Download or read book Surface Production Operations Volume 2 written by Ken Arnold and published by Elsevier. This book was released on 1999-08-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as:* Heat recovery units* Kinetic inhibitors and anti-agglomerators* Trays and packing for distillation and absorption towers* Compressor valves* Foundation design considerations for reciprocating compressors* Pressure vessel issues and components * Nox reduction in engines and turbines* Safety management systemsThis book walks you through the equipment and processes used in gas-handling operations to help you design and manage a production facility. Production engineers will keep this volume on the desktop for the latest information on how to DESIGN, SPECIFY, and OPERATE gas-handling systems and facilities. The book allows engineers with little or background in production facility design to easily locate details about equipment, processes, and design parameters. With this volume, you will more completely comprehend the techniques of handling produced fluids from gas wells so your facility can be more efficient and productive.* Revised edition puts the most current information about gas-handling systems at your fingertips* Features brand new sections!
Download or read book Surface Production Operations Volume 5 Pressure Vessels Heat Exchangers and Aboveground Storage Tanks written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2021-07-22 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both upstream and downstream oil and gas facilities, Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks delivers a must-have reference guide to maximize efficiency, increase performance, prevent failures, and reduce costs. Every engineer and equipment manager in oil and gas must have complete knowledge of the systems and equipment involved for each project and facility, especially the checklist to keep up with maintenance and inspection--a topic just as critical as design and performance. Taking the guesswork out of searching through a variety of generalized standards and codes, Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks furnishes all the critical regulatory information needed for oil and gas specific projects, saving time and money on maintaining the lifecycle of mechanical integrity of the oil and gas facility. Including troubleshooting techniques, calculations with examples, and several significant illustrations, this critical volume within the Surface Production Operations series is crucial on every oil and gas engineer's bookshelf to solve day-to-day problems with common sense solutions. - Provides practical checklists and case studies for selection, installation, and maintenance on pressure vessels, heat transfer equipment, and storage tanks for all types of oil and gas facilities - Explains restoration techniques with detailed inspection and testing procedures, ensuring the equipment is revitalized to maximum life extension - Supplies comprehensive coverage on oil and gas specific American and European standards, codes and recommended practices, saving the engineer time searching for various publications
Download or read book Surface Production Operations Volume IV Pumps and Compressors written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2018-11-27 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over thirty years, the Surface Production Operations Series has taken the guess work out of the design, selection, installation, operation, testing, and troubleshooting of surface production equipment. The fourth volume in this series, Pumps and Compressors is directed to both entry-level personnel and practicing professionals looking for an up-to-date reference book on managing, evaluating, sizing, selecting, installing, operating and maintaining pump and compressor systems. Packed with examples drawn from years of design and field experience, this reference features many charts, tables, equations, diagrams, and photographs to illustrate the basic applications including pump hydraulics, centrifugal and reciprocating compressor applications, compressor performance maps, pump performance curves, pump and compressor testing and installation, and many more critical topics. Packed with practical solutions Surface Production Operations: Pumps and Compressors delivers an essential design and specification reference for today's engineers. - Covers application and performance considerations for all types of pumps and compressors - Delivers hands-on manual for applying mechanical and physical principles to select and design pump and compressor systems, supported by many tables and diagrams - Gives expert advice on how to apply design codes and standards such as API 610, API 674, ANSI B78.1, API 617, API 11P, API RP 14C and the Hydraulic Institute
Download or read book Surface Production Operations Volume III Facility Piping and Pipeline Systems written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2015-10-15 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Production Operations: Facility Piping and Pipeline Systems, Volume III is a hands-on manual for applying mechanical and physical principles to all phases of facility piping and pipeline system design, construction, and operation. For over twenty years this now classic series has taken the guesswork out of the design, selection, specification, installation, operation, testing, and trouble-shooting of surface production equipment. The third volume presents readers with a "hands-on" manual for applying mechanical and physical principles to all phases of facility piping and pipeline system design, construction, and operation. Packed with charts, tables, and diagrams, this authoritative book provides practicing engineer and senior field personnel with a quick but rigorous exposition of piping and pipeline theory, fundamentals, and application. Included is expert advice for determining phase states and their impact on the operating conditions of facility piping and pipeline systems; determining pressure drop and wall thickness; and optimizing line size for gas, liquid, and two-phase lines. Also included are a guide to applying international design codes and standards, and guidance on how to select the appropriate ANSI/API pressure-temperature ratings for pipe flanges, valves, and fittings. - Covers new and existing piping systems including concepts for expansion, supports, manifolds, pigging, and insulation requirements - Presents design principles for a pipeline pigging system - Teaches how to detect, monitor, and control pipeline corrosion - Reviews onshore and offshore safety and environmental practices - Discusses how to evaluate mechanical integrity
