Download or read book Synthesis and Properties of Silicones and Silicone Modified Materials written by Stephen J. Clarson and published by American Chemical Society. This book was released on 2003 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis and Properties of Silicones and Silicone-Modified Materials includes sections on synthesis, characterization, elastomers and reinforcement, surfaces and interfaces, copolymers, and reinforcing fillers. Synthesis and Properties of Silicones and Silicone-Modified Materials reviews recent academic and technological developments behind silicones and silicone-modified materials.
Download or read book Silicon Containing Polymers written by Richard G Jones and published by Royal Society of Chemistry. This book was released on 2023-09-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-containing Polymers reflects the growing interest worldwide in this developing field. Silicon polymers are now finding use as moulding materials, rubbers, ceramic precursors, in lithography and reprography as photosensitive materials, as conducting polymers, and in a host of other applications. This book presents up-to-date research from all over the world. It brings together research from the forefront of a multidisciplinary subject, covering the synthesis, modification, characterization, properties and applications of polysiloxanes, polysilylenes, polysilazanes and organosilicate derivatives. Silicon-containing Polymers will be of interest to researchers and postgraduates in any area of materials science, as well as some areas of inorganic chemistry.
Download or read book Silicon Based Polymers written by François Ganachaud and published by Springer Science & Business Media. This book was released on 2008-08-09 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Based Polymers presents highlights in advanced research and technological innovations using macromolecular organosilicon compounds and systems, as presented in the 2007 ISPO congress. Silicon-containing materials and polymers are used all over the world and in a variety of industries, domestic products and high technology applications. Among them, silicones are certainly the most well–known, however there are still new properties discovered and preparative processes developed all the time, therefore adding to their potential. Less known, but in preparation for the future, are other silicon containing-polymers which are now close to maturity and in fact some are already available like polysilsesquioxanes and polysilanes. All these silicon based materials can adopt very different structures like chains, dendrimers, hyperbranched and networks, physical and chemical gels. The result is a vast array of materials with applications in various areas such as optics, electronics, ionic electrolytes, liquid crystals, biomaterials, ceramics and concrete, paints and coatings ... all needed to face the environmental, energetical and technological issues of today. Some industrial aspects of the applications of these materials will also be presented.
Download or read book Functionalized Polymers written by Narendra Pal Singh Chauhan and published by CRC Press. This book was released on 2021-05-14 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized polymers are macromolecules to which chemically bound functional groups are attached which can be used as catalysts, reagents, protective groups, etc. Functionalized polymers have low cost, ease of processing and attractive features for functional organic molecules. Chemical reactions for the introduction of functional groups in polymers and the conversion of functional groups in polymers depend on different properties. Such properties are of great importance for functionalization reactions for possible applications of reactive polymers. This book deals with the synthesis and design of various functional polymers, the modification of preformed polymer backbones and their various applications.
Download or read book Silicon Based Polymers and Materials written by Jerzy J. Chruściel and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon based materials and polymers are made of silicon containing polymers, mainly macromolecular siloxanes (silicones). This book covers the different kinds of siliconbased polymers: silicones, silsesquioxanes (POSS), and silicon-based copolymers. Other silicon containig polymers: polycarbosilanes, polysilazanes, siloxane-organic copolymers, silicon derived high-tech ceramics: silicon carbide and oxycarbide, silicon nitride, etc. have also a very important practical meaning and a hudge number of practical applications. These materials make up products in a variety of industries and products, including technical and medical applicatons. Polycrystalline silicon is the basic material for large scale photovoltaic (PV) applications as solar cells. Technical applications of crystalline (c-Si) and amorphous (a-Si) silicon (fully inorganic materials), silicon nanowires are still quickly growing, especially in the fi eld of microelectronics, optoelectronics, photonics. and photovoltaics, catalysts, and different electronic devices (e.g. sensors, thermoelectric devices). This book is ideal for researchers and as such covers the industrial perspective of using each class of silicon based materials. Discusses silanes, silane coupling agents (SCA), silica, silicates, silane modified fillers, silsesquioxanes, silicones, and other silicon polymers and copolymers for practical applications as polymeric materials and very useful ingredients in materials science.
