Download or read book Survey of Present Information on Elastohydrodynamic Lubrication of Gearing written by L. G. Schneider and published by . This book was released on 1967 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report is a survey of numerous published theoretical and experimental investigations in elastohydrodynamic lubrication with the intent of establishing their applicability to design and to lubrication investigations related to future high performance Navy gearing. While great progress in understanding the parameters of importance in elastohydrodynamic lubrication has been made, workable solutions for use in normal design are available only for limited conditions which are realized in rolling contact when little or no sliding occurs. In gearing, this condition exists only at the pitch point so that theoretical prediction of oil-film thickness becomes increasingly overly optimistic as tooth contact distance from the pitch line (and thus sliding velocity) increases. (Author).

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Elasto hydrodynamic Lubrication written by D. Dowson and published by . This book was released on 1966 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1967-04 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubrication Corrosion and Wear written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1966 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Calculation of Elastohydrodynamic Lubrication written by Ping Huang and published by John Wiley & Sons. This book was released on 2015-09-21 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book not only offers scientists and engineers a clear inter-disciplinary introduction and orientation to all major EHL problems and their solutions but, most importantly, it also provides numerical programs on specific application in engineering. • A one-stop reference providing equations and their solutions to all major elastohydrodynamic lubrication (EHL) problems, plus numerical programs on specific applications in engineering • offers engineers and scientists a clear inter-disciplinary introduction and a concise program for practical engineering applications to most important EHL problems and their solutions • brings together a number of case studies in one text, each being solved using solution methods which share common features and methods

Download or read book Thermal Elastohydrodynamic Lubrication of Spur Gears written by K. L. Wang and published by . This book was released on 1980 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rheology and Elastohydrodynamic Lubrication written by B.O. Jacobson and published by Elsevier. This book was released on 1991-07-24 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a thorough overview on recent developments in lubricant rheology, elastohydrodynamic lubrication and the effects of surface roughness and particulate contamination in the lubricant on the overall behaviour of a heavily loaded lubricated contact. One of the aims of the book is to make clear to the reader that a Newtonian model for the lubricant behaviour does not have enough degrees of freedom to be able to describe the friction - traction behaviour of heavily loaded lubricated contacts or the oil film build-up and collapse under surface asperities for rough surfaces. The book contains quite a lot of experimental data of lubricants at high pressures, both solidification pressures, compressibilities and shear strength increase coefficients, which make it possible to estimate the friction and power loss in heavily loaded lubricated contacts for different pressures, temperatures, sliding speeds, and lubricant types. This is the first time that data of this type has been included in a textbook and it is hoped that the questions highlighted will serve to initiate and guide future research in this field.

Download or read book Elastohydrodynamic Lubrication written by Institution of Mechanical Engineers (Great Britain). Lubrication and Wear Group and published by . This book was released on 1966 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elastohydrodynamics written by Ramsey Gohar and published by World Scientific. This book was released on 2001 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastohydrodynamic lubrication (EHL) is a difficult topic, embracing several disciplines, which can cause many problems for engineers and scientists. This up-to-date volume explains the subject both theoretically and experimentally. Moreover, with a refreshing approach and using several novel techniques of application, it provides lucid coverage of new and important findings. Here, in one volume, are the results of much research over the last forty years. The author's clear explanation of the theory of EHL is authoritatively applied to a wide range of related topics, with physical explanations wherever possible. Many of the experimental techniques described were carried out at the Imperial College Lubrication Laboratory, where the application of interferometry (a means of measuring the EHL film thickness) was pioneered.

Download or read book Advanced Tribology written by Jianbin Luo and published by Springer Science & Business Media. This book was released on 2010-07-16 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.

Download or read book Thermal Elastohydrodynamic Lubrication of Spur Gears written by Kuan-Lan Wang and published by . This book was released on 1976 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubrication of Machine Elements written by Bernard J. Hamrock and published by . This book was released on 1984 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IUTAM Symposium on Elastohydrodynamics and Micro elastohydrodynamics written by R.W. Snidle and published by Springer Science & Business Media. This book was released on 2006-01-09 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics held in Cardiff from 1-3 September 2004. It contains 31 articles by leading researchers in the field. The symposium focused on theoretical, experimental and computational issues in elastohydrodynamic lubrication (EHL) both in relation to smooth surfaces and in situations where the film is of the same order or thinner than the surface roughness (micro-EHL). The last IUTAM Symposium in this general area of contact of deformable bodies was in 1974. The emphasis in the Symposium was upon fundamental issues such as: solution methods; lubricant rheological models, thermal effects; both low and high elastic modulus situations; human and replacement joints; fluid traction; dynamic effects, asperity lubrication and the failure of lubrication; surface fatigue and thermal distress under EHL conditions. The book will be useful to those active in basic elastohydrodynamics research who wish to gain an up-to-date understanding of the subject from leading experts in the field.

Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational