Download or read book Synthesis Characterization and Enhanced Magnetic Properties of Iron Carbide Nanomaterials written by Brent M. Williams and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnets are classified as hard magnetic materials with the main purpose of generating flux for applications such as electric motors, turbines, and hard drives. High coercivity, magnetic remanence, and saturation values with high stability are some of the requirements for permanent magnets. Rare-earth magnets including neodymium and samarium based magnets are known to have superior magnetic properties due to their high magnetocrystalline anisotropy. However, due to the price of rare-earth materials development of alternate permanent magnets composed of inexpensive materials is an ongoing process. Previously cobalt carbide (CoxC) have shown promise as a potential rare-earth free magnet alternative with magnetic properties comparable to that of hexaferrite materials. Unfortunately, CoxC magnets have a low magnetic saturation (50 emu g−1) which drastically lowers its energy product. Alternatively, iron carbide has a rather high bulk magnetization value of 140 emu g−1 and is composed of naturally abundant materials. The sole issue of iron carbide is that it is considered an intermediate magnet with properties between those of a hard and a soft magnetic material. The main focus of this work is the enhancement of the hard magnetic properties of iron carbide through size effect, shape anisotropy, magnetocrystalline anisotropy and exchange anisotropy. First a wet synthesis method was developed which utilized hexadecyltrimethylammonium chloride to control particle size, shape, and crystal structure to manipulate the magnetic properties of iron carbide. With this method a semi-hard 50 nm orthorhombic Fe3C phase and a magnetically soft single crystal hexagonal Fe--C3 structure with texture-induced magnetic properties were developed. The properties for both materials were further enhanced through formation of exchange bias Fe3C/CoO nanoaggregates and spring exchange coupling of the ferromagnetically hard and soft phases of Fe--C3/SrFe12O19. A 33% increase in coercivity was observed at room temperature for the antiferro/ferromagnetic Fe3C/CoO in comparison to the bare Fe3C. While iron carbide enhanced the magnetic saturation and remanence of strontium ferrite. This work concludes that with further development of iron carbide nanocomposites they may be employed as future alternative permanent magnets.
Download or read book Magnetic Nanomaterials written by Uyiosa Osagie Aigbe and published by Springer Nature. This book was released on 2023-08-19 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores some of the latest and recent advances in the synthesis, characterization and applications of magnetic nanomaterials. It starts with an overview of magnetic nanomaterials, followed by a list of their synthesis and characterization methods. The book shows the potential of magnetic materials in different applications, including theranostic nanomedicine, heavy metals detection, dyes sensing, solar cells, wastewater treatment, decontamination of soil, and detection and monitoring of toxic gases. Moreover, it explores their use as drug and gene delivery agents, their biosafety and bioregulation facets, tissue engineering applications, and their potential for combating pathogens
Download or read book Synthesis and Characterization of Cobalt Carbide Based Nanomaterials written by Zachary John Huba and published by . This book was released on 2014 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permanent magnets are used heavily for multiple applications in industry and current electronic technologies. However, the current permanent landscape is muddled by high cost of materials and insufficient magnetic or thermal properties. The primary focus of this dissertation work is the synthesis and optimization of a new permanent magnetic material, in the form of cobalt carbide nanomaterials. The optimization revolved around controlling the crystal phase and particle shape of synthesized cobalt carbide particles; these parameters have significant impact on the observed magnetic properties of magnetic nanoparticles. Co3C was identified to be the preferred crystal phase, leading to better magnetic properties. Cobalt Fumarate was found to be the ideal precursor to synthesize anisotropic Co3C particles and enhance magnetic properties of the synthesized cobalt carbide particles. Lastly, an ethanol based reduction system was employed to develop the greener synthesis of Co and Ni magnetic particles.
Download or read book Magnetic Nanoparticles written by Abdollah Hajalilou and published by John Wiley & Sons. This book was released on 2022-10-06 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Nanoparticles Learn how to make and use magnetic nanoparticles in energy research, electrical engineering, and medicine In Magnetic Nanoparticles: Synthesis, Characterization, and Applications, a team of distinguished engineers and chemists delivers an insightful overview of magnetic materials with a focus on nano-sized particles. The book reviews the foundational concepts of magnetism before moving on to the synthesis of various magnetic nanoparticles and the functionalization of nanoparticles that enables their use in specific applications. The authors also highlight characterization techniques and the characteristics of nanostructured magnetic materials, like superconducting quantum interference device (SQUID) magnetometry. Advanced applications of magnetic nanoparticles in energy research, engineering, and medicine are also discussed, and explicit derivations and explanations in non-technical language help readers from diverse backgrounds understand the concepts contained within. Readers will also find: A thorough introduction to magnetic materials, including the theory and fundamentals of magnetization In-depth explorations of the types and characteristics of soft and hard magnetic materials Comprehensive discussions of the synthesis of nanostructured magnetic materials, including the importance of various preparation methods Expansive treatments of the surface modification of magnetic nanoparticles, including the technical resources employed in the process Perfect for materials scientists, applied physicists, and measurement and control engineers, Magnetic Nanoparticles: Synthesis, Characterization, and Applications will also earn a place in the libraries of inorganic chemists.