Download or read book Surface Production Operations Volume 1 written by Maurice Stewart and published by Elsevier. This book was released on 2011-03-31 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest edition of this best-selling title is updated and expanded for easier use by engineers. New to this edition is a section on the fundamentals of surface production operations taking up topics from the oilfield as originally planned by the authors in the first edition. This information is necessary and endemic to production and process engineers. Now, the book offers a truly complete picture of surface production operations, from the production stage to the process stage with applications to process and production engineers. - New in-depth coverage of hydrocarbon characteristics, the different kinds of reservoirs, and impurities in crude - Practical suggestions help readers understand the art and science of handling produced liquids - Numerous, easy-to-read figures, charts, tables, and photos clearly explain how to design, specify, and operate oilfield surface production facilities
Download or read book Surface Production Operations Vol 2 Design of Gas Handling Systems and Facilities written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2014-08-05 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and better than ever, Design of Gas-Handling Systems and Facilities, 3rd Edition includes greatly expanded chapters on gas-liquid separation, gas sweetening, gas liquefaction, and gas dehydration —information necessary and critical to production and process engineers and designers. Natural gas is at the forefront of today's energy needs, and this book walks you through the equipment and processes used in gas-handling operations, including conditioning and processing, to help you effectively design and manage your gas production facility. Taking a logical approach from theory into practical application, Design of Gas-Handling Systems and Facilities, 3rd Edition contains many supporting equations as well as detailed tables and charts to facilite process design. Based on real-world case studies and experience, this must-have training guide is a reference that no natural gas practitioner and engineer should be without. - Packed with charts, tables, and diagrams - Features the prerequisite ASME and API codes - Updated chapters on gas-liquid separation, gas sweetening, gas liquefaction and gas dehydration
Download or read book Standard Handbook of Petroleum and Natural Gas Engineering Volume 1 written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996-10-16 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineering now has its own true classic handbook that reflects the profession's status as a mature major engineering discipline. Formerly titled the Practical Petroleum Engineer's Handbook, by Joseph Zaba and W.T. Doherty (editors), this new, completely updated two-volume set is expanded and revised to give petroleum engineers a comprehensive source of industry standards and engineering practices. It is packed with the key, practical information and data that petroleum engineers rely upon daily. The result of a fifteen-year effort, this handbook covers the gamut of oil and gas engineering topics to provide a reliable source of engineering and reference information for analyzing and solving problems. It also reflects the growing role of natural gas in industrial development by integrating natural gas topics throughout both volumes. More than a dozen leading industry experts-academia and industry-contributed to this two-volume set to provide the best , most comprehensive source of petroleum engineering information available.
Download or read book Surface Production Operations written by Maurice Stewart and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Produced Water Treatment Field Manual written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2011-08-08 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of Filter Types P.148
Download or read book Surface Production Operations Volume 1 written by Ken Arnold and published by Gulf Professional Publishing. This book was released on 1998-03-30 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this volume's clear presentation, you will understand the basic concepts and techniques needed to DESIGN, SPECIFY, and OPERATE oilfield surface production facilities and operations
Download or read book Petroleum and Gas Field Processing written by H.K. Abdel-Aal and published by CRC Press. This book was released on 2003-07-03 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The immediate product extracted from oil and gas wells consists of mixtures of oil, gas, and water that is difficult to transport, requiring a certain amount of field processing. This reference analyzes principles and procedures related to the processing of reservoir fluids for the separation, handling, treatment, and production of quality petroleum oil and gas products. It details strategies in equipment selection and system design, field development and operation, and process simulation and control to increase plant productivity and safety and avoid losses during purification, treatment, storage, and export. Providing guidelines for developing efficient and economical treatment systems, the book features solved design examples that demonstrate the application of developed design equations as well as review problems and exercises of key engineering concepts in petroleum field development and operation.
