Download or read book Surface Tension in Microsystems written by Pierre Lambert and published by Springer Science & Business Media. This book was released on 2013-08-31 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how surface tension effects can be used by engineers to provide mechanical functions in miniaturized products (1 mm). Even if precursors of this field such as Jurin or Laplace already date back to the 18th century, describing surface tension effects from a mechanical perspective is very recent.brThe originality of this book is to consider the effects of capillary bridges on solids, including forces and torques exerted both statically and dynamically by the liquid along the 6 degrees-of-freedom.brIt provides a comprehensive approach to various applications, such as capillary adhesion (axial force), centering force in packaging and micro-assembly (lateral force) and recent developments such as a capillary motor (torque).
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
Download or read book Micro and Nanoscale Fluid Mechanics written by Brian J. Kirby and published by Cambridge University Press. This book was released on 2010-07-26 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text focuses on the physics of fluid transport in micro- and nanofabricated liquid-phase systems, with consideration of gas bubbles, solid particles, and macromolecules. This text was designed with the goal of bringing together several areas that are often taught separately - namely, fluid mechanics, electrodynamics, and interfacial chemistry and electrochemistry - with a focused goal of preparing the modern microfluidics researcher to analyse and model continuum fluid mechanical systems encountered when working with micro- and nanofabricated devices. This text serves as a useful reference for practising researchers but is designed primarily for classroom instruction. Worked sample problems are included throughout to assist the student, and exercises at the end of each chapter help facilitate class learning.
Download or read book Surface Tension and the Spreading of Liquids written by and published by CUP Archive. This book was released on with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of Microdroplets written by Jean Berthier and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Physics of Microdroplets gives the reader the theoretical and numerical tools to understand, explain, calculate, and predict the often nonintuitive observed behavior of droplets in microsystems. Microdrops and interfaces are now a common feature in most fluidic microsystems, from biology, to biotechnology, materials science, 3D-microelectronics, optofluidics, and mechatronics. On the other hand, the behavior of droplets and interfaces in today's microsystems is complicated and involves complex 3D geometrical considerations. From a numerical standpoint, the treatment of interfaces separating different immiscible phases is difficult. After a chapter dedicated to the general theory of wetting, this practical book successively details: The theory of 3D liquid interfaces The formulas for volume and surface of sessile and pancake droplets The behavior of sessile droplets The behavior of droplets between tapered plates and in wedges The behavior of droplets in microchannels The effect of capillarity with the analysis of capillary rise The onset of spontaneous capillary flow in open microfluidic systems The interaction between droplets, like engulfment The theory and application of electrowetting The state of the art for the approach of 3D-microelectronics using capillary alignment
Download or read book Engineering of Micro Nano Biosystems written by Gregory Barbillon and published by Springer. This book was released on 2019-08-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial book offers an in-depth overview of the fundamental principles of micro/nano technologies and devices related to sensing, actuation and diagnosis in fluidics and biosystems. Research in the MEMS/NEMS and lab-on-chip fields has seen rapid growth in both academic and industrial domains, as these biodevices and systems are increasingly replacing traditional large size diagnostic tools. This book is unique in describing not only the devices and technologies but also the basic principles of their operation. The comprehensive description of the fabrication, packaging and principles of micro/nano biosystems presented in this book offers guidance for researchers designing and implementing these biosystems across diverse fields including medical, pharmaceutical and biological sciences. The book provides a detailed overview of the fundamental mechanical, optical, electrical and magnetic principles involved, together with the technologies required for the design, fabrication and characterization of micro/nano fluidic systems and bio-devices. Written by a collaborative team from France and Korea, the book is suitable for academics, researchers, advanced level students and industrial manufacturers.
