Download or read book Proceedings of the Annual Symposium on Engineering Geology Geotechnical Engineering written by and published by . This book was released on 2002 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Geology and the Environment written by Paul G. Marinos and published by CRC Press. This book was released on 1997 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of five from the June 1997 conference was much delayed (the first four volumes were published in 1997). It comprises 23 special lectures solicited for the conference on various aspects of problematic soils, natural and man-made hazards, urban and regional planning, waste disposal, mines and quarries, large engineering works, and protection of geological, geographical, historical, and architectural heritage. There is no subject index. Annotation copyrighted by Book News Inc., Portland, OR
Download or read book Proceedings of the 5th International Young Geotechnical Engineers Conference written by IOS Press and published by IOS Press. This book was released on 2013-08-20 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical engineers are at work worldwide, contributing to sustainable living and to the creation of safe, economic and pleasant spaces to live, work and relax. With increased pressure on space and resources, particularly in cities, their expertise becomes ever more important. This book presents the proceedings of the 5th iYGEC, International Young Geotechnical Engineers' Conference, held at Marne-la-Vallée, France, from 31 August to 1 September 2013. It is also the second volume in the series Advances in Soil Mechanics and Geotechnical Engineering. The papers included here cover topics such as laboratory and field testing, geology and groundwater, earthworks, soil behavior, constitutive modeling, ground improvement, earthquake, retaining structures, foundations, slope stability, tunnels and observational methods. The iYGEC conference series brings together students and young people at the start of their career in the geotechnical professions to share their experience, and this book will be of interest to all those whose work involves soil mechanics and geotechnical engineering. The cover shows Dieppe harbour breakwater project, Louis-Alexandre de Cessart, 1776-1777. © École Nationale des Ponts et Chaussées.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 7743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book Geotechnical Engineering written by Ken K. S. Ho and published by CRC Press. This book was released on 2001 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Geology and Construction written by Fred G. Bell and published by CRC Press. This book was released on 2004-05-27 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the 2004 Claire P. Holdredge Award of the Association of Engineering Geologists (USA). The only book to concentrate on the relationship between geology and its implications for construction, this book covers the full scope of the subject from site investigation through to the complexities of reservoirs and dam sites. Features include international case studies throughout, and summaries of accepted practice, plus sections on waste disposal, and contaminated land.
Download or read book Hot Deserts written by M. J. Walker and published by Geological Society of London. This book was released on 2012 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an authoritative and comprehensive state-of-the-art review of hot desert terrains in all parts of the world, their geomaterials and influence on civil engineering site investigation, design and construction. It primarily covers conditions and materials in modern hot deserts, but there is also coverage of unmodified ancient desert soils that exhibit engineering behaviour similar to modern desert materials. Thorough and up-to-date guidance on modern field evaluation and ground investigation techniques in hot arid areas is provided, including reference to a new approach to the desert model and detailed specialised assessments of the latest methods for materials characterisation and testing. The volume is based on world-wide experience in hot desert terrain and draws upon the knowledge and expertise of the members of a Geological Society Engineering Group Working Party comprising practising geologists, geomorphologists and civil engineers with a wealth of varied, but complementary experience of working in hot deserts. It is an essential reference book for professionals, as well as a valuable textbook for students. It is written in a style that is accessible to the non-specialist. A comprehensive glossary is also included. The Geological Society of London. Founded in 1807, the Geological Society of London is the oldest geological society in the world, and one of the largest publishers in the Earth sciences. The Society publishes a wide range of high-quality peer-reviewed titles for academics and professionals working in the geosciences, and enjoys an enviable international reputation for the quality of its work.
Download or read book Comptes rendus du quatorzi me conf rence internationale de M canique des sols et des travaux de fondation Hambourg 6 12 septembre 1997 written by and published by CRC Press. This book was released on 1997 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering written by A. Anagnostopoulos and published by IOS Press. This book was released on 2013-03-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains the papers presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), held in Athens, Greece. Considerable progress has been made in recent decades in understanding the engineering behavior of those hard soils and weak rocks that clearly fall into either the field of soil or of rock mechanics, and there have been important developments in design and construction methods to cope with them. Progress would be even more desirable, however, for those materials which fall into the ‘grey’ area between soils and rocks. They present particular challenges due to their diversity, the difficulties and problems arising in their identification and classification, their sampling and testing and in the establishment of suitable models to adequately describe their behavior. The publication aims to provide an updated overview of the existing worldwide knowledge of the geological features, engineering properties and behavior of such hard soils and weak rocks, with particular reference to the design and construction methods and problems associated with these materials. Part 4 was published post-conference and includes Conference Reports.