Download or read book Synthesis and characterization of magnetic nanolaminated carbides written by Andrejs Petruhins and published by Linköping University Electronic Press. This book was released on 2018-03-15 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: MAX phases are a group of nanolaminated ternary carbides and nitrides, with a composition expressed by the general formula Mn+1AXn (?? = 1 ? 3), where M is a transition metal, A is an A-group element, and X is carbon and/or nitrogen. MAX phases have attracted interest due to their unique combination of metallic and ceramic properties, related to their inherently laminated structure of a transition metal carbide (Mn+1Xn) layer interleaved by an A-group metal layer. This Thesis explores synthesis and characterization of magnetic MAX phases, where the A-group element is gallium (Ga). Due to the low melting point of Ga (T = 30 °C), conventional thin film synthesis methods become challenging, as the material is in liquid form at typical process temperatures. Development of existing methods has therefore been investigated, for reliable/reproducible synthesis routes, including sputtering from a liquid target, and resulting high quality material. Routes for minimizing trial-and-error procedures during optimization of thin film synthesis have also been studied, allowing faster identification of optimal deposition conditions and a simplified transfer of essential deposition parameters between different deposition systems. A large part of this Thesis is devoted towards synthesis of MAX phase thin films in the Cr-Mn-Ga-C system. First, through process development, thin films of Cr2GaC were deposited by magnetron sputtering. The films were epitaxial, however with small amount of impurity phase Cr3Ga, as confirmed by X-ray diffraction (XRD) measurements. The film structure was confirmed by scanning transmission electron microscopy (STEM) and the composition by energy dispersive X-ray spectroscopy (EDX) inside the TEM. Inspired by predictive ab initio calculations, the new MAX phase Mn2GaC was successfully synthesized in thin film form by magnetron sputtering. Structural parameters and magnetic properties were analysed. The material was found to have two magnetic transitions in the temperature range 3 K to 750 K, with a first order transition at around 214 K, going from non-collinear antiferromagnetic state at lower temperature to an antiferromagnetic state at higher temperature. The Neél temperature was determined to be 507 K, changing from an antiferromagnetic to a paramagnetic state. Above 800 K, Mn2GaC decomposes. Furthermore, magnetostrictive, magnetoresistive and magnetocaloric properties of the material were iv determined, among which a drastic change in lattice parameters upon the first magnetic transition was observed. This may be of interest for magnetocaloric applications. Synthesis of both Cr2GaC and Mn2GaC in thin film form opens the possibility to tune the magnetic properties through a solid solution on the transition metal site, by alloying the aforementioned Cr2GaC with Mn, realizing (Cr1-xMnx)2GaC. From a compound target with a Cr:Mn ratio of 1:1, thin films of (Cr0.5Mn0.5)2GaC were synthesized, confirmed by TEM-EDX. Optimized structure was obtained by deposition on MgO substrates at a deposition temperature of 600 ºC. The thin films were phase pure and of high structural quality, allowing magnetic measurements. Using vibrating sample magnetometry (VSM), it was found that (Cr0.5Mn0.5)2GaC has a ferromagnetic component in the temperature range from 30 K to 300 K, with the measured magnetic moment at high field decreasing by increasing temperature. The remanent moment and coercive field is small, 0.036 ?B, and 12 mT at 30 K, respectively. Using ferromagnetic resonance spectroscopy, it was also found that the material has pure spin magnetism, as indicated by the determined spectroscopic splitting factor g = 2.00 and a negligible magnetocrystalline anisotropy energy. Fuelled by the recent discoveries of in-plane chemically ordered quaternary MAX phases, so called i-MAX phases, and guided by ab initio calculations, new members within this family, based on Cr and Mn, were synthesized by pressureless sintering methods, realizing (Cr2/3Sc1/3)2GaC and (Mn2/3Sc1/3)2GaC. Their structural properties were determined. Through these phases, the Mn content is the highest obtained in a bulk MAX phase to date. This work has further developed synthesis processes for sputtering from liquid material, for an optimized route to achieve thin films of controlled composition and a high structural quality. Furthermore, through this work, Mn has been added as a new element in the family of MAX phase elements. It has also been shown, that alloying with different content of Mn gives rise to varying magnetic properties in MAX phases. As a result of this Thesis, it is expected that the MAX phase family can be further expanded, with more members of new compositions and new properties.
