Download or read book Surface Initiated Polymerisation for Applications in Materials Science written by Bocheng Zhu and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic study of the surface-initiated polymerisation kinetics of a relatively new type of atom transfer radical polymerisation (ATRP), activators regenerated by electron transfer (ARGET) ATRP, is first demonstrated in this report. Poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(methyl methacrylate) (PMMA) were successfully grown from silicon surfaces at room temperature by surface-initiated ARGET ATRP using a "3rd generation" cationic macroinitiator. The polymer films were analysed by ellipsometry, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). With the initial experiment showing that water accelerated conventional ATRP but made it less controlled, the effect of solvent on ARGET ATRP was also evaluated. The living character of ARGET ATRP was demonstrated by successfully reinitiating PHEMA-grafted silicon wafers to grow a second block of PHEMA. Initiator density was shown to have a great effect on the growth rate of PHEMA film thickness on silicon surfaces by comparing the ARGET ATRP growth of PHEMA films using two different initiators, "1st generation" and "3rd generation" cationic macroinitiators, which have different ratios of initiating groups to positive charge. Another type of initiator for ATRP systems, an amide silane, was then investigated as an alternative to polyelectrolyte macroinitiators to avoid degrafting. The effects of solvent, 2, 2' bipyridyl (bpy) ligand concentration and different types of reducing agent on the growth of PHEMA film from amide-initiator coated silicon wafers by ARGET ATRP were then explored at room temperature. However, it was found that the swings in the uncontrolled laboratory ambient temperature caused inter-sample and inter-experiment variability and so could make the evaluations inaccurate or even wrong. An investigation of temperature on ARGET ATRP showed a dramatic effect on the polymerisation rate. The higher the temperature, the faster the polymerisation proceeded. Therefore, the effects of solvent, ratio of bpy to Cu and reducing agent on the ARGET ATRP growth of PHEMA brushes from amide initiator-coated silicon wafers were re-evaluated at a constant temperature, 30 °C. The development of a polydopamine-based initiator, which was designed to be able to be immobilised on a wide range of surfaces, is then presented in this report. Polydopamine was first shown to be able to deposit on various types of material surfaces by oxidative polymerisation in aqueous solution. Bromoester initiating groups for ATRP systems were incorporated into polydopamine coatings by reacting a fraction of the dopamine monomer with 2-bromoisobutyryl bromide (BIBB) before polymerisation. The modified polydopamine initiator film grew at a comparable rate to unmodified polydopamine, with a 45 nm being grown in 24 hours. Successful incorporation of initiator groups was confirmed by XPS and FTIR, and by the growth of PMMA and PHEMA polymer brushes by ARGET ATRP from the polydopamine initiator coatings. A PMMA brush with a thickness of 239 nm was grown in 72 hours, indicating that the grafting density is sufficiently high to be in the brush regime. This initiator was demonstrated to be able to deposit on a range of substrates, such as metals (steel) and polymers (polystyrene), and successfully initiate polymer growth, demonstrating its broad applicability. The assessment of ARGET ATRP as a simple and effective tool for interfacial shear strength improvement in cellulose-based fibre reinforced thermoplastic composites is finally presented. It was demonstrated by control experiments that grafting polystyrene on glass fibre surfaces via ARGET ATRP greatly improved the interfacial adhesion between glass fibres and a high-impact polystyrene (HIPS) matrix, although a specific value of interfacial strength was not obtained due to failure of the modified glass fibre composite samples in areas other than the interface. It was then demonstrated that PMMA was successfully grown from the surfaces of polydopamine initiator coated cotton fibre and BIBB-modified cotton fibre by ARGET ATRP. Polydopamine initiator was shown to be a better initiator for cotton fibre than BIBB, possibly since the adsorbed water on cotton fibres can react with BIBB. The improvement of interfacial adhesion between cotton fibres and a PMMA matrix by grafting PMMA on the cotton surface was assessed by peel testing of cotton fibres pressed into PMMA sheets. There is a clear trend in the relationship between the peeling force and growth time of PMMA on the cotton fibre by ARGET ATRP, although the inter-sample reproducibility is not good.
