Download or read book Synthesis of Silver diamond Like Carbon Thin Films by Magnetron Sputtering written by Venkatesh Majji and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond-like carbon thin films are been used in wide range of applications due to their attractive tribological properties. Metal-doped DLC films have significant properties which make them compatible to use in larger variety of applications. The present study examines the dispersion and their effect on various tribological properties when Ag is incorporated into the DLC thin films. These Ag-DLC nanocomposite films were synthesized by a hybrid CVD and magnetron sputtering process in a discharge composed of CH4, and Ar atmosphere. These DLC and Ag-DLC films were characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. Tribological tests were carried out to measure the frictional and wear behavior of the Ag-DLC films as a function of Ag content. The TEM cross sectional studies revealed that Ag is present as Ag nanoparticles that were distributed uniformly throughout an amorphous DLC matrix. XPS analysis confirmed that Ag in the nanoparticles was present in the metallic form. Increasing the Ag content in the film, reduced its sp3 content. The incorporation of these nanoparticles causes a reduction in hardness in Ag-DLC when compared with pure DLC films. Microhardness of DLC films exhibits values up to a maximum of 16 GPa and gradually decreases with increasing in Ag content. FTIR and Raman studies confirmed that the films contain a significant amount of hydrogen, and with an increase in the Ag content in the DLC film results in an increase in sp2 carbon content. Finally, the friction behavior of the Ag-DLC films showed a comparable performance with that of DLC films with a coefficient of friction as low as 0.1. The DLC films exhibited a lower wear rate of 5.51x10−8 mm3/Nm than Ag-DLC films. The wear rate in the Ag-DLC films gradually increased with increasing Ag content but it remained at low levels (i.e., up to 1.7x10−7 mm3/Nm). This is consistent with the higher sp2 content of the Ag-DLC films.
Download or read book Synthesis Structure and Characterization of Silver Doped Diamond Like Carbon Thin Films written by Pankaj Jyoti Hazarika and published by ProQuest. This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond like carbon (DLC) films have gained grounds in the biomedical field as an inert, biocompatible, low friction and wear resistant coating and are widely used in heart valves, coronary artery stents, dental implants, knee prosthesis and other vascular devices. In addition, Ag nanoparticles/films can prevent the formation of biofilm on biomedical implants by degrading the metabolic activities like permeability and respiration and also impair DNA replicability. Thus, Ag-doped DLC (Ag-DLC) can serve as a multifunctional bio coating combining desirable antibacterial and physical/mechanical characteristics. In the present study, Ag-DLC films were synthesized utilizing a hybrid Plasma CVD and Magnetron sputtering process in a CH4/Ar glow discharge. Nanocomposite films containing Ag nanoparticles in an amorphous DLC matrix with various amounts of Ag were synthesized and characterized by Transmission Electron Microscope (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). Tribological experiments were performed to assess the frictional behavior and wear resistance of the Ag-DLC films as a function of Ag content. Anodic polarization experiments were conducted to characterize the electrochemical behavior of the Ag-DLC films. TEM results revealed that Ag nanoparticles of 4-7 nm in size were uniformly distributed in an amorphous DLC matrix. Microhardness of DLC films exhibited a hardness of 22 GPa and it gradually decreased with increasing Ag content in the films. Wear rate of DLC film was 1.9 x 10-8 mm3/Nm and it increased to 8 x 10-7 mm3/Nm for Ag-DLC (5% Ag) film. Electrochemical behavior experiments showed that Ag-DLC films exhibited an inert behavior compared to the pure silver.
Download or read book Characterization of Diamond Like Carbon Thin Films Fabricated by Unbalanced Magnetron Sputtering Under Ultra high Vacuum Conditions written by Kevin W. Cooper and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanomaterials Modeling Design and Applications written by Kun Zhou and published by CRC Press. This book was released on 2019-07-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials: Modeling, Design, and Applications provides an in-depth review and analysis of the most popular carbon nanomaterials, including fullerenes, carbon nanotubes, graphene and novel carbon nanomaterial-based membranes and thin films, with emphasis on their modeling, design and applications. This book provides basic knowledge of the structures, properties and applications of carbon-based nanomaterials. It illustrates the fundamental structure-property relationships of the materials in both experimental and modeling aspects, offers technical guidance in computational simulation of nanomaterials, and delivers an extensive view on current achievements in research and practice, while presenting new possibilities in the design and usage of carbon nanomaterials. This book is aimed at both undergraduate and graduate students, researchers, designers, professors, and professionals within the fields of materials science and engineering, mechanical engineering, applied physics, and chemical engineering.
