Download or read book Synchronous data acquisition with wireless sensor networks written by Funck, Jürgen Helmut and published by Universitätsverlag der TU Berlin. This book was released on 2018-07-19 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensor networks (WSN) are predicted to play a key role in future technological developments like the internet of things. Already they are beginning to be used in many applications not only in the scientific and industrial domains. One of the biggest challenges, when using WSN, is to fuse and evaluate data from different sensor nodes. Synchronizing the data acquisition of the nodes is a key enabling factor for this. So far research has been focused on synchronizing the clocks of the nodes, largely neglecting the implications for the actual measurement results. This thesis investigates the relation between synchronization accuracy and quality of measurement results. Two different classes of time synchronous data acquisition are investigated: event detection and waveform sampling. A model is developed that describes a WSN as a generic multi-channel data acquisition system, thus enabling direct comparison to other existing systems. With the help of this model it is shown, that synchronization accuracy should best be expressed as uncertainty of the acquired timing information. This way, not only the contribution of the synchronization to the overall measurement uncertainty can be assessed, but also the synchronization accuracy required for an application can be estimated. The insights from the uncertainty analysis are used to develop two distinct approaches to synchronous data acquisition: a proactive and a reactive one. It is shown that the reactive approach can also be used to efficiently implement synchronous angular sampling, i.e. data acquisition synchronous to the rotation of a machine's shaft. Furthermore, testing methods are suggested, that evaluate the synchronized data acquisition of an existing WSN as a whole. These methods can be applied to other data acquisition systems without changes, thus enabling direct comparisons. The practical realization of a WSN is described, on which the developed data acquisition methods have been implemented. All implementations were thoroughly tested in experiments, using the suggested testing methods. This way it was revealed, that a system's interrupt handling procedures may have a strong influence on the data acquisition. Furthermore, it was shown that the effective use of fixed-point arithmetic enables synchronous angular sampling in real-time during a streaming measurement. Finally, two application examples are used to illustrate the utility of the implemented data acquisition: the acoustic localization of two sensor nodes on a straight line and a simple order tracking at an induction motor test bench. Diese Dissertation untersucht die Zusammenhänge zwischen Synchronisationsgenauigkeit und Qualität der Messergebnisse. Zwei Klassen von zeitsynchroner Datenerfassung werden dabei betrachtet: die Detektion von Ereignissen und die Aufnahme von Kurvenformen. Es wird ein Modell entwickelt, welches ein WSN als ein allgemeines mehrkanaliges Datenerfassungssystem beschreibt. Dies ermöglicht den direkten Vergleich zwischen WSN und anderen Messsystemen. Weiter wird mit Hilfe des Modells gezeigt, dass die Synchronisationsgenauigkeit vorzugsweise als Unsicherheit der Zeitinformation angegeben werden sollte. Hierdurch kann nicht nur der Beitrag der Synchronisation zur gesamten Messunsicherheit bestimmt sondern auch die von einer Anwendung tatsächlich benötigte Synchronisationsgenauigkeit abgeschätzt werden. Ausgehend von den durch die Unsicherheitsbetrachtung gewonnenen Erkenntnissen werden ein proaktiver und ein reaktiver Ansatz zur synchronen Datenaufnahme entwickelt. Mit dem reaktiven Ansatz können Messdaten auch effizient drehwinkelsynchron, d. h. synchron zur Drehbewegung einer Maschinenwelle, aufgenommen werden. Es werden Testverfahren vorgeschlagen, mit denen sich die Synchronizität der Datenerfassung für ein WSN als Ganzes überprüfen lässt. Diese Verfahren lassen sich unverändert auf andere Messsysteme anwenden und ermöglichen somit direkte Vergleiche. Es wird die praktische Umsetzung eines WSN beschrieben, auf dem die entwickelten Methoden zur Datenerfassung implementiert wurden. Alle Implementierungen wurden mit den vorgeschlagenen Testverfahren untersucht. Hierdurch konnte gezeigt werden, dass die Interrupt-Bearbeitung der Sensorknoten entscheidenden Einfluss auf die Messdatenerfassung hat. Weiter konnte durch den Einsatz von Fixed-Punkt-Arithmetik die drehwinkelsynchrone Datenerfassung in Echtzeit realisiert werden. Schließlich wird die Nützlichkeit der implementierten Datenerfassung an zwei Anwendungen gezeigt: der akustischen Ortung zweier Sensorknoten sowie einer einfachen Ordnungsanalyse.

