 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Based Photocatalysis written by Adriana Zaleska-Medynska and published by Elsevier. This book was released on 2018-04-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Photocatalysis: Fundamentals and Prospects for Application explains the principles and fundamentals of metal oxide-based photocatalysis and the requirements necessary for their use in photocatalysis. It also discusses preparation methods for photocatalysis, and the advantages, disadvantages and achievements of the most important metal oxides (TiO2, ZnO, Fe2O3, Ta2O3, CuO, NiO, Cr2O3, RuO2, etc.). The book concludes with the most important photocatalytic applications and an overview of the future. Applications are organized by potential needs and solutions, addressing such areas as water treatment, hydrogen production, air treatment, chemical synthesis, and applications in medicine and construction. Provides coverage of applications, presenting needs and solutions Covers essential applications, such as water treatment, hydrogen production, air depollution, medical applications, and much more Includes the characterization of the most important metal oxides used in heterogeneous photocatalysis
Download or read book Crystalline Metal Oxide Catalysts written by Wataru Ueda and published by Springer Nature. This book was released on 2022-10-26 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the innovatively advanced crystalline metal oxide catalysts that have multi-catalytic functions on the basis of spatially placed elements in crystal structure. With authors who are experts in their fields, the chapters of the book are organized according to catalytic function, on the basis of crystal structure. The book also covers the structure determination of micro–nano-sized metal oxide crystals that are now standard in most catalytic materials and new trends in catalyst development using materials informatics and catalytic informatics. The information contained here will guide researchers who are eager to carry out sustainable catalytic processes and ultimately to achieve a sustainable society in their quest for catalyst development.
Download or read book Design and Fabrication of Nanostructured Materials for Power Generation and Nanocoposites written by Nicholas Selig Ergang and published by . This book was released on 2006 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advancement of Metal Oxide Materials for Photocatalytic Application written by Vitaly Gurylev and published by Springer Nature. This book was released on 2022-12-07 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates applicability of various emerging strategies to improve important properties and features of metal oxide materials that can be used further to advance their photocatalytic and photoelectrochemical performances. The range of discussed strategies includes introduction of intrinsic and extrinsic deficiencies, fabrication of heterojunction and utilizing of metal nanoparticles in the form of deposited or embedded formations. Each of them is addressed as separate case in order to reach full and comprehensive assessment of their most fundamental principles and basics as well as accessing pivotal advantages and disadvantages. Furthermore, additional discussion is dedicated to achieving thorough awareness over methods and experimental protocols that are used to realize them and also probing changes which they induce in electronic and geometrical configurations of metal oxide materials. It is believed that this book might become a valuable addition to extend further current knowledge about photocatalysis and material processing.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Photocatalysts written by Hiromi Yamashita and published by Springer. This book was released on 2016-05-03 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on semiconductor TiO2 photocatalysis are legion, nanostructured controlled photocatalysts are attractive beyond standard semiconductors, and this book is devoted to the many novel uses of advanced TiO2 and MOF-based photocatalysts. Details on synthesis, characterization, and reaction applications of nanostructured photocatalysts are summarized. Other new materials discussed in this book are Bi- W- oxides, metal complexes, and unique porous materials. This book contains methods of preparation and characterization of unique nanostructured photocatalysts, and details about their catalytic action. Contributors to this volume are leading Asian researchers in Photocatalysis. It will appeal to researchers wishing to know how to design new types of photocatalysts with controlled nanostructures.
Download or read book Visible Light Active Photocatalysis written by Srabanti Ghosh and published by John Wiley & Sons. This book was released on 2018-03-29 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and timely overview of this important and hot topic, with special emphasis placed on environmental applications and the potential for solar light harvesting. Following introductory chapters on environmental photocatalysis, water splitting, and applications in synthetic chemistry, further chapters focus on the synthesis and design of photocatalysts, solar energy conversion, and such environmental aspects as the removal of water pollutants, photocatalytic conversion of CO2. Besides metal oxide-based photocatalysts, the authors cover other relevant material classes including carbon-based nanomaterials and novel hybrid materials. Chapters on mechanistic aspects, computational modeling of photocatalysis and Challenges and perspectives of solar reactor design for industrial applications complete this unique survey of the subject. With its in-depth discussions ranging from a comprehensive understanding to the engineering of materials and applied devices, this is an invaluable resource for a range of disciplines.
Download or read book Photocatalysts written by Nasser S. Awwad and published by BoD – Books on Demand. This book was released on 2023-04-12 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes fourteen chapters on photocatalysis. It provides a thorough overview of the latest research on photocatalysts and examines recent trends in the field. Chapters address such topics as metal-organic frameworks, semiconductors, self–cleaning coatings and surfaces, the use of “green” agents to fabricate materials, fabrication of advanced nanocomposites for the production of hydrogen, bifunctional catalysts for metal-air batteries, and much more.
Download or read book Photocatalysts Part I written by Juan Manuel Peralta-Hernández and published by Trans Tech Publications Ltd. This book was released on 2023-05-17 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggregated Book
Download or read book Polyoxomolybdates as Green Catalysts for Aerobic Oxidation written by Anjali Patel and published by Springer. This book was released on 2014-11-22 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneously catalyzed selective oxidations of alcohols is a highly topical field. The first chapter of this brief describes the importance of the selective oxidation of alcohols and advantages of heterogeneous catalysts over conventional catalysts, use of environmentally benign oxidants, and the design of selective catalysts by tailoring of polyoxometalates at the molecular level. Chapter 2 describes synthesis, characterization 11-molybdophosphate based supported materials and their use as heterogeneous catalysts for oxidation of alcohols with molecular oxygen under solvent free mild reaction condition. ZrO2, Al2O3, MCM-41 and zeolite Hβ were used as supports. Chapter 3 describes synthesis, characterization of transition metals (Mn, Co, Ni, Cu)- substituted phosphomolybdates and their use as heterogeneous catalysts for oxidation of alcohols with molecular oxygen under solvent free mild reaction condition. Chapter 4 describes conclusive remarks for present catalytic systems.
Download or read book Synthesis and Characterization of Transition Metal Oxide Catalysts for Environmental and Energy Storage Applications written by Wenqiao Song and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, environmental concerns and the global energy crisis have become two of our greatest challenges. The main purpose of this dissertation research is to design highly active mesoporous materials that can efficiently catalyze environmental and energy related reactions. Surface properties can be easily tuned by thermal treatment and cation doping, resulting in improved catalytic activities. Synthesis and characterization of the materials, catalytic activities for carbon monoxide oxidation, oxygen reduction and oxygen evolution reactions, and mechanistic studies are covered in this thesis. The first part describes the synthesis of mesoporous cobalt oxides through an inverse micelle route for low temperature carbon monoxide oxidation applications. The prepared material showed much better activity and stability compared with commercial cobalt oxide due to its nanoparticle nature and porous structure. The catalytic performance under both dry and moisture rich conditions were tested. Detailed characterization of the materials suggested that high surface areas and the presence of surface oxygen vacancies were critical for enhanced activities. In real systems, structured catalysts such as monolithic substrates coated with a layer of active material are used instead of powder form catalysts. To evaluate the potential of our catalysts to be used in practical catalytic devices, mesoporous metal oxides (MnOx, Co3O4, CeO2) were coated on cordierite substrate by dip coating and in-situ growth and were used as low temperature diesel oxidation catalysts. The resulting materials showed promising catalytic performance. The effect of particle size, loading amount and Cu doping on the catalytic performance are discussed in detail. In the last part, mesoporous cobalt oxides were used as bifunctional catalysts for oxygen reduction and oxygen evolution reactions. If a catalyst can catalyze both reactions, it will have great potential in the application of rechargeable metal air batteries. Ni and Mn doping were introduced into the cobalt oxide material to increase the conductivity and active site population. The Ni incorporated cobalt oxide exhibited the best activity, which can be considered as a potential substituent for precious metal catalysts (Pt, Ir, Ru). Furthermore, the intrinsic structure-property relationships of the materials were established.
Download or read book Visible Light Photocatalyzed Redox Neutral Organic Reactions and Synthesis of Novel Metal Organic Frameworks written by Basudev Sahoo and published by . This book was released on 2017 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Applications of Mo W Based Catalysts in the Petroleum and Chemical Industry Emerging Research and Opportunities written by Ge, Hui and published by IGI Global. This book was released on 2017-02-08 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mo(W)-Based Catalysts have the capacity to drastically impact many different industries. Research on their most current applications is important for the success of many organizations and companies, specifically the chemical and petroleum industries. Innovative Applications of Mo(W)-Based Catalysts in the Petroleum and Chemical Industry: Emerging Research and Opportunities is an informative resource that overviews emerging methods and techniques that incorporate 2D layer Mo(W) dichalcogenides. Featuring extensive coverage on a range of subjects including 2D nanosheets, hybridization, dichacogenides, and oxide based catalysts, this is an ideal publication for academicians, students, engineers, and researchers seeking insight on the latest advancements in Mo(W)-Based catalyst applications.
Download or read book Application of Transition Metal Catalysts in Organic Synthesis written by L. Brandsma and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous catalysis is an important strategy for the synthesis of high-valued chemicals. L. Brandsma has carefully selected and checked the experimental procedures illustrating the catalytic use of copper, nickel, and palladium compounds in organic synthesis. All procedures are on a preparative scale, make economic use of solvents and catalysts, avoid toxic substances and have high yields.
Download or read book Metal Organic Frameworks MOFs as Catalysts written by Shikha Gulati and published by Springer Nature. This book was released on 2022-02-18 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the state-of-the-art research and discovery in the use of MOFs in catalysis, highlighting the scope to which these novel materials have been incorporated by the community. It provides an exceptional insight into the strategies for the synthesis and functionalization of MOFs, their use as CO2 and chemical warfare agents capture, their role in bio-catalysis and applications in photocatalysis, asymmetric catalysis, nano-catalysis, etc. This book will also emphasize the challenges with previous signs of progress and way for further research, details relating to the current pioneering technology, and future perspectives with a multidisciplinary approach. Furthermore, it presents up-to-date information on the economics, toxicity, and regulations related to these novel materials.
