Download or read book Surfacing and Additive Technologies in Welded Fabrication written by Igor Ryabtsev and published by Springer Nature. This book was released on 2023-06-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of a wide range of surfacing methods, detailing their physical basics and technologies. Each section of the book provides information on the formation of the structure and properties of the deposited metal, the reasons for the formation of defects, and directions for prevention. The book also covers the certification of surfacing procedures, adhering to international standards. With a focus on practical applications, the book is an essential reference for anyone working in the field of welding and related technologies. It includes detailed illustrations and diagrams, making it easy to understand and follow the concepts.
Download or read book Friction Based Additive Manufacturing Technologies written by Sandeep Rathee and published by CRC Press. This book was released on 2018-04-17 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, most of the major commercial metal additive manufacturing (MAM) techniques rely on liquid phase processing. The liquid to solid phase transformations in these techniques results in microstructural issues and defects which in turn tantamount to inferior properties of fabricated build. Friction based additive manufacturing technologies are solid state processing techniques which work on the principles of friction based joining processes and layer by layer additive manufacturing. This book primarily addresses the basic understanding of seven friction based additive manufacturing techniques. These techniques include additive manufacturing methods based on rotary friction welding, linear friction welding, friction deposition, friction surfacing, friction stir additive manufacturing, friction assisted seam welding and additive friction stir. The principle of operations, benefits, limitations and recent developments of each technique has been described. It covers potentional and probable applications of each technique through review of various experimental studies. Features Targets friction based solid state additive manufacturing of metallic materials Describes principle of operation of seven friction based additive manufacturing techniques Reviews latest trends of these processes via experimental studies Describes benefits and limitations of each technique Covers current and probable applications of these techniques
Download or read book Advances in Additive Manufacturing and Joining written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-10-16 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on additive manufacturing (popularly known as 3D printing) and joining which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The contents of this volume present the latest technological advancements for improving the efficiency, accuracy and speed of the additive manufacturing process and in fusion and solid-state welding technologies, with a variety of technologies, including fused deposition modelling, poly jet 3D printing, weld deposition based technology, selective laser melting and important welding technologies being covered. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Multi dimensional Additive Manufacturing written by Soshu Kirihara and published by Springer Nature. This book was released on 2020-11-17 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, basic sciences and applied technologies in 3D printing and 2D coating—including 2D surface modulations on 3D printed objects—are described to explore and to image novel multidimensional additive manufacturing. Renowned researchers were selected from universities and national institutes as authors by the editorial board established in the Surface Modification Research and Technology Committee of the Japan Welding Engineering Society. The main readers of this book are expected to be graduate students, professional researchers, and engineers. Here, they can acquire abundant knowledge of digital design concepts and functional evaluations, enabling them practice material selection and process parameter optimization in novel additive manufacturing.
Download or read book Additive and Subtractive Manufacturing written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) and subtractive manufacturing (SM) offer numerous advantages in the production of single and multiple components. They provide incomparable design independence and are used to fabricate products in several industries, e.g.: aeronautic, automotive, biomedical, etc. The book presents recent results of processes including 3D printing, SLS (selective laser sintering), EBM (electron beam melting) and Precise Cutting and Drilling.
Download or read book New Materials Processing and Manufacturability written by R. Thanigaivelan and published by John Wiley & Sons. This book was released on 2024-07-26 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on multiple areas of manufacturing, including cutting-edge material processing technologies, custom-made materials, metallic and non-metallic materials, new engineering experiments, contemporary machining, joining, surface modification, and process optimization techniques. Readers will find in this volume an extensive exploration of various advanced manufacturing and material engineering topics. It includes a detailed examination of aluminum grades and their applications, an overview of cold spray additive manufacturing, and a discussion on Gas Metal Arc Welding (GMAW) for cladding low-carbon steel plates. The volume also presents innovative approaches to brake pedal design using topology optimization, analysis of resistance-spot welding quality, and the impact of shot peening on the corrosion behavior of SiC Particle Reinforced Aluminum Composite. It highlights crucial factors in 3D printed component strength, reviews 3D milling operations with ABAQUS, and delves into the rare ferroelectric material Fresnoite. The book surveys visual sensing technologies for weld pool analysis, simulates Claus Sulfur Recovery Units with Aspen Plus, and discusses ultrasonic-assisted stir casting for metal matrix nanocomposites. It also covers the joining of dissimilar magnesium alloys, advancements in electrochemical surface coatings, unconventional machining techniques, surface coating processes using pulsed power systems, natural fiber-reinforced composite fabrication, and process parameter optimization in laser beam welding using NSGA-II. Audience The book will interest researchers in academia and industry engineers in advanced manufacturing, materials science, surface science, adhesion and coatings, production engineering, civil engineering, and welding.
Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
Download or read book Solid State Metal Additive Manufacturing written by Hang Z. Yu and published by John Wiley & Sons. This book was released on 2024-07-10 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future direction of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.
Download or read book Advances in Welding Technologies for Process Development written by Jaykumar Vora and published by CRC Press. This book was released on 2019-02-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within manufacturing, welding is by far the most widely used fabrication method used for production, leading to a rise in research and development activities pertaining to the welding and joining of different, similar, and dissimilar combinations of the metals. This book addresses recent advances in various welding processes across the domain, including arc welding and solid-state welding process, as well as experimental processes. The content is structured to update readers about the working principle, predicaments in existing process, innovations to overcome these problems, and direct industrial and practical applications. Key Features: Describes recent developments in welding technology, engineering, and science Discusses advanced computational techniques for procedure development Reviews recent trends of implementing DOE and meta-heuristics optimization techniques for setting accurate parameters Addresses related theoretical, practical, and industrial aspects Includes all the aspects of welding, such as arc welding, solid state welding, and weld overlay
Download or read book Solid State Additive Manufacturing written by Amlan Kar and published by CRC Press. This book was released on 2023-12-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text focuses on discussing the solid-state deformation behavior of materials in additive manufacturing processes. It highlights the process optimization and bonding of different layers during layer-by-layer deposition of different materials in Solid-State. It covers the design, process, and advancement of solid-state additive manufacturing methods. • Covers the fundamentals of materials processing, including the stress–strain–temperature correlation in solid-state processing and manufacturing. • Discusses solid-state additive manufacturing methods, and optimization strategies for the fabrication of additive manufacturing products. • Showcases the mechanisms associated with improvement in mechanical properties of Solid-State additive manufacturing products. • Provides a comprehensive discussion on microstructural stability and homogeneity in mechanical properties. • Presents hybrid solid-state process for fabrication of multilayer components and composite materials. • Provides a detailed review of laser-based post-processing techniques The text focuses on the Solid-State additive manufacturing techniques for the fabrication of industrially relevant products. It gives in-depth information on the fundamental aspects, hybridization of the processes, fabrication of different materials, improvement in product performance, and Internet of Things enabled manufacturing. The text covers crucial topics, including hybrid Solid- State additive manufacturing, cold spray additive manufacturing, online defect detection of products, and post-processing of additively manufactured components. These subjects are significant in advancing additive manufacturing technology and ensuring the quality and efficiency of the produced components. It will serve as an ideal reference text for senior undergraduate and graduate students, and researchers in fields such as mechanical engineering, aerospace engineering, manufacturing engineering, and production engineering. .
Download or read book Advances in Additive Manufacturing and Metal Joining written by N. Ramesh Babu and published by Springer Nature. This book was released on 2023-05-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnology, Industry 4.0, optimization techniques, micro-electric discharge machining, electrochemical micro-machining, thin films, optimization of micro-machining process parameters, machining of nano-composites, characterization using atomic force microscopy, micro-tool fabrications, characterization of nano-composites, surface roughness analysis, tribological performance of surface coated materials and sustainability in manufacturing. The contents of this book are useful for students, researchers and as well as industry professionals in the various fields of mechanical engineering.