Download or read book Synchronous Data Acquisition with Wireless Sensor Networks written by Jürgen Helmut Funck and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bio inspired computation and its applications written by Tinggui Chen and published by Frontiers Media SA. This book was released on 2023-07-06 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Wireless Sensor Networks written by Yen Kheng Tan and published by IntechOpen. This book was released on 2010-12-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent development of communication and sensor technology results in the growth of a new attractive and challenging area - wireless sensor networks (WSNs). A wireless sensor network which consists of a large number of sensor nodes is deployed in environmental fields to serve various applications. Facilitated with the ability of wireless communication and intelligent computation, these nodes become smart sensors which do not only perceive ambient physical parameters but also be able to process information, cooperate with each other and self-organize into the network. These new features assist the sensor nodes as well as the network to operate more efficiently in terms of both data acquisition and energy consumption. Special purposes of the applications require design and operation of WSNs different from conventional networks such as the internet. The network design must take into account of the objectives of specific applications. The nature of deployed environment must be considered. The limited of sensor nodes resources such as memory, computational ability, communication bandwidth and energy source are the challenges in network design. A smart wireless sensor network must be able to deal with these constraints as well as to guarantee the connectivity, coverage, reliability and security of network's operation for a maximized lifetime. This book discusses various aspects of designing such smart wireless sensor networks. Main topics includes: design methodologies, network protocols and algorithms, quality of service management, coverage optimization, time synchronization and security techniques for sensor networks.

Download or read book Intelligent Manufacturing written by Chao'an Lai and published by Springer Nature. This book was released on 2022-03-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces intelligent manufacturing system planning, design, and implementation, through the deep integration of the Internet, big data, artificial intelligence, and manufacturing process, to promote the transformation and upgrading of enterprises. This book shows the implementation of intelligent manufacturing process with 12 benchmarking enterprises, discusses the planning, implementation, and control of intelligent manufacturing system technology and method of theory, and analyzes the five hierarchies of intelligent manufacturing system, the five stages of life cycle, and five kinds of intelligent depth. The content can cultivate the reader's vocational ability to develop intelligent solutions and implementation based on complex, uncertain environment needs. This book will be interesting and useful to a wide readership in the various fields of management, information science, and engineering science.

Download or read book Wireless Sensor Networks written by Gian Pietro Picco and published by Springer Science & Business Media. This book was released on 2012-01-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th European Conference on Wireless Sensor Networks, EWSN 2012, held in Trento, Italy, in Februar 2012. The 16 revised full papers presented were carefully reviewed and selected from 78 submissions. The papers are organized in topical sections on communication and security, system issues, reliability, localization and smart cameras, and hardware and sensing.

Download or read book Wireless Ad Hoc and Sensor Networks written by Jing (Selina) He and published by CRC Press. This book was released on 2013-08-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although wireless sensor networks (WSNs) have been employed across a range of applications, there are few books available that cover the required algorithms, performance analysis, and applications of network management techniques in WSNs. Filling this need, this book presents new network management techniques that can address many of the shortcomings of traditional techniques. It summarizes traditional and classical network management techniques as well as state-of-the-art methods.

Download or read book Issues in Structural and Materials Engineering 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 1922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Structural and Materials Engineering: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Structural and Materials Engineering. The editors have built Issues in Structural and Materials Engineering: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Structural and Materials Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Structural and Materials Engineering: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Wireless Sensor Networks written by Hossam Mahmoud Ahmad Fahmy and published by Springer Nature. This book was released on 2020-01-25 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second book by the author on WSNs focuses on the concepts of energy, and energy harvesting and management techniques. Definitions and terminologies are made clear without leaning on the relaxing assumption that they are already known or easily reachable, the reader is not to be diverted from the main course. Neatly drawn figures assist in viewing and imagining the offered topics. To make energy related topics felt and seen, the adopted technologies as well as their manufacturers are presented in details. With such a depth, this book is intended for a wide audience, it is meant to be helper and motivator, for the senior undergraduates, postgraduates, researchers, and practitioners; concepts and energy related applications are laid out, research and practical issues are backed by appropriate literature, and new trends are put under focus. For senior undergraduate students, it familiarizes with conceptual foundations and practical projects implementations. Also, it is intended for graduate students working on their thesis and in need of specific knowledge on WSNs and the related energy harvesting and management techniques. Moreover, it is targeting researchers and practitioners interested in features and applications of WSNs, and on the available energy harvesting and management projects and testbeds. Exercises at the end of each chapter are not just questions and answers; they are not limited to recapitulate ideas. Their design objective is not bound to be a methodical review of the provided concepts, but rather as a motivator for lot more of searching, finding, and comparing beyond what has been presented in the book.

