Download or read book Symbolic Algebraic Methods and Verification Methods written by Götz Alefeld and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The usual "implementation” of real numbers as floating point numbers on existing computers has the well-known disadvantage that most of the real numbers are not exactly representable in floating point. Also the four basic arithmetic operations can usually not be performed exactly. During the last years research in different areas has been intensified in order to overcome these problems. (LEDA-Library by K. Mehlhorn et al., "Exact arithmetic with real numbers” by A. Edalat et al., Symbolic algebraic methods, verification methods). The latest development is the combination of symbolic-algebraic methods and verification methods to so-called hybrid methods. – This book contains a collection of worked out talks on these subjects given during a Dagstuhl seminar at the Forschungszentrum für Informatik, Schlo€ Dagstuhl, Germany, presenting the state of the art.
Download or read book Symbolic algebraic Methods and Verification Methods written by Götz Alefeld and published by . This book was released on 1999 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Algebraic and Symbolic Computation Methods in Dynamical Systems written by Alban Quadrat and published by Springer. This book was released on 2020-04-07 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at reviewing recent progress in the direction of algebraic and symbolic computation methods for functional systems, e.g. ODE systems, differential time-delay equations, difference equations and integro-differential equations. In the nineties, modern algebraic theories were introduced in mathematical systems theory and in control theory. Combined with real algebraic geometry, which was previously introduced in control theory, the past years have seen a flourishing development of algebraic methods in control theory. One of the strengths of algebraic methods lies in their close connections to computations. The use of the above-mentioned algebraic theories in control theory has been an important source of motivation to develop effective versions of these theories (when possible). With the development of computer algebra and computer algebra systems, symbolic methods for control theory have been developed over the past years. The goal of this book is to propose a partial state of the art in this direction. To make recent results more easily accessible to a large audience, the chapters include materials which survey the main mathematical methods and results and which are illustrated with explicit examples.
Download or read book Symbolic Methods in Control System Analysis and Design written by N. Munro and published by IET. This book was released on 1999 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fifteen contributions provide an up-to-date treatment of issues in system modeling, system analysis, design and synthesis methods, and nonlinear systems. Coverage includes the application of multidimensional Laplace transforms to the modeling of nonlinear elements, a survey of customized computer algebra modeling programs for multibody dynamical systems, robust control of linear systems using a new linear programming approach, the development and testing of a new branch-and-bound algorithm fir global optimization using symbolic algebra techniques, and dynamic sliding mode control design using symbolic algebra tools.
Download or read book Symbolic Algebra Or The Algebra of Algebraic Numbers written by William Cain and published by . This book was released on 1884 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Correct Hardware Design and Verification Methods written by Daniel Geist and published by Springer Science & Business Media. This book was released on 2003-10-10 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th IFIP WG 10.5 Advanced Research Working Conference on Correct Hardware Design and Verification Methods, CHARME 2003, held in L'Aquila, Italy in October 2003. The 24 revised full papers and 8 short papers presented were carefully reviewed and selected from 65 submissions. The papers are organized in topical sections on software verification, automata based methods, processor verification, specification methods, theorem proving, bounded model checking, and model checking and applications.
Download or read book Interval Analysis written by Günter Mayer and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-04-10 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained text is a step-by-step introduction and a complete overview of interval computation and result verification, a subject whose importance has steadily increased over the past many years. The author, an expert in the field, gently presents the theory of interval analysis through many examples and exercises, and guides the reader from the basics of the theory to current research topics in the mathematics of computation. Contents Preliminaries Real intervals Interval vectors, interval matrices Expressions, P-contraction, ε-inflation Linear systems of equations Nonlinear systems of equations Eigenvalue problems Automatic differentiation Complex intervals
Download or read book Process Algebra and Probabilistic Methods Performance Modelling and Verification written by Luca de Alfaro and published by Springer Science & Business Media. This book was released on 2001-08-29 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Joint Workshop on Process Algebra and Performance Modeling and Probabilistic Methods in Verification, PAPM-PROBMIV 2001, held in Aachen, Germany in September 2001. The 12 revised full papers presented together with one invited paper were carefully reviewed and selected from 23 submissions. Among the topics addressed are model representation, model checking, probabilistic systems analysis, refinement, Markov chains, random variables, stochastic timed systems, Max-Plus algebra, process algebra, system modeling, and the Mobius modeling framework.