Download or read book Diffractive Optics and Optical Microsystems written by S. Martellucci and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 20th Course of the International School of Quantum Electronics held in Erice, Italy, November 14-24, 1996
Download or read book Micro Drops and Digital Microfluidics written by Jean Berthier and published by William Andrew. This book was released on 2012-12-31 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this 2nd edition of Micro-Drops and Digital Microfluidics, Jean Berthier explores the fundamentals and applications of digital microfluidics, enabling engineers and scientists to design this important enabling technology into devices and harness the considerable potential of digital microfluidics in testing and data collection. This book describes the most recent developments in digital microfluidics, with a specific focus on the computational, theoretical and experimental study of microdrops. Unique in its emphasis on digital microfluidics and with diverse applications ranging from drug delivery to point-of-care diagnostic chips, organic synthesis to microreactors, Micro-Drops and Digital Microfluidics meets the needs of audiences across the fields of bioengineering and biotechnology, and electrical and chemical engineering. Authoritative reporting on the latest changes in microfluidic science, where microscopic liquid volumes are handled as ""microdrops"" and separately from ""nanodrops." A methodical examination of how liquid microdrops behave in the complex geometries of modern miniaturized systems and interact with different morphological (micro-fabricated, textured) solid substrates A thorough explanation of how capillary forces act on liquid interfaces in contact with micro-fabricated surfaces Analysis of how droplets can be manipulated, handled, or transported using electric fields (electrowetting), acoustic actuation (surface acoustic waves), or by a carrier liquid (microflow) A fresh perspective on the future of microfluidics
Download or read book Surface tension and the spreading of liquids written by Roy Stanley Burdon and published by . This book was released on with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MEMS and Microsystems written by Tai-Ran Hsu and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology/Engineering/Mechanical A bestselling MEMS text...now better than ever. An engineering design approach to Microelectromechanical Systems, MEMS and Microsystems remains the only available text to cover both the electrical and the mechanical aspects of the technology. In the five years since the publication of the first edition, there have been significant changes in the science and technology of miniaturization, including microsystems technology and nanotechnology. In response to the increasing needs of engineers to acquire basic knowledge and experience in these areas, this popular text has been carefully updated, including an entirely new section on the introduction of nanoscale engineering. Following a brief introduction to the history and evolution of nanotechnology, the author covers the fundamentals in the engineering design of nanostructures, including fabrication techniques for producing nanoproducts, engineering design principles in molecular dynamics, and fluid flows and heat transmission in nanoscale substances. Other highlights of the Second Edition include: * Expanded coverage of microfabrication plus assembly and packaging technologies * The introduction of microgyroscopes, miniature microphones, and heat pipes * Design methodologies for thermally actuated multilayered device components * The use of popular SU-8 polymer material Supported by numerous examples, case studies, and applied problems to facilitate understanding and real-world application, the Second Edition will be of significant value for both professionals and senior-level mechanical or electrical engineering students.
Download or read book Microsystems and Nanotechnology written by Zhaoying Zhou and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Microsystems and Nanotechnology” presents the latest science and engineering research and achievements in the fields of microsystems and nanotechnology, bringing together contributions by authoritative experts from the United States, Germany, Great Britain, Japan and China to discuss the latest advances in microelectromechanical systems (MEMS) technology and micro/nanotechnology. The book is divided into five parts – the fundamentals of microsystems and nanotechnology, microsystems technology, nanotechnology, application issues, and the developments and prospects – and is a valuable reference for students, teachers and engineers working with the involved technologies. Professor Zhaoying Zhou is a professor at the Department of Precision Instruments & Mechanology , Tsinghua University , and the Chairman of the MEMS & NEMS Society of China. Dr. Zhonglin Wang is the Director of the Center for Nanostructure Characterization, Georgia Tech, USA. Dr. Liwei Lin is a Professor at the Department of Mechanical Engineering, University of California at Berkeley, USA.
Download or read book Microsystem Engineering of Lab on a chip Devices written by Oliver Geschke and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an interdisciplinary team of chemists, biologists and engineers from one of the leading European centers for microsystem research, MIC in Lyngby, Denmark, this book introduces and discusses the different aspects of (bio)chemical microsystem development. Unlike other, far more voluminous and theoretical books on this topic, this is a concise, practical handbook, dealing with analytical applications, particularly in the life sciences. Topics include: * microfluidics * silicon micromachining * glass and polymer micromachining * packaging * analytical chemistry illustrated with examples taken mainly from ongoing research projects at MIC.