Download or read book Additive Manufacturing for Advance Applications written by Pawan Sharma and published by CRC Press. This book was released on 2024-06-26 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest trends such as 4D printing, wire arc additive manufacturing (WAAM), direct energy deposition, and topological optimization in additive manufacturing (AM), and its compliance with the ASTM/ISO standards. It further explains materials for additive manufacturing and the development of novel future materials. The focus of this book is to cover the fundamentals, principles, selection of material and equipment, and applications of additive manufacturing (AM) in a comprehensive manner. It will showcase information about the effective utilization of additive manufacturing for advanced applications in diverse areas such as biomedical, aerospace, automobile, defence, and reverse engineering. The other main features are- · Covers comprehensive discussion on the theoretical aspects of additive manufacturing such as sintering, diffusion, and photopolymerization. · Showcases applications of additive manufacturing in diverse fields including aerospace engineering, automotive engineering, biomedical engineering, and reverse engineering. · Presents case studies to showcase real-time problems and solutions using additive manufacturing. · Includes pedagogical features such as algorithms, exercises, and case studies. The text is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of manufacturing engineering, industrial engineering, production engineering, mechanical engineering, and aerospace engineering.
Download or read book Additive Manufacturing written by Rupinder Singh and published by CRC Press. This book was released on 2018-09-13 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been a great deal of progress in additive manufacturing (AM) during the past two decades and recent developments have been highlighted by many researchers. However, until now, there has been a limit to what is available for beginners in a step-by-step format, showcasing the different commercial AM technologies for field application. This book helps fill that gap. Additive Manufacturing: Applications and Innovations presents case studies of commonly used AM technologies with basic numerical problems for better understanding. It also includes hybrid processes and 4D printing applications, which currently are not offered in other AM books. Features Offers solved and unsolved problems in additive manufacturing Provides an understanding for additive manufacturing per international standards Includes case studies for better understanding of the individual processes Presents a review of specific technology highlights Introduces future research directions, mainly in 4D printing applications
Download or read book Innovative Processes and Materials in Additive Manufacturing written by Sunpreet Singh and published by Woodhead Publishing. This book was released on 2022-09-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Processes and Materials in Additive Manufacturing explains game-changing interdisciplinary applications of recent research breakthroughs in additive manufacturing technology. The number of research publications addressing additive manufacturing has soared in recent years as a range of disciplines explore the possibilities that this technology can provide. This book acts as a bridge between this high-level research and the large number of academics and practitioners looking to additive manufacturing for innovative solutions, providing them with practical and approachable information. Applications in aerospace, automotive, medical, construction, and food industries are addressed, featuring technical details that will help successful implementation. This unique book also provides broad coverage of the theory behind this emerging technology, including material development, as well as the technical details required for readers to investigate the novel applications of the involved methods for themselves. Includes case studies from the aerospace, construction and medical industries Features innovations in the integration of additive manufacturing processes with other manufacturing technologies Identifies exciting routes for future research and application areas of additive manufacturing
Download or read book Advances in Metal Additive Manufacturing written by Sachin Salunkhe and published by Elsevier. This book was released on 2022-10-10 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Metal Additive Manufacturing explains fundamental information and the latest research on new technologies, including powder bed fusion, direct energy deposition using high energy beams, and hybrid additive and subtractive methods. This book introduces readers to the technology, provides everything needed to understand how the different stages work together, and inspires to think beyond traditional metal processing to capture new ideas in metal. Chapters offer an introduction on metal additive manufacturing, processes, and properties and standards and then present surveys on the most significant international advances in metal additive manufacturing. Throughout, the book presents a focus on the effect of important process parameters on the microstructure, mechanical properties and wear behavior of additively manufactured parts. Covers the entire process chain of metal additive manufacturing, from input data preparation to part certification Describes a wide range of the latest design tools and options, including generative design, topology optimization, and lattice and surface optimization Addresses additive manufacturing, with a comprehensive list of metals including titanium, aluminum, iron-and nickel-based alloys and Inconel 718
Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject Includes case studies of innovative additive manufacturing practices from industry
Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.