Download or read book Modelling Computation and Optimization in Information Systems and Management Sciences written by Hoai An Le Thi and published by Springer. This book was released on 2015-05-04 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings set contains 85 selected full papers presented at the 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences - MCO 2015, held on May 11–13, 2015 at Lorraine University, France. The present part I of the 2 volume set includes articles devoted to Combinatorial optimization and applications, DC programming and DCA: thirty years of Developments, Dynamic Optimization, Modelling and Optimization in financial engineering, Multiobjective programming, Numerical Optimization, Spline Approximation and Optimization, as well as Variational Principles and Applications.
Download or read book Computer Vision ECCV 2006 written by Aleš Leonardis and published by Springer. This book was released on 2006-07-25 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set comprising LNCS volumes 3951/3952/3953/3954 constitutes the refereed proceedings of the 9th European Conference on Computer Vision, ECCV 2006. The 192 papers presented cover the entire range of current issues in computer vision. The papers are organized in topical sections on recognition, statistical models and visual learning, 3D reconstruction and multi-view geometry, energy minimization, tracking and motion, segmentation, shape from X, visual tracking, face detection and recognition, and more.
Download or read book Numerical Data Fitting in Dynamical Systems written by Klaus Schittkowski and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real life phenomena in engineering, natural, or medical sciences are often described by a mathematical model with the goal to analyze numerically the behaviour of the system. Advantages of mathematical models are their cheap availability, the possibility of studying extreme situations that cannot be handled by experiments, or of simulating real systems during the design phase before constructing a first prototype. Moreover, they serve to verify decisions, to avoid expensive and time consuming experimental tests, to analyze, understand, and explain the behaviour of systems, or to optimize design and production. As soon as a mathematical model contains differential dependencies from an additional parameter, typically the time, we call it a dynamical model. There are two key questions always arising in a practical environment: 1 Is the mathematical model correct? 2 How can I quantify model parameters that cannot be measured directly? In principle, both questions are easily answered as soon as some experimental data are available. The idea is to compare measured data with predicted model function values and to minimize the differences over the whole parameter space. We have to reject a model if we are unable to find a reasonably accurate fit. To summarize, parameter estimation or data fitting, respectively, is extremely important in all practical situations, where a mathematical model and corresponding experimental data are available to describe the behaviour of a dynamical system.
Download or read book Mathematical Aspects of Computer and Information Sciences written by Ilias S. Kotsireas and published by Springer. This book was released on 2016-04-16 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 6th International Conference on Mathematical Aspects of Computer and Information Sciences, MACIS 2015, held in Berlin, Germany, in November 2015. The 48 revised papers presented together with 7 invited papers were carefully reviewed and selected from numerous submissions. The papers are grouped in topical sections on curves and surfaces, applied algebraic geometry, cryptography, verified numerical computation, polynomial system solving, managing massive data, computational theory of differential and difference equations, data and knowledge exploration, algorithm engineering in geometric computing, real complexity: theory and practice, global optimization, and general session.
Download or read book Computer Arithmetic and Validity written by Ulrich Kulisch and published by Walter de Gruyter. This book was released on 2013-04-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the revised and extended second edition of the successful basic book on computer arithmetic. It is consistent with the newest recent standard developments in the field. The book shows how the arithmetic and mathematical capability of the digital computer can be enhanced in a quite natural way. The work is motivated by the desire and the need to improve the accuracy of numerical computing and to control the quality of the computed results (validity). The accuracy requirements for the elementary floating-point operations are extended to the customary product spaces of computations including interval spaces. The mathematical properties of these models are extracted into an axiomatic approach which leads to a general theory of computer arithmetic. Detailed methods and circuits for the implementation of this advanced computer arithmetic on digital computers are developed in part two of the book. Part three then illustrates by a number of sample applications how this extended computer arithmetic can be used to compute highly accurate and mathematically verified results. The book can be used as a high-level undergraduate textbook but also as reference work for research in computer arithmetic and applied mathematics.
