Download or read book Surface Mining Technology written by Mostafa Mohamed Ali Elbeblawi and published by Springer Nature. This book was released on 2021-07-31 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a brief history and a general overview of the state of surface mining technology with topics ranging from the principles to surface mining methods, systems, and pit planning design. It starts with the definition of surface mine and ends with land reclamation and mine closure. The following chapters address the basics of mineral economics, calculation of stripping ratio; exploitation of difficult parts of ore deposits, slope stability, controlling falls and slides in the surface mines, sorts of freight traffic, scrapers, bulldozers, and loaders. The book serves as a reference text for mining students, engineers, and geologists.
Download or read book Surface Mining Second Edition written by Bruce A. Kennedy and published by SME. This book was released on 1990 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SME classic is both a reference book for the working engineer and a textbook for the mining student. This hardcover edition gives a brief history of surface mining and a general overview of the state of surface mining today--topics range from production and productivity to technological developments and trends in equipment. This extremely useful text takes the approach that exploration and mining geologists must be expert in a number of fields, including basic finance and economics, logistics, and pragmatic prospecting. Readers will find material on all these topics and more. The book's nine chapters include: Introduction, Exploration and Geology Techniques, Ore Reserve Estimation, Feasibility Studies and Project Financing, Planning and Design of Surface Mines, Mine Operations, Mine Capital and Operating Costs, Management and Organization, and Case Studies. The book is fully indexed.
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Mine Winding and Transport written by S.C. Walker and published by Elsevier. This book was released on 2012-12-02 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Changes in size and power of available mining transport equipment, combined with improved means of control involving leaky feeder radio and computers, demands a new look at the problem of mine winding and transport. Such changes require the traditional mining engineer to have a much greater engineering application. This book is intended to satisfy that requirement.All the important means of transporting operatives and minerals are addressed, both below ground and on the surface. Safe, speedy and economic transport from the point of mineral extraction to leaving the mine is paramount. This work covers all aspects of the problem including: (1) the design and application of steel wire ropes to a variety of industrial applications, and the various drums and pulleys necessary; (2) a ready means of calculating output/throughput of various transport modes, and relating such to their power requirement; and (3) information on transport modes that enables the most suitable system for given conditions to be determined.A ``first principle'' approach has been adopted throughout, and extensive use of practical examples allows the solution of virtually all associated problems. Although formulae are used where necessary for an understanding of the content, the numerous tables included enable the practicing engineer to make short cuts to more quickly solve particular problems. In addition, the provision of a considerable number of operational constants, many not previously published, enable a more speedy and accurate solution to be effected. By comparing the calculated solutions to a particular problem, the most economic transport mode may be determined.Mining, mechanical and electrical engineers concerned with the safe movement of men or material will find this book of particular use, as will the student preparing for examinations on the subject.
Download or read book Introductory Mining Engineering written by Howard L. Hartman and published by John Wiley & Sons. This book was released on 2002-08-09 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory text and reference on mining engineering highlighting the latest in mining technology Introductory Mining Engineering outlines the role of the mining engineer throughout the life of a mine, including prospecting for the deposit, determining the site's value, developing the mine, extracting the mineral values, and reclaiming the land afterward. This Second Edition is written with a focus on sustainability-managing land to meet the economic and environmental needs of the present while enhancing its ability to also meet the needs of future generations. Coverage includes aboveground and underground methods of mining for a wide range of substances, including metals, nonmetals, and fuels. Completely up to date, this book presents the latest information on such technologies as remote sensing, GPS, geophysical surveying, and mineral deposit evaluation, as well as continuous integrated mining operations and autonomous trucks. Also included is new information on landscape restoration, regional planning, wetlands protection, subsidence mitigation, and much more. New chapters include coverage of: * Environmental responsibilities * Regulations * Health and safety issues Generously supplemented with more than 200 photographs, drawings, and tables, Introductory Mining Engineering, Second Edition is an indispensable book for mining engineering students and a comprehensive reference for professionals.