Download or read book Silicon Based Hybrid Nanoparticles written by Sabu Thomas and published by Elsevier. This book was released on 2021-09-24 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-Based Hybrid Nanoparticles: Fundamentals, Properties, and Applications focuses on the fundamental principles and promising applications of silicon-based hybrid nanoparticles in nanoelectronics, energy storage/conversion, catalysis, sensors, biomedicine, environment and imaging. This book is an important reference source for materials scientists and engineers who are seeking to understand more about the major properties and applications of silicon-based hybrid nanoparticles. As the hybridization of silicon nanoparticles with other semiconductors or metal oxides nanoparticles may exhibit superior features, when compared to lone, individual nanoparticles, this book provides the latest insights. In addition, the silicon/iron oxide hybrid nanoparticles also possess excellent fluorescence, super-paramagnetism, and biocompatibility that can be effectively used for the diagnostic imaging system in vivo. Similarly, gold-silicon nanohybrids could be used as highly efficient near-infrared hyperthermia agents for cancer cell destruction. - Outlines the major thermal, electrical, optical, magnetic and toxic properties of silicon-based hybrid nanoparticles - Describes major applications in energy, environmental science and catalysis - Assesses the major challenges to manufacturing silicon-based nanostructured materials on an industrial scale
Download or read book Polyhedral Oligomeric Silsesquioxane POSS Polymer Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2021-03-25 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites: From Synthesis to Applications offers extensive coverage of polyhedral oligomeric silsesquioxanes and their nanocomposites, including their synthesis, characterization, interfacial interactions and advanced applications. Sections introduce essentials, information on their preparation and discussions on polymeric materials, including elastomers, thermoplastics, thermosetting polymers, polymer blends and IPNs. Further sections cover the latest analysis techniques, examine the properties of POSS-polymer nanocomposites, and discuss key application areas, such as biological, energy, defense, and space. Finally, issues surrounding industry implementation and lifecycle are explored. This is a valuable reference for researchers, scientists and advanced students in the areas of polymer composites and nanocomposites, polymer chemistry, polymer physics, polymer science, and materials science and engineering. In an industrial setting, this book will be of great interest to scientists, R&D professionals, and engineers across industries and disciplines. - Covers all aspects of polyhedral oligomeric silsesquioxanes (POSS) and their nanocomposites, including synthesis and characterization techniques, properties, analysis, applications and trends - Targets POSS nanocomposites, describing synthesis, characterization and the selection of POSS filler types according to polymeric material - Explains the preparation and utilization of POSS polymer nanocomposites for cutting-edge applications, including biological, energy, and defense field applications
Download or read book Self Healing Polymers written by Wolfgang H. Binder and published by John Wiley & Sons. This book was released on 2013-03-29 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing is a well-known phenomenon in nature: a broken bone merges after some time and if skin is damaged, the wound will stop bleeding and heals again. This concept can be mimicked in order to create polymeric materials with the ability to regenerate after they have suffered degradation or wear. Already realized applications are used in aerospace engineering, and current research in this fascinating field shows how different self-healing mechanisms proven successful by nature can be adapted to produce even more versatile materials. The book combines the knowledge of an international panel of experts in the field and provides the reader with chemical and physical concepts for self-healing polymers, including aspects of biomimetic processes of healing in nature. It shows how to design self-healing polymers and explains the dynamics in these systems. Different self-healing concepts such as encapsulated systems and supramolecular systems are detailed. Chapters on analysis and friction detection in self-healing polymers and on applications round off the book.
Download or read book Advances in Chemical Sensors written by Wen Wang and published by BoD – Books on Demand. This book was released on 2012-01-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical sensor plays an essential role in the fields of environmental conservation and monitoring, disaster and disease prevention, and industrial analysis. A typical chemical sensor is a device that transforms chemical information in a selective and reversible way, ranging from the concentration of a specific sample component to total composition analysis, into an analytically useful signal. Much research work has been performed to achieve a chemical sensor with such excellent qualities as quick response, low cost, small size, superior sensitivity, good reversibility and selectivity, and excellent detection limit. This book introduces the latest advances on chemical sensors. It consists of 15 chapters composed by the researchers active in the field of chemical sensors, and is divided into 5 sections according to the classification following the principles of signal transducer. This collection of up-to-date information and the latest research progress on chemical sensor will provide valuable references and learning materials for all those working in the field of chemical sensors.