Download or read book Data Acquisition written by Michele Vadursi and published by BoD – Books on Demand. This book was released on 2010-11-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended to be a collection of contributions providing a bird’s eye view of some relevant multidisciplinary applications of data acquisition. While assuming that the reader is familiar with the basics of sampling theory and analog-to-digital conversion, the attention is focused on applied research and industrial applications of data acquisition. Even in the few cases when theoretical issues are investigated, the goal is making the theory comprehensible to a wide, application- oriented, audience.

Download or read book Advanced Hybrid Information Processing written by Weina Fu and published by Springer Nature. This book was released on 2023-03-21 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set constitutes the post-conference proceedings of the 6th EAI International Conference on Advanced Hybrid Information Processing, ADHIP 2022, held in Changsha, China, in September 29-30, 2022. The 109 full papers presented were selected from 276 submissions and focus on theory and application of hybrid information processing technology for smarter and more effective research and application. The theme of ADHIP 2022 was Hybrid Information Processing in Meta World. The papers are named in topical sections as follows: Information Extracting and Processing in Digital World; Education Based methods in Learning and Teaching; Various Systems for Digital World.

Download or read book Reliable Wireless Sensor Network for Data Acquisition Masters Report written by Jared Gregory Wood and published by . This book was released on 2008 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synchronization in Wireless Sensor Networks written by Erchin Serpedin and published by Cambridge University Press. This book was released on 2009-07-30 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the key clock synchronization protocols, emphasizing design and optimization techniques for building efficient estimation schemes and performance benchmarks.

Download or read book Optimization of adaptive test design methods for the determination of steady state data driven models in terms of combustion engine calibration written by Sandmeier, Nino and published by Universitätsverlag der TU Berlin. This book was released on 2022-12-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the development of a model-based adaptive test design strategy with a focus on steady-state combustion engine calibration. The first research topic investigates the question how to handle limits in the input domain during an adaptive test design procedure. The second area of scope aims at identifying the test design method providing the best model quality improvement in terms of overall model prediction error. To consider restricted areas in the input domain, a convex hull-based solution involving a convex cone algorithm is developed, the outcome of which serves as a boundary model for a test point search. A solution is derived to enable the application of the boundary model to high-dimensional problems without calculating the exact convex hull and cones. Furthermore, different data-driven engine modeling methods are compared, resulting in the Gaussian process model as the most suitable one for a model-based calibration. To determine an appropriate test design method for a Gaussian process model application, two new strategies are developed and compared to state-of-the-art methods. A simulation-based study shows the most benefit applying a modified mutual information test design, followed by a newly developed relevance-based test design with less computational effort. The boundary model and the relevance-based test design are integrated into a multicriterial test design strategy that is tailored to match the requirements of combustion engine test bench measurements. A simulation-based study with seven and nine input parameters and four outputs each offered an average model quality improvement of 36 % and an average measured input area volume increase of 65 % compared to a non-adaptive space-filling test design. The multicriterial test design was applied to a test bench measurement with seven inputs for verification. Compared to a space-filling test design measurement, the improvement could be confirmed with an average model quality increase of 17 % over eight outputs and a 34 % larger measured input area. Diese Arbeit befasst sich mit der Entwicklung einer modellbasierten adaptiven Versuchsplanungsstrategie für die Anwendung in der Applikation des Stationärverhaltens von Verbrennungsmotoren. Der erste Forschungsteil untersucht, wie sich Grenzen im Eingangsraum in die Versuchsplanung eines adaptiven Prozesses einbinden lassen. Ein weiterer Fokus liegt auf der Identifikation einer modellbasierten Versuchsplanung, die eine bestmögliche Verbesserung der globalen Modellqualität hinsichtlich des Prädiktionsfehlers ermöglicht. Es wird ein Grenzraummodell auf Basis der konvexen Hülle unter Zuhilfenahme eines Algorithmus zur Bestimmung eines konvexen Konus entwickelt, das als Grundlage für eine Versuchsplanung in beschränkten Eingangsräumen verwendet wird. Um die Anwendbarkeit bei hochdimensionalen Problemstellungen zu gewährleisten, wird ein Verfahren vorgestellt, das eine Berechnung auch ohne die Bestimmung der exakten konvexen Hülle und konvexen Konen ermöglicht. Des Weiteren werden verschiedene Methoden zur datengetriebenen Modellbildung des Verbrennungsmotors verglichen, wobei das Gauß-Prozess Modell als die geeignetste Modellierungsmethode hervorgeht. Um die bestmögliche Versuchsplanungsmethode bei der Anwendung des Gauß-Prozess Modells zu ermitteln, werden zwei neue Strategien entwickelt und mit verfügbaren Methoden aus der Literatur verglichen. Eine simulationsbasierte Studie zeigt, dass eine angepasste Mutual Information Methode die besten Ergebnisse liefert. Ein neu entwickeltes relevanzbasiertes Verfahren erreicht die zweitbesten Ergebnisse, bietet aber einen geringeren Berechnungsaufwand als das Mutual Information Verfahren. Das Grenzmodell und das relevanzbasierte Verfahren werden in einem multikriteriellen Versuchsplanungsverfahren zusammengeführt, das an die Anforderungen von Messungen an einem Verbrennungsmotorenprüfstand angepasst ist. In einer simulationsbasierten Studie mit sieben bzw. neun Eingangsparametern und jeweils vier Ausgängen konnte eine durchschnittliche Modellqualitätsverbesserung von 36 % und eine mittlere Vergrößerung des vermessenen Eingangsraumvolumens von 65 % im Vergleich zu einer nichtadaptiven raumfüllenden Versuchsplanung gezeigt werden. Das multikriterielle Versuchsplanungsverfahren wurde anhand von Prüfstandsmessungen mit sieben Eingangsparametern verifiziert. Im Vergleich zu einer raumfüllenden Versuchsplanung konnte eine mittlere Modellqualitätsverbesserung über alle acht Ausgänge von 17 % und ein um 34 % vergrößertes vermessenes Eingangsraumvolumen erreicht werden, wodurch die Ergebnisse der Simulationen bestätigt werden konnten.