Download or read book Micro Nano Technology Systems for Biomedical Applications written by Chih-Ming Ho and published by Oxford University Press. This book was released on 2010-03-25 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: In daily life, we are accustomed to working with length scales of feet or meters, but the building blocks from which our bodies are constructed are many orders of magnitude smaller. The technologies that are being developed to intervene at these minute scales have the potential to improve human health and significantly enrich our lives. Revolutionary micro/nano technology platforms have led to dramatic advances in sample preparation, analysis and cell culture. From the 1990s through to the very beginning of the twenty-first century, the focus was on the development of manufacturing technologies. Through elegant design and sophisticated fabrication, the micro- to nano-scale manipulation of fluids and particles has become routine. Since then, it has become possible to control molecular interactions at device surfaces, and optical manipulation, imaging and sensing techniques can also be incorporated. Micro/nano technology platforms are already being used to study and direct biological processes at the cellular and sub-cellular level, and to detect disease with greater sensitivity and specificity. The challenges and excitement in the near future will be in engineering these sophisticated, multifunctional devices to seamlessly interface with complex biological systems. Providing a clear guide that moves from molecules through devices to systems, this book reviews fundamental aspects of microfluidic devices, including fabrication, surface property control, pressure-driven and electrokinetic flow, and functions such as fluid mixing, particle sorting and molecular separations. The integration of optical and plasmonic imaging, optoelectronic tweezers for single particle manipulation, and optical and electrical signal transduction methods for biosensing are shown to provide extraordinary capabilities for bioanalytical and biomedical applications. These represent key areas of research that will lead to the next generation of micro/nano-based systems. Anyone working in this fast-changing field will benefit from this comprehensive review of the latest thinking, while researchers will find much to inspire and direct their work.
Download or read book Biomedical Microsystems written by Ellis Meng and published by CRC Press. This book was released on 2011-06-22 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poised to dramatically impact human health, biomedical microsystems (bioMEMS) technologies incorporate various aspects from materials science, biology, chemistry, physics, medicine, and engineering. Reflecting the highly interdisciplinary nature of this area, Biomedical Microsystems covers the fundamentals of miniaturization, biomaterials, microfabrication, and nanotechnology, along with relevant applications. Written by an active researcher who was recently named one of Technology Review’s Young Innovators Under 35, the book begins with an introduction to the benefits of miniaturization. It then introduces materials, fabrication technology, and the necessary components of all bioMEMS. The author also covers fundamental principles and building blocks, including microfluidic concepts, lab-on-a-chip systems, and sensing and detection methods. The final chapters explore several important applications of bioMEMS, such as microdialysis, catheter-based sensors, MEMS implants, neural probes, and tissue engineering. For readers with a limited background in MEMS and bioMEMS, this book provides a practical introduction to the technology used to make these devices, the principles that govern their operation, and examples of their application. It offers a starting point for understanding advanced topics and encourages readers to begin to formulate their own ideas about the design of novel bioMEMS. A solutions manual is available for instructors who want to convert this reference to classroom use.
Download or read book 4M 2005 First International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2005-12-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2005 - First International Conference on Multi-Material Micro Manufacture
Download or read book Microdevices and Microsystems for Cell Manipulation written by Aaron T. Ohta and published by MDPI. This book was released on 2018-07-03 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Microdevices and Microsystems for Cell Manipulation" that was published in Micromachines
Download or read book Microfluidics Based Microsystems written by S. Kakaç and published by Springer. This book was released on 2010-06-30 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an archival record of the NATO Advanced Study Institute on Microfluidics Based Microsystems – Fundamentals and App- cations held in Çe ?me-Izmir, Turkey, August 23–September 4, 2009. ASIs are intended to be high-level teaching activity in scientific and technical areas of current concern. In this volume, the reader may find interesting chapters and various microsystems fundamentals and applications. As the world becomes increasingly concerned with terrorism, early - spot detection of terrorist’s weapons, particularly bio-weapons agents such as bacteria and viruses are extremely important. NATO Public Diplomacy division, Science for Peace and Security section support research, Advanced Study Institutes and workshops related to security. Keeping this policy of NATO in mind, we made such a proposal on Microsystems for security. We are very happy that leading experts agreed to come and lecture in this important NATO ASI. We will see many examples that will show us Microfluidics usefulness for rapid diagnostics following a bioterrorism attack. For the applications in national security and anti-terrorism, microfluidic system technology must meet the challenges. To develop microsystems for security and to provide a comprehensive state-of-the-art assessment of the existing research and applications by treating the subject in considerable depth through lectures from eminent professionals in the field, through discussions and panel sessions are very beneficial for young scientists in the field.
