Download or read book Surface Treatment Industry in the Nordic Countries Overview and BAT examples written by Karström, Kristoffer and published by Nordic Council of Ministers. This book was released on 2021-02-25 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2021-509/ The objectives of this report have been to present an overview of the surface treatment (STM) industry and the legal framework for implementation of the IED directive in the Nordic countries. The project describes currently used Best Available Techniques (BATs) in the STM industry in the Nordic countries. Further the project describes the key environmental aspects of the STM sector relating to the use of raw materials, resource use of energy and water, emissions to surface- and groundwater, the generation of solid and liquid wastes. For the final part of the project, twelve BAT candidates and four new emerging techniques are described. The techniques are focusing on resource use, emissions to water, waste management, circular economy, energy use. Optimisation, closed loop systems, digitalisation and automation are common denominators.
Download or read book BAT for combustion and incineration residues in a Circular Economy written by Hjelmar, Ole and published by Nordic Council of Ministers. This book was released on 2022-09-28 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2022-542/ Combustion of biomass and incineration of solid waste and sewage sludge are important parts of the energy production and waste management infrastructure in most of the Nordic countries, but they also produce substantial quantities of residual waste in terms of bottom ash, fly ash and flue gas cleaning residues which contain potentially harmful substances in various amounts. Preferably, the ashes and residues should be treated and utilised as part of the Circular Economy. The project provides an overview of the utilisation options, including environmental and treatment requirements, and of the associated technical and regulatory frameworks and practical conditions of utilisation. Compliance of combinations of treatments and applications of ashes and residues with Best Available Techniques (BAT) has been assessed, and seven Nordic BAT candidates have been proposed and described in detail.
Download or read book DEA an Aid for Identification of BAT in the Inorganic Surface Treatment Industry written by and published by Nordic Council of Ministers. This book was released on 2002 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BAT examples from the Nordic iron and steel industry written by and published by Nordic Council of Ministers. This book was released on 2006 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BAT in smaller biogas plants in the Nordic countries written by Nordic Council of Ministers Secretariat and published by Nordic Council of Ministers. This book was released on 2020-10-16 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: http://urn.kb.se/resolve?urn=urn:nbn:se:norden:org:diva-6174 The project proposes and describes techniques, which can be considered as best available techniques (BAT) used on biogas plants in the Nordic countries in order to give inspiration to the sector and authorities. The project describes the size and characteristics of the biogas industry and the regulatory framework in the countries. Further the project describes the potential environmental impact from different types of biogas plants and utilization of the digestate and energy. The plants included in the project have a permitted treatment capacity larger than 30 and less than 100 tonnes of feedstock per day. Ten BAT candidates are discussed in the report. Among those are location of biogas plant in the planning stage, selection of suitable feedstock in co-digestion, handling of air emissions and quality of biogas. Areas of research and development in the biogas sector are also discussed.
Download or read book Bat for Textile Industry written by and published by Nordic Council of Ministers. This book was released on 1996 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nordic Shipyards written by Salminen, Esa and published by Nordic Council of Ministers. This book was released on 2017-01-03 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shipbuilding has a long tradition in all the Nordic countries. Hence, the Nordic Council of Ministers, the BAT Group under the Working Group for Sustainable Consumption and Production (also called HKP Group) awarded Vahanen Environment Oy, Finland, together with COWI AS, Denmark to prepare a Best Available Techniques (BAT) project on shipyards in the Nordic countries. The objectives of the project have been to: • review and describe the shipyard sector in the Nordic countries • review and describe the used techniques in the Nordic countries • identify and describe the Key Environmental Indicators from the Nordic perspective • identify and describe techniques that shall be included in the considerations of representing BAT in shipyards. The scope of the project has included steel ships. The main focus has been on surface treatment in relation to maintenance and repair.
Download or read book Water 21 written by and published by . This book was released on 1999 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the Society of Chemical Industry written by Society of Chemical Industry (Great Britain) and published by . This book was released on 1894 with total page 1348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes list of members, 1882-1902 and proceedings of the annual meetings and various supplements.