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Principles and Practices of Modern Coal Mining written by R. D. Singh and published by New Age International. This book was released on 2005 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles And Practices Of Modern Coal Mining Is A Comprehensive Text Book On The Theory And Practice Of Coal Mining. It Highlights The Principles And Describes The Modern Techniques Of Surface And Underground Coal Mining Citing Examples From India And Abroad. It Deals With The Exploitation Of Coal Seams Of Different Thicknesses And Dips Occurring In A Variety Of Conditions. Emerging Technologies Of Coal Mining And Their Applications Have Also Been Amply Discussed.After An Introductory Chapter Tracing The History Of Coal Mining And The Development Of Coal Mining Industry In Different Principal Coal ProducingCountries And Highlighting The Emerging Technologies Of Coal Mining The World Over, The Book Offers A Chapter By Chapter Discussion Of The State Of Art Of Underground And Surface Coal Mining Technology.Every Aspect Of Science Of Coal Mining From Geological Occurrence And Exploration To Planning And Exploitation Of Coal Seams, Including Management Of Environment Has Been Scrutinised By The Author. For The Professionals In The Coal Industry As Well As To The Planners, Researchers And Students Of Mining Engineering, The Book Will Be A Useful Reference.
Download or read book Rotary Drilling and Blasting in Large Surface Mines written by Bhalchandra V. Gokhale and published by CRC Press. This book was released on 2010-12-14 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: In large surface mining operations, drilling and blasting activities constitute more than 15% of the total costs. In order to optimize performance and minimize costs, a thorough knowledge of drill and blast operations is, therefore, extremely important.In this unique reference volume, rotary blasthole drilling and surface blasting, as applied in la
Download or read book Mine Planning and Equipment Selection written by Carsten Drebenstedt and published by Springer Science & Business Media. This book was released on 2013-10-16 with total page 1464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume includes all papers presented at the 22nd International Conference on Mine Planning and Equipment Selection (MPES), Dresden, Germany, 2013. Mineral Resources are needed for almost all processes of modern life, whilst the mining industry is facing strict requirements regarding efficiency and sustainability. The research papers in this volume deal with the latest developments and research results in the fields of mining, machinery, automatization and environment protection.
Download or read book Progressive Technologies of Coal Coalbed Methane and Ores Mining written by Volodymyr Bondarenko and published by CRC Press. This book was released on 2014-08-11 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting new technologies in underground coal extraction, with special attention to mine galleries support and maintenance, load mechanism of "massif-support system-safety system" systems, analysis of face equipment for thin coal seams mining and substantiation of rational stoping parameters. Advanced surface mining technologies of coal and ore a
Download or read book Underground Mining Methods written by W. A. Hustrulid and published by SME. This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Mining Methods presents the latest principles and techniques in use today. Reflecting the international and diverse nature of the industry, a series of mining case studies is presented covering the commodity range from iron ore to diamonds extracted by operations located in all corners of the world. Industry experts have contributed 77 chapters. This book is certain to become a standard for every practicing mining engineer and student alike. Sections include: General Mine Design Considerations, Room-and-Pillar Mining of Hard Rock/Soft Rock, Longwall Mining of Hard Rock, Shrinkage Stoping, Sublevel Stoping, Cut-and-Fill Mining, Sublevel Caving, Panel Caving, Foundations for Design, and Underground Mining Looks to the Future.
Download or read book SME Mining Engineering Handbook Third Edition written by Peter Darling and published by SME. This book was released on 2011 with total page 1912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the SME Mining Engineering Handbook reaffirms its international reputation as "the handbook of choice" for today's practicing mining engineer. It distills the body of knowledge that characterizes mining engineering as a disciplinary field and has subsequently helped to inspire and inform generations of mining professionals.Virtually all of the information is original content, representing the latest information from more than 250 internationally recognized mining industry experts. Within the handbook's 115 thought-provoking chapters are current topics relevant to today's mining professional: Analyzing how the mining and minerals industry will develop over the medium and long term--why such changes are inevitable, what this will mean in terms of challenges, and how they could be managed Explaining the mechanics associated with the multifaceted world of mine and mineral economics, from the decisions associated with how best to finance a single piece of high-value equipment to the long-term cash-flow issues associated with mine planning at a mature operation Describing the recent and ongoing technical initiatives and engineering developments in relation to robotics, automation, acid rock drainage, block caving optimization, or process dewatering methods Examining in detail the methods and equipment available to achieve efficient, predictable, and safe rock breaking, whether employing a tunnel boring machine for development work, mineral extraction using a mobile miner, or cast blasting at a surface coal operation Identifying the salient points that dictate which is the safest, most efficient, and most versatile extraction method to employ, as well as describing in detail how each alternative is engineered Discussing the impacts that social and environmental issues have on mining from the pre-exploration phase to end-of-mine issues and beyond, and how to manage these two increasingly important factors to the benefit of both the mining companies and other stakeholders
Download or read book Superfund and Mining Megasites written by National Research Council and published by National Academies Press. This book was released on 2005-12-29 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 100 years, the Coeur d' Alene River Basin has been known as "The Silver Valley" for being one of the most productive silver, lead, and zinc mining areas in the United States. Over time, high levels of metals (including lead, arsenic, cadmium, and zinc) were discovered in the local environment and elevated blood lead levels were found in children in communities near the metal-refining and smelter complex. In 1983, the U.S. Environmental Protection Agency (EPA) listed a 21-square mile mining area in northern Idaho as a Superfund site. EPA extended those boundaries in 1998 to include areas throughout the 1500-square mile area Coeur d'Alene River Basin project area. Under Superfund, EPA has developed a plan to clean up the contaminated area that will cost an estimated $359 million over 3 decades-and this effort is only the first step in the cleanup process. Superfund and Mining Megasites: Lessons from Coeur d'Alene River Basin evaluates the issues and concerns that have been raised regarding EPA's decisions about cleaning up the area. The scientific and technical practices used by EPA to make decisions about human health risks at the Coeur d'Alene River Basin Superfund site are generally sound; however, there are substantial concerns regarding environmental protection decisions, particularly dealing with the effectiveness of long-term plans.
Download or read book Legislation Technology and Practice of Mine Land Reclamation written by Zhenqi Hu and published by CRC Press. This book was released on 2014-09-23 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legislation, Technology and Practice of Mine Land Reclamation contains the proceedings of the Beijing International Symposium on Land Reclamation and Ecological Restoration (LRER 2014, Beijing, China, 16-19 October 2014). The contributions cover a wide range of topics: - Monitoring, prediction and assessment of environmental damage in mining areas - Subsidence land reclamation and ecological restoration - Soil, vegetation and biological diversity - Mining methods and measures for minimization of land and environmental damage - Solid wastes and AMD treatment - Contaminated land remediation - Land reclamation and ecological restoration policies and management - Surface mined land reclamation and ecological restoration - Case study on mining reclamation and ecological restoration Legislation, Technology and Practice of Mine Land Reclamation will be of interest to engineers, scientists, consultants, government officials and students involved in environmental engineering, soil science, ecology, forestry, mining, and land reclamation and ecological restoration in mining areas.
Download or read book Advanced Analytics in Mining Engineering written by Ali Soofastaei and published by Springer Nature. This book was released on 2022-02-23 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Dr. Soofastaei and his colleagues reveal how all mining managers can effectively deploy advanced analytics in their day-to-day operations- one business decision at a time. Most mining companies have a massive amount of data at their disposal. However, they cannot use the stored data in any meaningful way. The powerful new business tool-advanced analytics enables many mining companies to aggressively leverage their data in key business decisions and processes with impressive results. From statistical analysis to machine learning and artificial intelligence, the authors show how many analytical tools can improve decisions about everything in the mine value chain, from exploration to marketing. Combining the science of advanced analytics with the mining industrial business solutions, introduce the “Advanced Analytics in Mining Engineering Book” as a practical road map and tools for unleashing the potential buried in your company’s data. The book is aimed at providing mining executives, managers, and research and development teams with an understanding of the business value and applicability of different analytic approaches and helping data analytics leads by giving them a business framework in which to assess the value, cost, and risk of potential analytical solutions. In addition, the book will provide the next generation of miners – undergraduate and graduate IT and mining engineering students – with an understanding of data analytics applied to the mining industry. By providing a book with chapters structured in line with the mining value chain, we will provide a clear, enterprise-level view of where and how advanced data analytics can best be applied. This book highlights the potential to interconnect activities in the mining enterprise better. Furthermore, the book explores the opportunities for optimization and increased productivity offered by better interoperability along the mining value chain – in line with the emerging vision of creating a digital mine with much-enhanced capabilities for modeling, simulation, and the use of digital twins – in line with leading “digital” industries.
Download or read book Elements of Mining Technology Vol 1 8th Edition written by Deshmukh D.J. and published by . This book was released on 2010-01-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: 1. Mining Geology Minerals, Rocks and Rock Structures. 2. Coal and Coalfields of India. 3. Boring. 4. Shaft Shinking. 5. Opencast Mining. 6. Access to Mineral Deposits and Pit Bottom, Pit-Top Layouts. 7. Drivage of Roads in Coal and Stone. 8. Explosives, Accessories and Blasting Practice. 9. Rock Mechanics and Roof Supports. 10. Stowing Pracice. 11. Bord and Pillar Method of Working Coal Development. 12. Pillar Extraction in Bord and Pillar. 13. Longwall and other methods of working. 14. Thick Seam Working.
Download or read book Surface Mining Machines written by Eugeniusz Rusiński and published by Springer. This book was released on 2017-01-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.
