Download or read book Thermo Hydraulics of Nuclear Reactors written by Christopher Earls Brennen and published by Cambridge University Press. This book was released on 2016-04-13 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and up-to-date summary of the essential thermo-hydraulic analyses and design principles of nuclear reactors for electricity generation. Beginning with the basic nuclear physics, it leads through technical and quantitative analyses to descriptions of both the normal operation of the various modern nuclear reactor designs and the analyses of the possible departures from normal operation. It then describes both the postulated accident scenarios and summaries of the causes for the three major nuclear power generation accidents, Three Mile Island, Chernobyl and Fukushima, as well as the major improvements to reactor safety that grew out of those analyses and accidents.
Download or read book Nuclear Systems Volume I written by Neil E. Todreas and published by CRC Press. This book was released on 2021-01-12 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Systems, Volume I: Thermal Hydraulic Fundamentals, Third Edition, provides an in-depth introduction to nuclear power, focusing on thermal hydraulic design and analysis of the nuclear core and other key nuclear plant components. The authors stress the integration of fluid flow and heat transfer as applied to all power reactor types and energy source distribution. They cover nuclear reactor concepts and systems, including GEN III+, GEN IV, and SMR reactors and new power cycles. The text includes new chapter examples and problems using concept parameters, full-color text and art, computer programs, figure slides, and a solutions manual. FEATURES Rigorous coverage of nuclear power generation fundamentals Description and analysis of the latest nuclear power plant designs and technologies Extensive examples in each chapter to illustrate the analysis methods which have been presented New full-color art and text features to enhance the presentation of topics Integration of fluid flow and heat transfer as applied to single- and two-phase coolants Readers will develop the knowledge and design skills needed to improve the next generation of nuclear reactors.
Download or read book Proceedings of the ANS ASME NRC International Topical Meeting on Nuclear Reactor Thermal Hydraulics Fundamental aspects of two phase flow and boiling heat transfer written by and published by . This book was released on 1980 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Nuclear Power Plant Thermal Hydraulics and Operations Topical Meeting written by Jason Chao and published by . This book was released on 1984 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1979 with total page 1914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Safety written by and published by . This book was released on 1983 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Post Dryout Heat Transfer written by G.F. Hewitt and published by Routledge. This book was released on 2017-10-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of post-dryout heat transfer has generated great interest because of its importance in determining maximum clad temperature in nuclear reactor loss-of-coolant accidents (LOCAs). An associated phenomenon, the deterioration of heat transfer in boiling, is significant to other industrial sectors. This book provides comprehensive coverage of post-dryout heat transfer, discussing such essential topics as post-dryout heat transfer in dispersed flow, interpretation and use of transient data in surface rewetting by reinstatement of flow or by reducing heat flux, rod bundles, two-phase flow occurrences in the post-dryout region, various methods for predicting ""inverted annular flow,"" and new experiments for measuring thermodynamic nonequilibrium with probes in the channel. The book also presents a basis for independent safety assessment of nuclear reactors and chemical plant systems where post-dryout heat transfer may occur. Post-Dryout Heat Transfer will be a useful reference for researchers and professionals in the nuclear and chemical production industries.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Science and Technology written by G.F. Hewitt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Download or read book Handbook of Phase Change written by S.G. Kandlikar and published by Routledge. This book was released on 2019-01-22 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa
Download or read book ASME Proceedings of the 1988 National Heat Transfer Conference HTD 96 written by and published by . This book was released on 1988 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1979 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. - Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors - Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) - Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes - Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants
Download or read book Multiphase Flow Dynamics 5 written by Nikolay Ivanov Kolev and published by Springer. This book was released on 2015-04-02 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step demonstrate the success of the different ideas and models. After an introduction of the design of the reactor pressure vessels for pressurized and boiling water reactors the accuracy of the modern methods is demonstrated using large number of experimental data sets for steady and transient flows in heated bundles. Starting with single pipe boiling going through boiling in the rod bundles the analysis of complete vessel including the reactor is finally demonstrated. Then a powerful method for nonlinear stability analysis of flow boiling and condensation is introduced. Models are presented and their accuracies are investigated for describing critical multiphase flow at different level of complexity. Therefore the book presents a complete coverage of the modern Nuclear Thermal Hydrodynamics. This present third edition includes various updates, extensions, improvements and corrections.
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1983-08 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1983 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