Download or read book Practical Design Verification written by Dhiraj K. Pradhan and published by Cambridge University Press. This book was released on 2009-06-11 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve design efficiency and reduce costs with this practical guide to formal and simulation-based functional verification. Giving you a theoretical and practical understanding of the key issues involved, expert authors including Wayne Wolf and Dan Gajski explain both formal techniques (model checking, equivalence checking) and simulation-based techniques (coverage metrics, test generation). You get insights into practical issues including hardware verification languages (HVLs) and system-level debugging. The foundations of formal and simulation-based techniques are covered too, as are more recent research advances including transaction-level modeling and assertion-based verification, plus the theoretical underpinnings of verification, including the use of decision diagrams and Boolean satisfiability (SAT).
Download or read book Fuzzy Information Processing 2023 written by Kelly Cohen and published by Springer Nature. This book was released on 2023-11-24 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of latest successes and applications of fuzzy techniques—techniques that use expert knowledge formulated by natural-language words like "small". Engineering applications deal with aerospace (control of spacecrafts and unmanned aerial vehicles, air traffic control, airport passenger flow predictions), materials (designing gold nano-structures for medicine, catalysis, and sensors), and robot navigation and manipulation. Other application areas include cosmology, demographics, finances, wine production, medicine (diagnostics, epidemics control), and predicting human behavior. In many cases, fuzzy techniques are combined with machine learning AI. Due to natural-language origin of fuzzy techniques, such combination adds explainability (X) to AI. This book is recommended to students and practitioners interested in the state-of-the-art fuzzy-related XAI and to researchers willing to take on numerous remaining challenges.
Download or read book Handbook of Discrete and Computational Geometry written by Csaba D. Toth and published by CRC Press. This book was released on 2017-11-22 with total page 1928 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Discrete and Computational Geometry is intended as a reference book fully accessible to nonspecialists as well as specialists, covering all major aspects of both fields. The book offers the most important results and methods in discrete and computational geometry to those who use them in their work, both in the academic world—as researchers in mathematics and computer science—and in the professional world—as practitioners in fields as diverse as operations research, molecular biology, and robotics. Discrete geometry has contributed significantly to the growth of discrete mathematics in recent years. This has been fueled partly by the advent of powerful computers and by the recent explosion of activity in the relatively young field of computational geometry. This synthesis between discrete and computational geometry lies at the heart of this Handbook. A growing list of application fields includes combinatorial optimization, computer-aided design, computer graphics, crystallography, data analysis, error-correcting codes, geographic information systems, motion planning, operations research, pattern recognition, robotics, solid modeling, and tomography.
Download or read book Topics in Numerical Analysis written by G. Alefeld and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eighteen papers submitted in celebration of the sixty-fifth birthday of Professor Tetsuro Yamamoto of Ehime University. Professor Yamamoto was born in Tottori, Japan on January 4, 1937. He obtained his B. S. and M. S. in mathematics from Hiroshima University in 1959 and 1961, respec tively. In 1966, he took a lecturer position in the Department of Mathematics, Faculty of General Education, Hiroshima University and obtained his Ph. D. degree from Hiroshima University two years later. In 1969, he moved to the Department of Applied Mathematics, Faculty of Engineering, Ehime University as an associate professor and he has been a full professor of the Department of Mathematics (now Department of Mathematical Sciences), Faculty of Science, since 1975. At the early stage of his study, he was interested in algebraic eigen value problems and linear iterative methods. He published some papers on these topics in high level international journals. After moving to Ehime University, he started his research on Newton's method and Newton-like methods for nonlinear operator equations. He published many papers on error estimates of the methods. He established the remarkable result that all the known error bounds for Newton's method under the Kantorovich assumptions follow from the Newton-Kantorovich theorem, which put a period to the race of finding sharper error bounds for Newton's method.