Download or read book Magnetic Nanoparticles Based on Iron written by Michael David Shultz and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic nanoparticles are of great interest for a wide range of applications. This work has focused on three primary forms of iron based nanoparticles and combinations thereof: [alpha]-iron, iron oxide, and iron carbide or cementite. The synthesis of several core-shell particles including cementite-iron oxide, [alpha]-iron-cementite, and [alpha]-iron-iron oxide was accomplished through reverse micelle routes and high temperature decomposition of iron pentacarbonyl in various media. Structural analysis to confirm the structures was performed using extended x-ray absorption fine structure (EXAFS) techniques. A rapid characterization technique was developed utilizing a correlation between Fourier transform infrared spectroscopy and EXAFS to determine the full metal cation distribution between the octahedral and tetrahedral sites in manganese zinc ferrite (MZFO). This method was then used to show that the initial Fe3+ to Fe2+ ratio in MZFO synthesis could be used to design a desired cation distribution and affected the zinc incorporation levels into the resultant ferrite. Functionalization of nanoparticles for aqueous dispersions and ferrofluids has varying degrees of importance, depending on the application. In applications such as magnetic resonance imaging (MRI) where the targets are biological systems, it was important to produce solutions that will not aggregate in the high magnetic field of the MRI. It was also vital to characterize decomposition mechanisms and products that would be presented to the body after use as a contrast agent. This work has provided insight into both the preparation of magnetic samples for MRI applications and implications of the biocompatibility of reactive and decomposition products. Three successful methods of forming dispersions that would not aggregate in the high magnetic field of the MRI were comprised of cysteine/polyethylene glycol (PEG), PEG based ferrofluids, and dopamine/PEG. The dopamine functionalization however showed reactivity with the iron/iron oxide nanoparticles and led to the formation of the cytotoxic dopamine quinone and resulted in the destruction of the nanoparticles. Using all three types of dispersions to compare the iron based nanomaterials, the MRI measurements concluded with the iron oxide ferrofluid yielding the highest R2 enhancement.
Download or read book Clinical Applications of Magnetic Nanoparticles written by Nguyen TK Thanh and published by CRC Press. This book was released on 2018-02-06 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering the latest information in magnetic nanoparticle (MNP) research, this book builds upon the success of the first volume and provides an updated and comprehensive review, from synthesis, characterization, and biofunctionalization to clinical applications of MNPs, including the diagnosis and treatment of cancers. The book captures some of emerging research area which was not available in the first volume. Good Manufacturing Practices and Commercialization of MNPs are also included. This volume, also written by some of the most qualified experts in the field, incorporates new developments in the literature, and continues to bridge the gaps between the different areas in this field.
Download or read book Synthesis Characterization and Functionalization of Magnetic Iron Nanoparticles for Enhanced Biological Applications written by Christopher Ryan Warren and published by . This book was released on 2013 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transition metal ferrites of composition MFe2O4 where M is Fe, Co, or Ni are well established materials for various biological applications due to their interesting magnetic properties. Their elemental and stochiometric composition can be easily manipulated which allows further tuning of their ferrimagnetic properties. By changing the identity of M and by changing the crystallite size of the ferrites, nanocrystals with diverse magnetic properties can be systematically produced. Furthermore, ferrites are more stable in diverse chemical environments, as compared to metallic nanoparticles, which make ferrites particularly useful for a broad range of biomedical applications, especially in the field of magnetic resonance imaging and cell labeling. In this work, spinel ferrites of composition CoFe2O4, NiFe2O4, and Ni.5Co.5 Fe2O4 were synthesized by a polyol method utilizing ethylene glycol as the solvent, reducing agent, and surfactant. The nanoparticles produced were surface coated with 3-aminopropyltriethoxy silane to increase solubility as well as to serve as an anchor for further conjugation with targeting substrates such as peptides and antibodies. The first part of this dissertation was focused on using the polyol method to produce nanoparticles of various metallic compositions. In each case, the polyol method provided an easy one-pot method to produce metallic as well as metal oxide nanocrystals. Utilizing the polyol method, ferrites of CoFe2O4, NiFe2O4, and Ni.5Co.5 Fe2O4 were produced with size ranges between 20 nm and 50 nm depending on the reaction time in the polyol. The second part of this dissertation was concerned with the functionalization of the nanoparticles to serve as an anchor for further conjugation with targeting substrates in the immunoaffinity separation of food borne pathogens. These nanoparticles were functionalized using an anti-E. coli O157:H7 antibody, mixed with a food matrix, and then subsequently removed from the food matrix by an external magnet in order to be analyzed by Matrix Assisted Laser Desorption Ionization/Time of Flight (MALDI/TOF) Mass Spectrometry as a rapid identification method of bacterial pathogens. Furthermore, magnetic resonance imaging (MRI) was carried out on the polyol produced ferrites in order to measure the transverse relaxation time (T2) of the nanoparticles in order to investigate the size dependence and crystallite composition of the particles ability to affect the transverse relaxivity rarte (r2). Further understanding of how ferrite composition and crystallite size affect their magnetic properties and resulting MRI contrast abilities will provide insight into the best materials for the next generation of contrast agents. Lastly, the ability of nanoparticles to serve as a stationary phase material for reversed phase ultrahigh pressure liquid chromatography will be discussed as a novel separation technique.