Download or read book Stereo vision based road condition monitoring written by Brunken, Hauke and published by Universitätsverlag der TU Berlin. This book was released on 2021-05-12 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: When planning road construction measures, it is essential to have up-to-date information on road conditions. If this information is not to be obtained manually, it is currently obtained using laser scanners mounted on mobile mapping vehicles, which can measure the 3D road profile. However, a large number of mobile mapping vehicles would be necessary to record an entire road network on a regular basis. Since 2D road damages can be found automatically on monocular camera images, the idea was born to use a stereo camera system to capture the 3D profile of roads. With stereo camera systems, it would be possible to equip a large number of vehicles and regularly collect data from large road networks. In this thesis, the potential applications of a stereo camera system for measuring road profiles, which is mounted behind the windshield of a vehicle, are investigated. Since this requires a calibration of the stereo camera system, but the effort for the user should be kept low, the camera self-calibration for this application is also examined. 3D reconstruction from stereoscopic images is a well-studied topic, but its application on road surfaces with little and repetitive textures requires special algorithms. For this reason, a new stereo method was developed. It is based on the plane-sweep approach in combination with semi-global matching. It was tested with different measures for pixel comparison. Furthermore, the plane-sweep approach was implemented in a neural network that solves the stereo correspondence problem in a single step. It uses the stereoscopic images as input and provides an elevation image as output. A completely new approach was developed for the self-calibration of mono cameras and stereo camera systems. Previous methods search for feature points in several images of the same scene. The points are matched between the images and used for the calibration. In contrast to these methods, the proposed method uses feature maps instead of feature points to compare multiple views of one and the same plane. To estimate the unknown parameters, the backpropagation algorithm is used together with the gradient descent method. The measurements obtained by stereoscopic image processing were compared with those obtained by industrial laser scanners. They show that both measurements are very close to each other and that a stereoscopic camera system is in principle suitable for capturing the surface profile of a road. Experiments show that the proposed self-calibration method is capable of estimating all parameters of a complex camera model, including lens distortion, with high precision. Bei der Planung von Straßenbaumaßnahmen ist es unabdingbar, über aktuelle Informationen über den Straßenzustand zu verfügen. Sollen diese Informationen nicht manuell gewonnen werden, werden derzeit Messfahrzeug mit Laserscannern verwendet, welche das 3D-Straßenprofil vermessen können. Für die regelmäßige Erfassung eines gesamten Straßennetzes wäre jedoch eine große Anzahl von Messfahrzeugen erforderlich. Da 2D-Straßenschäden automatisch auf monokularen Kamerabildern gefunden werden können, entstand die Idee, ein Stereokamerasystem zur Erfassung des 3D-Profils zu verwenden. Eine große Anzahl von Fahrzeugen könnte damit ausgerüstet werden und es könnten regelmäßig Daten von großen Straßennetzen erfasst werden. In dieser Arbeit werden die Einsatzmöglichkeiten