Download or read book Aqueous Polymer Dispersions written by Klaus Tauer and published by Springer. This book was released on 2014-01-15 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The incessantly interest in aqueous polymer dispersions (APD) since more than 90 years can be related to the almost unlimited possibilities to tailor APD to specific needs. These proceedings from an international symposium on "Polymer Colloids: Preparation & Properties of Aqueous Polymer Dispersions" held at the Swabian Conference Center (Kloster Irsee, Germany) witness this statement. The 33 contributions cover important aspects of APD such as control of particle size and stabilization, different polymerization technologies, applications as binders, paints, or as supports for proteins and hence, span the whole range from academic to practical.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Single Chain Polymer Nanoparticles written by José A. Pomposo and published by John Wiley & Sons. This book was released on 2017-08-18 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.
Download or read book Silicon Chemistry written by Peter Jutzi and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined results from an international research project involving 40 interdisciplinary groups, providing the latest knowledge from the past few years. Adopting an application-oriented approach, this handy reference is a must-have for every silicon chemist, whether working in inorganic, organic, physical or polymer chemistry, materials science or physics.
Download or read book Polymer Coatings written by Gijsbertus de With and published by John Wiley & Sons. This book was released on 2018-10-22 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to polymer coatings that covers all aspects from materials to applications Polymer Coatings is a practical resource that offers an overview of the fundamentals to the synthesis, characterization, deposition methods, and recent developments of polymer coatings. The text includes information about the different polymers and polymer networks in use, resins for solvent- and water-based coatings, and a variety of additives. It presents deposition methods that encompass frequently used mechanical and electrochemical approaches, in addition to the physical-chemical aspects of the coating process. The author covers the available characterization methods including spectroscopic, morphological, thermal and mechanical techniques. The comprehensive text also reviews developments in selected technology areas such as electrically conductive, anti-fouling, and self-replenishing coatings. The author includes insight into the present status of the research field, describes systems currently under investigation, and draws our attention to yet to be explored systems. This important text: • Offers a thorough overview of polymer coatings and their applications • Covers different classes of materials, deposition methods, coating processes, and ways of characterization • Contains a text that is designed to be accessible and helps to apply the acquired knowledge immediately • Includes information on selected areas of research with imminent application potential for functional coatings Written for chemists in industry, materials scientists, polymer chemists, and physical chemists, Polymer Coatings offers a text that contains the information needed to gain an understanding of the charaterization and applications of polymer coatings.
Download or read book Silicon Polymers written by Aziz M. Muzafarov and published by Springer Science & Business Media. This book was released on 2010-09-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Synthetic and Application Aspects of Polysilanes: An Underestimated Class of Materials?, by A. Feigl, A. Bockholt, J. Weis, and B. Rieger; * Conjugated Organosilicon Materials for Organic Electronics and Photonics, by Sergei A. Ponomarenko and Stephan Kirchmeyer; * Polycarbosilanes Based on Silicon-Carbon Cyclic Monomers, by E.Sh. Finkelshtein, N.V. Ushakov, and M.L. Gringolts; * New Synthetic Strategies for Structured Silicones Using B(C6F5)3, by Michael A. Brook, John B. Grande, and François Ganachaud; * Polyhedral Oligomeric Silsesquioxanes with Controlled Structure: Formation and Application in New Si-Based Polymer Systems, by Yusuke Kawakami, Yuriko Kakihana, Akio Miyazato, Seiji Tateyama, and Md. Asadul Hoque;
Download or read book Silicon Based Polymers and Materials written by Jerzy J. Chruściel and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon based materials and polymers are made of silicon containing polymers, mainly macromolecular siloxanes (silicones). This book covers the different kinds of siliconbased polymers: silicones, silsesquioxanes (POSS), and silicon-based copolymers. Other silicon containig polymers: polycarbosilanes, polysilazanes, siloxane-organic copolymers, silicon derived high-tech ceramics: silicon carbide and oxycarbide, silicon nitride, etc. have also a very important practical meaning and a hudge number of practical applications. These materials make up products in a variety of industries and products, including technical and medical applicatons. Polycrystalline silicon is the basic material for large scale photovoltaic (PV) applications as solar cells. Technical applications of crystalline (c-Si) and amorphous (a-Si) silicon (fully inorganic materials), silicon nanowires are still quickly growing, especially in the fi eld of microelectronics, optoelectronics, photonics. and photovoltaics, catalysts, and different electronic devices (e.g. sensors, thermoelectric devices). This book is ideal for researchers and as such covers the industrial perspective of using each class of silicon based materials. Discusses silanes, silane coupling agents (SCA), silica, silicates, silane modified fillers, silsesquioxanes, silicones, and other silicon polymers and copolymers for practical applications as polymeric materials and very useful ingredients in materials science.
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