Download or read book Synthesis and Characterization of Carbon Magnetic Nanoparticles written by Sunilsingh Gusain and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon incorporated iron nanoparticles (Fe-CNPs) were successfully synthesized using ultrasonic cavitation in Benzene. This novel method of carbon nanoparticle (CNP) synthesis is a very cost-effective and versatile as one can easily tune the microstructure and magnetic properties by varying few parameters, for e.g. voltage. The Fe-CNP complexes are produced due to the electric plasma discharge generated between the electrodes in an ultrasonic cavitation field of liquid benzene. The constituent of the CNPs can be easily modified by different choice of electrode materials- iron and graphite. The resultant Fe-CNPs were characterized by high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy to reveal the presence of different forms of carbon and iron carbide particles. TEM results of Fe-CNP and CNP show lattice fringe and a diffraction pattern suggesting crystalline form of carbon form. Raman spectroscopy of Fe-CNPs shows similarity to that of diamond powder thus suggesting that the crystallinity of the samples can be easily varied as well. The magnetic properties were investigated using superconducting quantum interference measurement devise (SQUID). The Fe-CNP show zero coercivity and increase in saturation magnetization with increase in synthesis voltage. On the other hand, the CNP produced using graphite electrodes are found to be magnetic in nature. Chemical analysis shows that the Fe- CNPs have iron constituent of ~3%. Biological applications of Fe-CNPs have been discussed.
Download or read book Iron Oxide Nanoparticles for Biomedical Applications written by Sophie Laurent and published by Elsevier. This book was released on 2017-10-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Oxide Nanoparticles for Biomedical Applications: Synthesis, Functionalization and Application begins with several chapters covering the synthesis, stabilization, physico-chemical characterization and functionalization of iron oxide nanoparticles. The second part of the book outlines the various biomedical imaging applications that currently take advantage of the magnetic properties of iron oxide nanoparticles. Brief attention is given to potential iron oxide based therapies, while the final chapter covers nanocytotoxicity, which is a key concern wherever exposure to nanomaterials might occur. This comprehensive book is an essential reference for all those academics and professionals who require thorough knowledge of recent and future developments in the role of iron oxide nanoparticles in biomedicine. - Unlocks the potential of iron oxide nanoparticles to transform diagnostic imaging techniques - Contains full coverage of new developments and recent research, making this essential reading for researchers and engineers alike - Explains the synthesis, processing and characterization of iron oxide nanoparticles with a view to their use in biomedicine
Download or read book Carbon and Oxide Nanostructures written by Noorhana Yahya and published by Springer Science & Business Media. This book was released on 2011-01-12 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers all aspects of carbon and oxide based nanostructured materials. The topics include synthesis, characterization and application of carbon-based namely carbon nanotubes, carbon nanofibres, fullerenes, carbon filled composites etc. In addition, metal oxides namely, ZnO, TiO2, Fe2O3, ferrites, garnets etc., for various applications like sensors, solar cells, transformers, antennas, catalysts, batteries, lubricants, are presented. The book also includes the modeling of oxide and carbon based nanomaterials. The book covers the topics: Synthesis, characterization and application of carbon nanotubes, carbon nanofibres, fullerenes Synthesis, characterization and application of oxide based nanomaterials. Nanostructured magnetic and electric materials and their applications. Nanostructured materials for petro-chemical industry. Oxide and carbon based thin films for electronics and sustainable energy. Theory, calculations and modeling of nanostructured materials.