Download or read book Proceeding of the 3rd International Conference on Geotechnical Engineering for Disaster Mitigation and Rehabilitation 2011 Combined with the 5th International Conference on Geotechnical and Highway Engineering Practical Applications Challenges and Opportunities written by and published by World Scientific. This book was released on 2011 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains 89 papers from 25 countries and regions, including 14 keynote lectures and 17 invited lectures, presented at the Third International Conference on Geotechnical Engineering for Disaster Mitigation and Rehabilitation (3ICGEDMAR 2011) together with the Fifth International Conference on Geotechnical & Highway Engineering (5ICGHE), which was held in Semarang, Indonesia, from 18 to 20 May 2011. This is the third conference in the GEDMAR conference series. The first was held in Singapore from 12 to 13 December 2005 and the second in Nanjing, China, from 30 May to 2 June 2008. The proceedings is divided into three sections : keynote papers, invited papers and conference papers under which there are six sub-sections : Case Studies on Recent Disasters; Soil Behaviours and Mechanisms for Hazard Analysis; Disaster Mitigation and Rehabilitation Techniques; Risk Analysis and Geohazard Assessment; Innovation Foundations for Rail, Highway, and Embankments; and Slope Failures and Remedial Measures. The conference is held under the auspices of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE) Technical Committee TC-303 : Coastal and River Disaster Mitigation and Rehabilitation, TC-203 : Earthquake Geotechnical Engineering and Associated Problems, TC-302 : Forensic Geotechnical Engineering, TC-304 : Engineering Practice of Risk Assessment and Management, TC-213 : Geotechnics of Soil Erosion, TC-202 : Transportation Geotechnics, TC-211 : Ground Improvement, Southeast Asian Geotechnical Society (SEAGS), Association of Geotechnical Societies in Southeast Asia (AGSSEA), and Road Engineering Association of Asia & Australasia (REAAA).
Download or read book Geotechnical and Geophysical Site Characterization 4 written by Roberto Quental Coutinho and published by CRC Press. This book was released on 2012-09-06 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book ICE Manual of Geotechnical Engineering Volume 1 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.
Download or read book Distributed Hydrological Modelling written by Michael B. Abbott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the task of the engineer, as of any other professional person, to do everything that is reasonably possible to analyse the difficulties with which his or her client is confronted, and on this basis to design solutions and implement these in practice. The distributed hydrological model is, correspondingly, the means for doing everything that is reasonably possible - of mobilising as much data and testing it with as much knowledge as is economically feasible - for the purpose of analysing problems and of designing and implementing remedial measures in the case of difficulties arising within the hydrological cycle. Thus the aim of distributed hydrologic modelling is to make the fullest use of cartographic data, of geological data, of satellite data, of stream discharge measurements, of borehole data, of observations of crops and other vegetation, of historical records of floods and droughts, and indeed of everything else that has ever been recorded or remembered, and then to apply to this everything that is known about meteorology, plant physiology, soil physics, hydrogeology, sediment transport and everything else that is relevant within this context. Of course, no matter how much data we have and no matter how much we know, it will never be enough to treat some problems and some situations, but still we can aim in this way to do the best that we possibly can.
Download or read book Practical Engineering Geology written by Steve Hencher and published by CRC Press. This book was released on 2024-04-22 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Engineering Geology provides an introduction to the way projects are managed, designed and constructed, and how the engineering geologist can contribute to cost- effective and safe project achievement. The need for a holistic view of geological materials, from soil to rock, and of geological history is emphasised. Chapters address key aspects of Geology for engineering and ground modelling Site investigation and testing of geological materials Geotechnical parameters Design of slopes, tunnels, foundations, and other engineering structures Identifying hazards Avoiding unexpected ground conditions This second edition includes a new chapter on environmental issues covering hydrogeology, considerations of climate change, earthquakes, and more. All chapters have been updated, with extensively revised figures throughout and several new case studies of unexpected ground conditions. The book will support practising engineering geologists and geotechnical engineers, as well as MSc level students of engineering geology and other geotechnical subjects.
Download or read book Bibliography and Index of Geology written by and published by . This book was released on 1992 with total page 1592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
