Download or read book Internal Flow written by E. M. Greitzer and published by Cambridge University Press. This book was released on 2007-02-26 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the analysis and behaviour of internal flows encountered in propulsion systems, fluid machinery (compressors, turbines and pumps) and ducts (diffusers, nozzles and combustion chambers). The focus is on phenomena that are important in setting the performance of a broad range of fluid devices. The authors show that even for complex processes one can learn a great deal about the behaviour of such devices from a clear understanding and rigorous use of basic principles. Throughout the book they illustrate theoretical principles by reference to technological applications. The strong emphasis on fundamentals, however, means that the ideas presented can be applied beyond internal flow to other types of fluid motion. The book equips students and practising engineers with a range of new analytical tools. These tools offer enhanced interpretation and application of both experimental measurements and the computational procedures that characterize modern fluids engineering.
Download or read book Swirling Flows and Flames written by Toufik Boushaki and published by BoD – Books on Demand. This book was released on 2019-06-26 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Swirl flows are used in a wide range of industrial applications. In non-reacting cases, examples of applications include vortex amplifiers and reactors, heat exchangers, jet pumps, and cyclone separators. In reacting cases, swirlers are widely used in combustion systems, such as gas turbines, industrial furnaces, boilers, gasoline and diesel engines, and many other practical heating devices. Effects of using swirl on flow and combustion are significant and varied, and concern, for example, aerodynamics, mixing, flame stability, intensity of combustion, and pollutant emissions. The purpose of this book is to present recent research efforts to understand and characterize swirling flows of different types and in different applications. These include gaseous, liquid, and solid fuels in order to enhance combustion systems and their energy efficiency. Swirl flows are very complex and the studies proposed in this project are based on different means, including theoretical calculations, numerical modeling, and experimental measurements.
Download or read book Swirling Flow Problems at Intakes written by J. Knauss and published by Routledge. This book was released on 2017-11-01 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of vortex intake flow; Results theoretical & experimental work; Prediction of critical submergence; Modeling of vortices & swirling flows; Design; Intake structures; Pump sumps; Vortex-flow intakes. This volume forms an essential reference work for anyone involved in intakes, either as a practising design engineer or research worker. Water Power & Dam Constr., July 1988.The book is essential reading for postgraduate students & researchers alike and a very valuable aid to design engineers. Hydrol.Sc.Jrl., 33(3), 1988.
Download or read book Swirl Flows written by Ashwani K. Gupta and published by Routledge. This book was released on 1984 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Applications for Web Human Computer Interaction Signal and Image Processing and Pattern Recognition written by Tai-hoon Kim and published by Springer. This book was released on 2012-11-07 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the refereed proceedings of the International Conferences, SIP, WSE, and ICHCI 2012, held in conjunction with GST 2012 on Jeju Island, Korea, in November/December 2012. The papers presented were carefully reviewed and selected from numerous submissions and focus on the various aspects of signal processing, image processing, and pattern recognition, and Web science and engineering, and human computer interaction.
Download or read book Turbulent Shear Flows 4 written by L.J.S. Bradbury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Symposium on Turbulent Shear Flows took place at Karlsruhe University in Germany. The papers presented at this Symposium encompassed a similar range to that of the previous meetings, with greater emphasis placed on experimental work, and continued a trend towards the examination of complex flows. Once again, three dimensional, recirculating and reacting flows featured strongly in the programme and were complemented by consideration of two-phase flows and discussions of both numerical and experimental techniques. The Symposium brought together some 300 participants from all over the world, and it was evident that there is a need for Turbulent Shear Flows Symposia, in order to obtain and communicate new information useful to researchers in the field of turbulent flows and of interest to engineers who design flow equipment. This volume contains 27 papers selected from more than 100 presentations at the Symposium which have been reviewed and edited before publication. Together they provide an indication of the status of current knowledge on the subjects represented at the Sympo sium. They are grouped into four sections, namely: • Fundamentals • Free Flows • Boundary Layers • Reacting Flows As in previous volumes in this series, each section begins with an introductory article con sidering the papers which follow in the broader context of available literature and current research.
Download or read book Unsteady Aerodynamics Aeroacoustics and Aeroelasticity of Turbomachines written by Kenneth C. Hall and published by Springer Science & Business Media. This book was released on 2006-05-11 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a collection of technical papers that were presented at the 10th International Symposium on Unsteady Aerodynamics, Aeroacoustics, and Aeroelasticity of Turbomachines held September 8-11, 2003 at Duke University in Durham, North Carolina. The papers represent the latest in state of the art research in the areas of aeroacoustics, aerothermodynamics, computational methods, experimental testing related to flow instabilities, flutter, forced response, multistage, and rotor-stator effects for turbomachinery.
Download or read book Proceedings of the 5th International Conference on Jets Wakes and Separated Flows ICJWSF2015 written by Antonio Segalini and published by Springer. This book was released on 2016-07-18 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects various contributions from the 5th International Conference on Jets, Wakes and Separated Flows (ICJWSF2015) that took place in Stockholm during June 2015. Researchers from all around the world presented their latest results concerning fundamental and applied aspects of fluid dynamics. With its general character, the conference embraced many aspects of fluid dynamics, such as shear flows, multiphase flows and vortex flows, for instance. The structure of the present book reflects the variety of topics treated within the conference i.e. Jets, Wakes, Separated flows, Vehicle aerodynamics, Wall-bounded and confined flows, Noise, Turbomachinery flows, Multiphase and reacting flows, Vortex dynamics, Energy-related flows and a section dedicated to Numerical analyses.
