Download or read book Synthesis and Analysis Methods for Safety and Reliability Studies written by G. Apostolakis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originates from the NATO Advanced Study Institute on Synthesis and Analysis Methods for Safety and Reliability Studies held at Sogesta Conference Centre, Urbino, Italy, 3-14 July 1978. The Institute, co-directed by Prof. E.J. Henley and Dr. G. Volta, was attended by 67 persons from twelve countries. The focus of the Institute was on theoretical and applied aspects of reliability and risk analysis methodologies. The Institute was composed of lectures, workshops and gu~ded discussions. From the large quantity of written material that was used and produced during the Institute, a number of papers introducing the most relevant research results and trends in the field have been selected. The papers have been edited, partly rewritten and rearranged in order to obtain in the end an integrat ed exposition of methods and techniques for reliability analysis and computation of complex systems. The book is divided into four sections which correspond to fairly homogeneous areas from a methodological point of view. Each section is preceded by an introduction prepared by the Editors which aims at helping the readers to put in perspective and appre ciate the contribution of each paper to the subject of the section.
Download or read book Synthesis and Analysis Methods for Safety and Reliability Studies written by NATO Advanced Study Institute on Synthesis and Analysis and published by . This book was released on with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management written by and published by . This book was released on 1978 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Safety written by and published by . This book was released on 1981 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1981 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.
Download or read book Reliability Analysis and Prediction written by K.B. Misra and published by Elsevier. This book was released on 2012-12-02 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book equips the reader with a compact information source on all the most recent methodological tools available in the area of reliability prediction and analysis. Topics covered include reliability mathematics, organisation and analysis of data, reliability modelling and system reliability evaluation techniques. Environmental factors and stresses are taken into account in computing the reliability of the involved components. The limitations of models, methods, procedures, algorithms and programmes are outlined. The treatment of maintained systems is designed to aid the worker in analysing systems with more realistic and practical assumptions. Fault tree analysis is also extensively discussed, incorporating recent developments. Examples and illustrations support the reader in the solving of problems in his own area of research. The chapters provide a logical and graded presentation of the subject matter bearing in mind the difficulties of a beginner, whilst bridging the information gap for the more experienced reader. The work will be of considerable interest to engineers working in various industries, research organizations, particularly in defence, nuclear, chemical, space or communications. It will also be an indispensable study aid for serious-minded students and teachers.
Download or read book Fault Tree Analysis written by and published by . This book was released on 2000 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains references to documents in the NASA Scientific and Technical Information (STI) Database.
Download or read book Automation and Human Performance written by Raja Parasuraman and published by Routledge. This book was released on 2018-01-29 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is perhaps no facet of modern society where the influence of computer automation has not been felt. Flight management systems for pilots, diagnostic and surgical aids for physicians, navigational displays for drivers, and decision-aiding systems for air-traffic controllers, represent only a few of the numerous domains in which powerful new automation technologies have been introduced. The benefits that have been reaped from this technological revolution have been many. At the same time, automation has not always worked as planned by designers, and many problems have arisen--from minor inefficiencies of operation to large-scale, catastrophic accidents. Understanding how humans interact with automation is vital for the successful design of new automated systems that are both safe and efficient. The influence of automation technology on human performance has often been investigated in a fragmentary, isolated manner, with investigators conducting disconnected studies in different domains. There has been little contact between these endeavors, although principles gleaned from one domain may have implications for another. Also, with a few exceptions, the research has tended to be empirical and only theory-driven. In recent years, however, various groups of investigators have begun to examine human performance in automated systems in general and to develop theories of human interaction with automation technology. This book presents the current theories and assesses the impact of automation on different aspects of human performance. Both basic and applied research is presented to highlight the general principles of human-computer interaction in several domains where automation technologies are widely implemented. The major premise is that a broad-based, theory-driven approach will have significant implications for the effective design of both current and future automation technologies. This volume will be of considerable value to researchers in human
Download or read book Reliability Problems General Principles and Applications in Mechanics of Solids and Structures written by F. Casciati and published by Springer. This book was released on 2014-05-04 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this volume is to present to researchers and engineers working on problems concerned with the mechanics of solids and structures, the current state of the development and application to procedures for assessing the reliability of a system. Particular attention is paid to their use in the analysis of complex engineering systems. The topics covered reflect the need to integrate, within the overall methodology, statistical methods for dealing with uncertain parameters and random excitation with the development of a suitable safety indexes and design codes. The basic principles of reliability theory, together with current standard methodology, including a consideration of the operational, economic and legal aspects of reliability assurance, is reviewed, together with an introduction to new developments, such as the application of expert systems technology. Damage accumulation predictions, with applications in seismic engineering are also covered.
Download or read book Aspects of Structural Reliability written by Michael H. Faber and published by Herbert Utz Verlag. This book was released on 2007 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi state System Reliability written by Anatoly Lisnianski and published by World Scientific. This book was released on 2003 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to be devoted to multi-state system (MSS) reliability analysis and optimization. It contains a brief historical overview, presents the basic concepts of MSS, defines MSS reliability measures and systematically describes the tools for MSS reliability assessment and optimization. It offers a comprehensive, up-to-date presentation of MSS reliability theory based on the modern advantages in this field and provides a theoretical summary and examples of engineering applications to a variety of technical problems. The book is primarily addressed to practising reliability engineers and researchers with an interest in reliability and performability analysis. It can also be used as a textbook for senior undergraduate or graduate courses in several fields: industrial engineering, electrical engineering, mechanical engineering and applied mathematics.
Download or read book Fault Trees written by Nikolaos Limnios and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault tree analysis is an important technique in determining the safety and dependability of complex systems. Fault trees are used as a major tool in the study of system safety as well as in reliability and availability studies. The basic methods – construction, logical analysis, probability evaluation and influence study – are described in this book. The following extensions of fault trees, non-coherent fault trees, fault trees with delay and multi-performance fault trees, are also explained. Traditional algorithms for fault tree analysis are presented, as well as more recent algorithms based on binary decision diagrams (BDD).
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book The Acquisition of Knowledge and Skills for Taskwork and Teamwork to Control Complex Technical Systems written by Annette Kluge and published by Springer. This book was released on 2014-05-05 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first comprehensive literature review on the acquisition and retention of complex skills in High Reliability Organizations. Based on this review, it introduces a theoretical model of how skill and knowledge acquisition for complex tasks is accomplished and shows how this model can be used to derive training methods and instructional techniques. Successful acquisition and retention of complex technical skills within High Reliability Organizations requires a full understanding of the learning process, knowledge structure, and skill requirements associated with the effective operation and management of technology. For researchers and for organizations, the understanding of these processes is vital for designing training programs as well as for reducing errors with severe consequences for human lives and the environment. Until now, only theoretical fragments exist on this topic, and only a very limited number of publications actually address complex tasks in vocational/occupational settings. “The Acquisition of Knowledge and Skills for Task Work and Teamwork to Control Complex Technical Systems ” uses its literature overview and theoretical model to formulate training principles, that can be used to develop training experiments for further empirical investigations as well as training methods for applied organizational contexts.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