eines Stereokamerasystems zur Messung von Straßenprofilen untersucht, dass sich hinter der Windschutzscheibe eines Fahrzeugs befindet. Da hierzu das Stereokamerasystems kalibriert sein muss, der Aufwand für den Anwender aber geringgehalten werden soll, wird außerdem die Selbstkalibrierung für diesen Einsatzzweck untersucht. Die 3D-Rekonstruktion aus stereoskopischen Bildern ist ein viel untersuchtes Thema, aber ihre Anwendung auf Straßenoberflächen mit wenig und sich wiederholenden Texturen erfordert spezielle Algorithmen. Aus diesem Grund wurde ein neues Stereoverfahren entwickelt. Es basiert auf dem Plane-sweep-Ansatz in Kombination mit Semi-global Matching. Es wurde mit verschiedene Maßen für den Vergleich von Pixeln getestet. Darüber hinaus wurde der Plane-sweep-Ansatz in einem neuronalen Netzwerk implementiert, das das Stereo-Korrespondenzproblem in einem einzigen Schritt löst. Es verwendet die stereoskopischen Bilder als Eingabe und liefert als Ausgabe ein Höhenbild. Für die Selbstkalibrierung von Monokameras und Stereokamerasystemen wurde ein völlig neuer Ansatz entwickelt. Bisherige Methoden suchen nach Merkmalspunkten in mehreren Bildern der gleichen Szene. Die Punkte werden zwischen den Bildern zugeordnet und für die Kalibrierung verwendet. Die vorgeschlagene Methode verwendet anstelle von Merkmalspunkten Feature-Maps um mehrere Ansichten derselben Ebene zu vergleichen. Zur Schätzung der unbekannten Parameter wird der Backpropagation-Algorithmus zusammen mit dem Gradientenabstiegsverfahren verwendet. Die durch stereoskopische Bildverarbeitung erhaltenen Messungen wurden mit Messungen von industriellen Laserscannern verglichen. Sie zeigen, dass beide sehr nahe beieinander liegen und dass ein Stereokamerasystem für die Erfassung des Oberflächenprofils einer Straße grundsätzlich geeignet ist. Experimente zeigen, dass die neue Selbstkalibrierungsmethode in der Lage ist, alle Parameter eines komplexen Kameramodells, einschließlich der Linsenverzerrung, mit hoher Präzision abzuschätzen.

Download or read book Recent Advances in Metrology written by Sanjay Yadav and published by Springer Nature. This book was released on 2023-10-03 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the 11th National Conference on Advances in Metrology (AdMet 2022). The book highlights and discusses the recent technological developments in the areas of fundamental and quantum metrology, physico-mechanical and electrical metrology, time and frequency metrology, materials metrology, industrial and legal metrology, digital transformation in metrology, among others. This book is aimed for those engaged in conformity assessment, quality system management, calibration, and testing in all sectors of industry. The book is a valuable reference for metrologists, scientists, engineers, academicians, and students from research institutes and industrial establishments to explore the future directions and research in the areas of sensors, advance materials, measurements, and quality improvement.

Download or read book Nature of Computation and Communication written by Phan Cong Vinh and published by Springer. This book was released on 2016-10-25 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the post-conference proceedings of the Second International Conference on Nature of Computation and Communication, ICTCC 2016, held in March 2016 in Rach Gia, Vietnam. The 36 revised full papers presented were carefully reviewed and selected from over 100 submissions. The papers cover formal methods for self-adaptive systems and discuss natural approaches and techniques for computation and communication.