Download or read book Surface Application of Paper Chemicals written by J. Brander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exception of a slight hiccup during the height of the recent environmental movement (during the early 1990s), when for a year or two consumers were prepared to pay a price premium for lower quality recycled paper than for the virgin product, the inexorable improvement in the quality demanded of paper products continues. This demand for quality covers not only the aesthetics ofthe product but also its performance. Moreover, it is becoming increasingly the case that papers designed for a particular use must, as it were incidentally, also perform well in alternative applications. An example is that of office and printing papers, which are expected to perform as well in copier machines as in all the various forms of impact and non-impact printers. But even greater demands are made in other product areas, where board designed for dry foods can also be expected to protect moist and fatty materials and be made of 100% recycled fibre. The need to isolate foodstuffs from some of the contaminants that can affect recycled board is a· serious challenge. Thus, papermakers are constantly striving to meet a broadening spectrum of demands on their products; often while accepting declining quality of raw materials. The product design philosophy that has arisen in response to this is increasingly to isolate the bulk of a paper from its uses: to engineer the needed performance characteristics into the paper surfaces while more or less ignoring what happens inside.
Download or read book Topics in Ecological and Environmental Microbiology written by Thomas Mitchell Schmidt and published by Academic Press. This book was released on 2011-09-28 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of ecological aspects of the metabolism and behavior of microbes, microbial habitats, biogeochemical cycles, and biotechnology. It was designed by selecting relevant chapters from the comprehensive Encyclopedia of Microbiology, 3rd edn., and inviting the original authors to update their material to include key developments and advances in the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1974 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotoxicology in Safety Assessment of Nanomaterials written by Henriqueta Louro and published by Springer Nature. This book was released on 2022-05-18 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its advent, nanotechnologies are considered key enabling technologies that take advantage of a wide array of nanomaterials (NMs) for biomedical and industrial applications generating significant societal and economic benefits. However, such innovation increases human exposure to these substances through inhalation, ingestion or dermal contact raising public health concerns. Furthermore, the NMs’ specific physicochemical properties, that confer them unique beneficial characteristics, can also elicit nano-bio interactions leading to toxicity and concerns for public health. In addition, such properties can be affected by the surrounding matrix, particularly when incorporated in complex matrices such as food products, leading to secondary features potentially more relevant than primary characteristics for determining their toxicological outcome. These nano specific issues raise the question of whether the NMs may produce adverse outcomes that are not accounted for when using conventional toxicological approaches to assess their safety. Such uncertainties about the safety of NMs for human health and the environment may hamper a faster and more widespread exploration of their potentials. In response, the NMs definition has evolved, and nanotoxicology has developed towards new and more integrative approach methods to support regulatory and policy actions. This book provides a perspective on recent developments in the synthesis, application, and characterization of NMs and the related nanotechnologies, focusing on nanotoxicology for their accurate safety assessment early in the product development stage. The use of complex in vitro models, including multicellular systems and organoids, and “omics-based” approaches, such as transcriptomics or epigenomics, have greatly contributed to an in-depth understanding of the cellular and molecular mechanisms behind some NMs toxicity. Such mechanistic knowledge is equally addressed in this book and has set the basis for a predictive nanotoxicology approach building on adverse outcome pathways. In addition, considering the knowledge provided by the above-mentioned approaches, insights into risk assessment, standardization, and regulation of NMs are also included. Incorporating adequate nanosafety assessment early in the life-cycle of NMs will allow the implementation of the safe and sustainable-by-design paradigm enabling safety to keep pace with innovation. Chapters 10 and 15 are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Tanning of Hides and Skins written by International Labour Office and published by Mitchell Beazley. This book was released on 1981 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides detailed technical and economic information on four different scales of production. Six alternative technologies are described, from fully mechanized 200-hides-per-day to a highly labour intensive two-hides per day project. Aimed at helping tanners in developing countries choose and operate tanning processes.
Download or read book Engineers Digest written by and published by . This book was released on 1983 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineers Digest written by and published by . This book was released on 1983 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Petrochemicals written by Vivek Patel and published by BoD – Books on Demand. This book was released on 2015-09-30 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petrochemical industry is an important area in our pursuits for economic growth, employment generation, and basic needs. It is a huge field that encompasses many commercial petrochemical and polymer-enabled products. The book is designed to help the reader, particularly students and researchers of petroleum science and engineering, to understand synthesis, processing, mechanics, and simulation of the petroleum processes. The selection of topics addressed and the examples, tables, and graphs used to illustrate them are governed, to a large extent, by the fact that this book is aimed primarily at petroleum science and engineering technologists. Undoubtedly, this book contains must read materials for students, engineers, and researchers working in the area of petrochemicals and petroleum and provides valuable insights into the related synthesis, processing, mechanisms, and simulation. This book is concise, self-explanatory, informative, and cost-effective.