Download or read book Flow Chemistry written by Santiago V Luis and published by Royal Society of Chemistry. This book was released on 2019-10-18 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: In flow chemistry reactions are performed in a reactor with the reactants pumped through it. It has the benefit of being easily scaled up and it is straightforward to integrate synthesis, workup and analysis into one system. This volume provides an update on recent advances in the field of flow chemistry, with special emphasis on new, integrated approaches for green and efficient chemistry. This book is a valuable resource for researchers in green chemistry, chemical engineers and Industrial chemists working in the pharmaceutical and fine chemicals industries.
Download or read book Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles written by Aidin Lak and published by . This book was released on 2013 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Oxides and Composites II written by Rajshree B. Jotania and published by Materials Research Forum LLC. This book was released on 2020-10-15 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic oxides have highly interesting applications in the fields of permanent magnets, microwave devices, magnetic refrigeration, sensors, catalysis, and the health sector. This book focuses on the synthesis, characterization, and applications of various perovskites, garnets, manganites, carbon-based metal oxide nanocomposites, nanoferrites, and graphene-metal oxide nanocomposites. Keywords: Magnetic Oxides, Permanent Magnets, Microwave Devices, Magnetic Refrigeration, Sensors, Catalysis, Perovskites, Nanoferrites, Manganites, Rare Earth Iron Garnet, Graphene-Metal Oxide Nanocomposites, Carbon Nanomaterials, Mesoporous Materials, Nanocatalysts, Multifunctional Ferrites, Magnetocaloric Effect, Biosynthesis, Photo Catalysis, Antibacterial Activity, High Density Recording Media.
Download or read book Magnetic Nanomaterials written by Yanglong Hou and published by John Wiley & Sons. This book was released on 2017-10-23 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely and comprehensive, this book presents recent advances in magnetic nanomaterials research, covering the latest developments, including the design and preparation of magnetic nanoparticles, their physical and chemical properties as well as their applications in different fields, including biomedicine, magnetic energy storage, wave-absorbing and water remediation. By allowing researchers to get to the forefront developments related to magnetic nanomaterials in various disciplines, this is invaluable reading for the nano, magnetic, energy, medical, and environmental communities.
Download or read book Iron Nanomaterials for Water and Soil Treatment written by Marta I. Litter and published by CRC Press. This book was released on 2018-09-03 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has a great potential for providing efficient, cost-effective, and environmentally acceptable solutions to face the increasing requirements on quality and quantity of fresh water for industrial, agricultural, or human use. Iron nanomaterials, either zerovalent iron (nZVI) or iron oxides (nFeOx), present key physicochemical properties that make them particularly attractive as contaminant removal agents for water and soil cleaning. The large surface area of these nanoparticles imparts high sorption capacity to them, along with the ability to be functionalized for the enhancement of their affinity and selectivity. However, one of the most important properties is the outstanding capacity to act as redox-active materials, transforming the pollutants to less noxious chemical species by either oxidation or reduction, such as reduction of Cr(VI) to Cr(III) and dehalogenation of hydrocarbons. This book focuses on the methods of preparation of iron nanomaterials that can carry out contaminant removal processes and the use of these nanoparticles for cleaning waters and soils. It carefully explains the different aspects of the synthesis and characterization of iron nanoparticles and methods to evaluate their ability to remove contaminants, along with practical deployment. It overviews the advantages and disadvantages of using iron-based nanomaterials and presents a vision for the future of this nanotechnology. While this is an easy-to-understand book for beginners, it provides the latest updates to experts of this field. It also opens a multidisciplinary scope for engineers, scientists, and undergraduate and postgraduate students. Although there are a number of books published on the subject of nanomaterials, not too many of them are especially devoted to iron materials, which are rather of low cost, are nontoxic, and can be prepared easily and envisaged to be used in a large variety of applications. The literature has scarce reviews on preparation of iron nanoparticles from natural sources and lacks emphasis on the different processes, such as adsorption, redox pathways, and ionic exchange, taking place in the removal of different pollutants. Reports and mechanisms on soil treatment are not commonly found in the literature. This book opens a multidisciplinary scope for engineers and scientists and also for undergraduate or postgraduate students.
Download or read book Magnetic Characterization Techniques for Nanomaterials written by Challa S.S.R. Kumar and published by Springer. This book was released on 2017-04-24 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sixth volume of a 40 volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Magnetic Characterization Techniques for Nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
