Download or read book Synthesis and Technological Processing of Hybrid Organic inorganic Materials for Photonic Applications written by Pélagie Declerck and published by . This book was released on 2011 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Organic inorganic Hybrid Materials for Solution processed Photonic Applications written by Andrew Strang and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optically Induced Nanostructures written by Karsten König and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-05-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructuring of materials is a task at the heart of many modern disciplines in mechanical engineering, as well as optics, electronics, and the life sciences. This book includes an introduction to the relevant nonlinear optical processes associated with very short laser pulses for the generation of structures far below the classical optical diffraction limit of about 200 nanometers as well as coverage of state-of-the-art technical and biomedical applications. These applications include silicon and glass wafer processing, production of nanowires, laser transfection and cell reprogramming, optical cleaning, surface treatments of implants, nanowires, 3D nanoprinting, STED lithography, friction modification, and integrated optics. The book highlights also the use of modern femtosecond laser microscopes and nanoscopes as novel nanoprocessing tools.

Download or read book Sol Gel Derived Optical and Photonic Materials written by Rui Almeida and published by Woodhead Publishing. This book was released on 2020-11-25 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-gel processing is a low temperature, low cost wet chemistry route to a range of different materials, particularly glassy and ceramic oxides, including nanoparticles and powders, fibers, thin films and membranes, or monoliths and composites. Thin films and coatings represent by far the most important category of sol-gel derived products with optical, electronic and magnetic functionalities, for example photoresist and dielectric spin-on-glass layers, flat screen displays, anti-reflection, conducting and magnetic disk coatings, as well as photochromic, electrochromic and photovoltaic coatings. Sol-gel derived materials are homogeneous at the molecular level and are a good example of a bottom-up approach to materials synthesis. There is increasing need of new optical and photonic materials with improved performance, where molecular level homogeneity and easy fabrication in film form may be especially convenient, highlighting a decisive advantage of sol-gel over other more established technologies to obtain graded index optical components, solar control coatings, phosphors, glass ceramics or multilayer photonic structures. There is no book available yet which focuses in particular on optical and photonic sol-gel derived materials. This is what makes this book unique at this point for those especially or exclusively interested in optical and photonic functional materials and applications. This book represents an important tool to update scientists and engineers with recent advances in the rapidly evolving field of optical and photonic materials, components and devices. Our target audience are those working in materials science, physics, engineering and chemistry disciplines, in particular academics and researchers working in advanced optical/photonic processing technologies, research and development engineers in high technology industries and research project leaders. This book will also be an essential tool for graduate students pursuing a PhD or even a Master’s degree. Reviews wide range of sol-gel derived coatings including reflective and anti-reflective, self-cleaning, and electrochromic Discusses latest advances in sol-gel derived photonic crystals including one dimensional, two dimensional, and three dimensional structures Addresses key applications in solid state lighting, solar cells, sensors, fiber optics, and magneto-optical devices

Download or read book Hybrid Organic inorganic Materials for Novel Photonic Applications written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Sol Gel Science and Technology written by Lisa Klein and published by Springer Nature. This book was released on 2018-05-31 with total page 3755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and expanded second edition stands as a comprehensive knowledgebase on both the fundamentals and applications of this important materials processing method. The diverse, international team of contributing authors of this reference clarify in extensive detail properties and applications of sol-gel science and technology as it pertains to the production of substances, active and non-active, including optical, electronic, chemical, sensor, bio- and structural materials. Essential to a wide range of manufacturing industries, the compilation divides into the three complementary sections: Sol-Gel Processing, devoted to general aspects of processing and recently developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, and photocatalysts; Characterization of Sol-Gel Materials and Products, presenting contributions that highlight the notion that useful materials are only produced when characterization is tied to processing, such as determination of structure by NMR, in-situ characterization of the sol-gel reaction process, determination of microstructure of oxide gels, characterization of porous structure of gels by the surface measurements, and characterization of organic-inorganic hybrid; and Applications of Sol-Gel Technology, covering applications such as the sol-gel method used in processing of bulk silica glasses, bulk porous gels prepared by sol-gel method, application of sol-gel method to fabrication of glass and ceramic fibers, reflective and antireflective coating films, application of sol-gel method to formation of photocatalytic coating films, and application of sol-gel method to bioactive coating films. The comprehensive scope and integrated treatment of topics make this reference volume ideal for R&D scientists and engineers across a wide range of disciplines and professional interests.

Download or read book Materials Research to Meet 21st Century Defense Needs written by National Research Council and published by National Academies Press. This book was released on 2003-03-25 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the revolutionary new defense capabilities offered by materials science and engineering, innovative management to reduce the risks associated with translating research results will be needed along with the R&D. While payoff is expected to be high from the promising areas of materials research, many of the benefits are likely to be evolutionary. Nevertheless, failure to invest in more speculative areas of research could lead to undesired technological surprises. Basic research in physics, chemistry, biology, and materials science will provide the seeds for potentially revolutionary technologies later in the 21st century.