Download or read book Deposition Characterization and Tribological magnetic Studies of Diamond like Carbon and Magnetic Thin Films written by Geng Wang and published by . This book was released on 1997 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Materials and their Applications written by Bibhu Prasad Swain and published by Springer Nature. This book was released on 2020-10-28 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an introduction to nanostructured materials and guides the reader through their different engineering applications. It gives an overview of nanostructured materials applied in the fields of physics, chemistry, biology, medicine, and materials science. Materials for different applications in engineering such as those used in opto-electronics, energy, tribology, bio-applications, catalysis, reinforcement and many more have been described in this book. The book will be of interest to researchers and students who want to learn about applications of nanostructured materials in engineering.
Download or read book Synthesis and Characterization of Diamond like Carbon and DLC MoS2 Composite Thin Films written by Hamid Niakan and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis of Carbon based and Metal Oxide Thin Films Using High Power Impulse Magnetron Sputtering written by Asim Aijaz and published by . This book was released on 2014 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and characterization of diamond like carbon thin films prepared by pulsed laser deposition method written by Jaanus Eskusson and published by . This book was released on 2009 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diamond and Carbon Composites and Nanocomposites written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2016-06-29 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years, scientists have achieved significant successes in nanoscience and technology. Nanotechnology is a branch of science that deals with fine structures and materials with very small dimensions - less than 100 nm. The composite science and technology have also benefits from nanotechnology. This book collects new developments about diamond and carbon composites and nanocomposites and their use in manufacturing technology.
Download or read book Thin Film Diamond written by A.H. Lettington and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work, written by leading international authorities, deals with nucleation growth and processing, characterization and electrical, thermal, optical and mechanical properties of thin film diamond. The final chapters are devoted to the broad range of applications of this material.
Download or read book Diamond like Carbon Films written by Yuto S. Tanaka and published by Nova Biomedical Books. This book was released on 2012-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research from across the globe in the study of diamond-like carbon films. Topics discussed include the peculiarities of ion-beam synthesis of carbon-based phases; electron field emission properties of non-metal and metal doped diamond like carbon; internal stress and its reduction of hydrogenated diamond-like carbon thin films deposited by plasma CVD methods; incorporating crystalline diamond particles in diamond-like carbon films to improve their properties and diamond-like carbon films applied as an alignment layer for LCDs.
Download or read book Polymer Blends and Compatibilization written by Volker Altstädt and published by MDPI. This book was released on 2018-07-02 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Polymer Blends and Compatibilization" that was published in Materials
Download or read book Aerospace Materials Handbook written by Sam Zhang and published by CRC Press. This book was released on 2016-04-19 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether an airplane or a space shuttle, a flying machine requires advanced materials to provide a strong, lightweight body and a powerful engine that functions at high temperature. The Aerospace Materials Handbook examines these materials, covering traditional superalloys as well as more recently developed light alloys. Capturing state-of-the-art d
Download or read book Synthesis and Characterization of Boron Incorporated Diamond like Carbon Thin Films written by Linlin Zhang and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Composite Coatings and Membranes written by Maria Fatima Montemor and published by Elsevier. This book was released on 2015-11-09 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Composite Coatings and Membranes: Transport, Structural, Environmental and Energy Applications provides the latest information on the increase in demand for new smart materials for a wide array of different technological applications. The book comprehensively reviews the latest developments in smart composite materials used as membranes, barriers, and coatings, with a special focus on corrosion protection, transportation, structure, and the wide range of applications. Part one examines the properties, processing, and manufacture of smart composite materials, along with techniques for modeling the behavior of these materials, while other sections review the use of smart composite coatings in aerospace, marine, and metal structural applications, examine the protective properties and applications of smart composite coatings, and introduce specific low environmental impact and energy efficient applications, such as energy generation and storage, water management, and stone conservation. Explores the use of smart composite materials for coatings, barriers and membranes Comprehensively reviews the latest developments in smart composite materials, with a special focus on corrosion protection, transportation, structure, and the wide range of applications Examines the properties, processing, manufacture and behavior modeling of smart composite materials Focuses on applications that have an impact on more effective energy savings and efficiency, green-house emissions, and environmental protection
Download or read book Synthesis and Adhesion of Diamond and Diamond like Carbon DLC Films written by Xilin Peng and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