Download or read book Petroleum Production Systems written by Michael J. Economides and published by Pearson Education. This book was released on 2013 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by four leading experts, this edition thoroughly introduces today's modern principles of petroleum production systems development and operation, considering the combined behaviour of reservoirs, surface equipment, pipeline systems, and storage facilities. The authors address key issues including artificial lift, well diagnosis, matrix stimulation, hydraulic fracturing and sand control. They show how to optimise systems for diverse production schedules using queuing theory, as well as linear and dynamic programming. Throughout, they provide both best practices and rationales, fully illuminating the exploitation of unconventional oil and gas reservoirs. Updates include: Extensive new coverage of hydraulic fracturing, including high permeability fracturing New sand and water management techniques * An all-new chapter on Production Analysis New coverage of digital reservoirs and self-learning techniques New skin correlations and HW flow techniques
Download or read book Command Of The Air written by General Giulio Douhet and published by Pickle Partners Publishing. This book was released on 2014-08-15 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the pantheon of air power spokesmen, Giulio Douhet holds center stage. His writings, more often cited than perhaps actually read, appear as excerpts and aphorisms in the writings of numerous other air power spokesmen, advocates-and critics. Though a highly controversial figure, the very controversy that surrounds him offers to us a testimonial of the value and depth of his work, and the need for airmen today to become familiar with his thought. The progressive development of air power to the point where, today, it is more correct to refer to aerospace power has not outdated the notions of Douhet in the slightest In fact, in many ways, the kinds of technological capabilities that we enjoy as a global air power provider attest to the breadth of his vision. Douhet, together with Hugh “Boom” Trenchard of Great Britain and William “Billy” Mitchell of the United States, is justly recognized as one of the three great spokesmen of the early air power era. This reprint is offered in the spirit of continuing the dialogue that Douhet himself so perceptively began with the first edition of this book, published in 1921. Readers may well find much that they disagree with in this book, but also much that is of enduring value. The vital necessity of Douhet’s central vision-that command of the air is all important in modern warfare-has been proven throughout the history of wars in this century, from the fighting over the Somme to the air war over Kuwait and Iraq.
Download or read book The Goal written by Eliyahu M. Goldratt and published by Routledge. This book was released on 2016-08-12 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alex Rogo is a harried plant manager working ever more desperately to try and improve performance. His factory is rapidly heading for disaster. So is his marriage. He has ninety days to save his plant - or it will be closed by corporate HQ, with hundreds of job losses. It takes a chance meeting with a colleague from student days - Jonah - to help him break out of conventional ways of thinking to see what needs to be done. Described by Fortune as a 'guru to industry' and by Businessweek as a 'genius', Eliyahu M. Goldratt was an internationally recognized leader in the development of new business management concepts and systems. This 20th anniversary edition includes a series of detailed case study interviews by David Whitford, Editor at Large, Fortune Small Business, which explore how organizations around the world have been transformed by Eli Goldratt's ideas. The story of Alex's fight to save his plant contains a serious message for all managers in industry and explains the ideas which underline the Theory of Constraints (TOC) developed by Eli Goldratt. Written in a fast-paced thriller style, The Goal is the gripping novel which is transforming management thinking throughout the Western world. It is a book to recommend to your friends in industry - even to your bosses - but not to your competitors!
Download or read book Petroleum Production Engineering written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2017-02-10 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today's more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today's production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. - Updated to cover today's critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers - Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting - Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