Download or read book Handbook of Sol Gel Science and Technology written by S. Sakka and published by Springer. This book was released on 2004-12-17 with total page 1968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of Handbook of Sol-Gel Science and Technology. The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, Sol-Gel Processing, is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Synthesis and reaction of sol-gel precursors, Preparation of bulk glass and ceramics, Processing of porous materials based on self-organization, Synthesis of organic-inorganic hybrid materials, Coating of plastics, Special processes used in sol-gel formation of materials (1. Non-hydrolytic sol-gel process, 2. Sonogels, and 3. UV irradiation). Volume 2, Characterization of Sol-Gel Materials and Products, highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Determination of structure by NMR, In-situ characterization of the sol-gel reaction process, Determination of microstructure of oxide gels, Characterization of porous structure of gels by the surface measurements, Characterization of organic-inorganic hybrid, Measurements of rheological properties, Measurements of functional properties: fluorescence, laser, non-linear optical and other properties. Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producing novel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. Volume 3, Applications of Sol-Gel Technology, will cover applications such as: Application of sol-gel method to processing of bulk silica glasses, Bulk porous gels prepared by sol-gel method, Application of sol-gel method to fabrication of glass and ceramic fibers, Reflective and antireflective coating films, Planar waveguides prepared by sol-gel method, Films with micropatterns and two-dimensional photonic crystals, Application of sol-gel method to formation of ferroelectric films, Application of sol-gel method to formation of photocatalytic coating films, Application of sol-gel method to bioactive coating films.

Download or read book Handbook of sol gel science and technology 3 Applications of sol gel technology written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:

Download or read book Hybrid Nanocomposites for Nanotechnology written by Lhadi Merhari and published by Springer Science & Business Media. This book was released on 2009-03-03 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances in polymer-inorganic nanocomposites, with particular focus on high-added-value applications in fields including electronics, optics, magnetism and biotechnology. The unique focus of this book is on electronic, optical, magnetic and biomedical applications of hybrid nanocomposites. Coverage includes: Synthesis methods and issues and production scale-up; Characterization methods; Electronic applications; Optical applications and Photonics; Magnetic applications; and Biomedical applications. The book offers readers a solid grasp of the state of the art, and of current challenges in non-traditional applications of hybrid nanocomposites.

Download or read book Multiphoton Lithography written by Jürgen Stampfl and published by John Wiley & Sons. This book was released on 2016-09-12 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this fascinating, interdisciplinary topic meets the much-felt need for an up-to-date overview of the field. Written with both beginners and professionals in mind, this ready reference begins with an introductory section explaining the basics of the various multi-photon and photochemical processes together with a description of the equipment needed. A team of leading international experts provides the latest research results on such materials as new photoinitiators, hybrid photopolymers, and metallic carbon nanotube composites. They also cover promising applications and prospective trends, including photonic crystals, microfluidic devices, biological scaffolds, metamaterials, waveguides, and functionalized hydrogels. By bringing together the essentials for both industrial and academic researchers, this is an invaluable companion for materials scientists, polymer chemists, surface chemists, surface physicists, biophysicists, and medical scientists working with 3D micro- and nanostructures.

Download or read book Hybrid Organic Inorganic Interfaces written by Marie Helene Delville and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid organic-inorganic materials and the rational design of their interfaces open up the access to a wide spectrum of functionalities not achievable with traditional concepts of materials science. This innovative class of materials has a major impact in many application domains such as optics, electronics, mechanics, energy storage and conversion, protective coatings, catalysis, sensing and nanomedicine. The properties of these materials do not only depend on the chemical structure, and the mutual interaction between their nano-scale building blocks, but are also strongly influenced by the interfaces they share. This handbook focuses on the most recent investigations concerning the design, control, and dynamics of hybrid organic-inorganic interfaces, covering: (i) characterization methods of interfaces, (ii) innovative computational approaches and simulation of interaction processes, (iii) in-situ studies of dynamic aspects controlling the formation of these interfaces, and (iv) the role of the interface for process optimization, devices, and applications in such areas as optics, electronics, energy and medicine.

Download or read book Handbook of Greener Synthesis of Nanomaterials and Compounds written by Boris I. Kharisov and published by Elsevier. This book was released on 2021-04-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern techniques to produce nanoparticles, nanomaterials, and nanocomposites are based on approaches that frequently involve high costs, inefficiencies, and negative environmental impacts. As such, there has been a real drive to develop and apply approaches that are more efficient and benign. The Handbook of Greener Synthesis of Nanomaterials and Compounds provides a comprehensive review of developments in this field, combining foundational green and nano-chemistry with the key information researchers need to assess, select and apply the most appropriate green synthesis approaches to their own work. Volume 1: Fundamental Principles and Methods provides a clear introduction to the fundamentals of green synthesis that places synthesis in the context of green chemistry. Beginning with a discussion of key greener physical and chemical methods for synthesis, including ultrasound, microwave and mechanochemistry methods, the book goes on to explore biological methods, including biosynthesis, green nanoformation, and virus-assisted methods. Discusses synthesis in the context of the principles of green chemistry Highlights both traditional and innovative technologies for the synthesis of nanomaterials and related composites under green chemistry conditions Reflects on the current and potential applications of natural products chemistry in synthesis

Download or read book Photonics Applications in Astronomy Communications Industry and High energy Physics Experiments written by Ryszard S. Romaniuk and published by SPIE-International Society for Optical Engineering. This book was released on 2003 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of sol gel science and technology 1 Sol gel processing written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:

Download or read book Hybrid Organic Inorganic Perovskites written by Li Wei and published by John Wiley & Sons. This book was released on 2020-10-19 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid organic-inorganic perovskites (HOIPs) have attracted substantial interest due to their chemical variability, structural diversity and favorable physical properties the past decade. This materials class encompasses other important families such as formates, azides, dicyanamides, cyanides and dicyanometallates. The book summarizes the chemical variability and structural diversity of all known hybrid organic-inorganic perovskites subclasses including halides, azides, formates, dicyanamides, cyanides and dicyanometallates. It also presents a comprehensive account of their intriguing physical properties, including photovoltaic, optoelectronic, dielectric, magnetic, ferroelectric, ferroelastic and multiferroic properties. Moreover, the current challenges and future opportunities in this exciting field are also been discussed. This timely book shows the readers a complete landscape of hybrid organic-inorganic pervoskites and associated multifuctionalities.

Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.