Download or read book Proceedings of the 3rd International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power written by Matteo Pini and published by Springer Nature. This book was released on 2021-02-12 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of the main contributions from the third edition of the NICFD conference, organized by the Special Interest Group on Non-Ideal Compressible Fluid Dynamics (SIG-49). It provides insight on the latest research findings in the field of NICFD that are relevant to a number of engineering applications related to the conversion of renewable and waste energy sources, like organic Rankine cycles, supercritical CO2 cycle power plants, combustors operating with supercritical fluids, and heat pumps. The various chapters of the book document research encompassing theoretical, computational, and experimental aspects of the gas dynamics of non-ideal reactive and non-reactive flows and their impact for the design of internal flow components (turbomachinery, heat exchangers, combustors). Since the accurate calculation of fluid thermo-physical properties is of great concern in NICFD, all the chapters address this problem by describing state-of-the-art models for the characterization of the properties of pure fluids and mixtures.
Download or read book Flow Induced Vibration written by S. Ziada and published by CRC Press. This book was released on 2000-01-01 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow-induced vibrations and noise continue to cause problems in a wide range of engineering applications ranging from civil engineering and marine structures to power generation and chemical processing. These proceedings bring together more than a hundred papers dealing with a variety of topics relating to flow-induced vibration and noise. The cont
Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.
Download or read book Counterflows written by Vladimir Shtern and published by Cambridge University Press. This book was released on 2012-10-15 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the physical mechanisms that drive counterflows, examining how they emerge, develop, become double and multiple counterflows and comprise both global and local circulations. Counterflows play an important role in nature and technology. A natural example is the Gulf Stream and the opposite flow in the ocean depths. Technological applications include hydrocyclones, vortex tubes and vortex combustors. These elongated counterflows are wildly turbulent but survive intense mixing, a seeming paradox. Local counterflows, whose spatial extent is small compared with that of surrounding flows, occur behind bluff bodies and in swirling streams. The latter are often referred to as vortex breakdown bubbles, which occur in tornadoes and above delta wings. Most scale counterflows are cosmic bipolar jets. Most miniature counterflows occur in capillary menisci of electrosprays and fuel atomisers.
Download or read book Surface Finishing Theory and New Technology written by Shengqiang Yang and published by Springer. This book was released on 2017-11-15 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the theory and techniques of free abrasive tool finishing technology. Providing analytical methods and practical technical references for the engineers involved in surface-finishing processes, it significantly contributes to improving part quality and performance while also promoting further developments in surface finishing technology. Combining a highly systematic approach, readability and novel content, it is a valuable resource for researchers and graduates working in mechanical engineering fields, especially in surface finishing.
Download or read book Fluid Mechanics and Fluid Power Volume 4 written by Krishna Mohan Singh and published by Springer Nature. This book was released on with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Hybrid RANS LES Modelling written by Song Fu and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book contains contributions presented at the Fourth Symposium on Hybrid RANS-LES Methods, held in Beijing, China, 28-30 September 2011, being a continuation of symposia taking place in Stockholm (Sweden, 2005), in Corfu (Greece, 2007), and Gdansk (Poland, 2009). The contributions to the last two symposia were published as NNFM, Vol. 97 and Vol. 111. At the Beijing symposium, along with seven invited keynotes, another 46 papers (plus 5 posters) were presented addressing topics on Novel turbulence-resolving simulation and modelling, Improved hybrid RANS-LES methods, Comparative studies of difference modelling methods, Modelling-related numerical issues and Industrial applications.. The present book reflects recent activities and new progress made in the development and applications of hybrid RANS-LES methods in general.
Download or read book Advances in Design Simulation and Manufacturing III written by Vitalii Ivanov and published by Springer Nature. This book was released on 2020-06-04 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing. Covering recent developments in the mechanics of solids and structures; numerical simulation of coupled problems, including wearing, compression, detonation and collision; and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology. Part of a two-volume set based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020, in Kharkiv, Ukraine, this book provides academics and professionals with extensive information on the latest trends, technologies and challenges in the field as well as practical lessons learned.
Download or read book Fundamentals and Technology of Combustion written by F El-Mahallawy and published by Elsevier. This book was released on 2002-07-10 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Technology of Combustion contains brief descriptions of combustion fundamental processes, followed by an extensive survey of the combustion research technology. It also includes mathematical combustion modeling of the processes covering mainly premixed and diffusion flames, where many chemical and physical processes compete in complex ways, for both laminar and turbulent flows. The combustion chemistry models that validate experimental data for different fuels are sufficiently accurate to allow confident predictions of the flame characteristics. This illustrates a unique bridge between combustion fundamentals and combustion technology, which provides a valuable technical reference for many engineers and scientists. Moreover, the book gives the reader sufficient background of basic engineering sciences such as chemistry, thermodynamics, heat transfer and fluid mechanics. The combustion research and mathematical models fit between small-scale laboratory burner flames, and large-scale industrial boilers, furnaces and combustion chambers. The materials have been collected from previous relevant research and some selected papers of the authors and co-workers, which have been presented mainly in different refereed journals, international conferences and symposia, thus providing a comprehensive collection. Furthermore, the book includes some of the many recent general correlations for the characteristics of laminar, turbulent, premixed and diffusion flames in an easily usable form. The authors believe that further progress in optimizing combustion performance and reducing polluting emissions can only be treated through understanding of combustion chemistry.