Download or read book Surface Initiated Polymerization I written by Rainer Jordan and published by Springer Science & Business Media. This book was released on 2006-03-02 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Y. Tsujii, K. Ohno, S. Yamamoto, A. Goto, T. Fukuda: Structure and Properties of High-Density Polymer Brushes Prepared by Surface-Initiated Living Radical Polymerization.- 2 D.J. Dyer: Photoinitiated Synthesis of Grafted Polymers.- 3 T. Matsuda: Photoiniferter-Driven Precision Surface Graft Microarchitectures for Biomedical Applications.- 4 R. Advincula: Polymer Brushes by Anionic and Cationic Surface Initiated Polymerization.- 5 M.R. Buchmeiser: Metathesis Polymerization From and To Surfaces.-
Download or read book Polymer and Biopolymer Brushes written by Omar Azzaroni and published by John Wiley & Sons. This book was released on 2018-01-11 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serves as a guide for seasoned researchers and students alike, who wish to learn about the cross-fertilization between biology and materials that is driving this emerging area of science This book covers the most relevant topics in basic research and those having potential technological applications for the field of biopolymer brushes. This area has experienced remarkable increase in development of practical applications in nanotechnology and biotechnology over the past decade. In view of the rapidly growing activity and interest in the field, this book covers the introductory features of polymer brushes and presents a unifying and stimulating overview of the theoretical aspects and emerging applications. It immerses readers in the historical perspective and the frontiers of research where our knowledge is increasing steadily—providing them with a feeling of the enormous potential, the multiple applications, and the many up-and-coming trends behind the development of macromolecular interfaces based on the use of polymer brushes. Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials offers chapters on: Functionalization of Surfaces Using Polymer Brushes; Polymer Brushes by ATRP and Surface-Mediated RAFT Polymerization for Biological Functions; Electro-Induced Copper Catalyzed Surface Modification with Monolayer and Polymer Brush; Polymer Brushes on Flat and Curved Substrates; Biomimetic Anchors for Antifouling Polymer Brush Coating; Glycopolymer Brushes Presenting Sugars in Their Natural Form; Smart Surfaces Modified with Phenylboronic Acid-Containing Polymer Brushes; DNA Brushes; Polymer Brushes as Interfacial Materials for Soft Metal Conductors and Electronics; and more. Presents a comprehensive theory/simulation section that will be valuable for all readers Includes chapters not only on the biological applications of polymer brushes but also on biological systems that resemble polymer brushes on flat surfaces Addresses applications in coatings, friction, sensors, microelectromechanical systems, and biomaterials Devotes particular attention to the functional aspects of hybrid nanomaterials employing polymer brushes as functional units Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials is aimed at both graduate students and researchers new to this subject as well as scientists already engaged in the study and development of polymer brushes.
Download or read book Surface Initiated Polymerization II written by Rainer Jordan and published by Springer Science & Business Media. This book was released on 2006-03-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by numerous experts
Download or read book Polymer Brushes written by Rigoberto C. Advincula and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists, polymer chemists, surface physicists and materials engineers will find this book a complete and detailed treatise on the field of polymer brushes, their synthesis, characterization and manifold applications. In a first section, the various synthetic pathways and different surface materials are introduced and explained, followed by a second section covering important aspects of characterization and analysis in both flat surfaces and particles. These specific surface initiated polymerization (SIP) systems such as linear polymers, homopolymers, block copolymers, and hyperbranched polymers are unique compared to previously reported systems by chemisorption or physisorption. They have found their way in both large-scale and miniature applications of polymer brushes, which is covered in the last section. Such 'hairy' surfaces offer fascinating opportunities for addressing numerous problems of both academic and, in particular, industrial interest: high-quality, functional or protective coatings, composite materials, surface engineered particles, metal-organic interfaces, biological applications, micro-patterning, colloids, nanoparticles, functional devices, and many more. It is the desire of the authors that this book will be of benefit to readers who want to "brush-up on polymers".
Download or read book Functional Polymers written by Raja Shunmugam and published by CRC Press. This book was released on 2017-05-08 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers the synthetic as well application aspects of functional polymers. It highlights modern trends in the field and showcases the recent characterization techniques that are being employed in the field of polymer science. The chapters are written by top-notch scientists who are internationally recognized in the field. The chapters will highlight the modern trend in the field.
Download or read book Organic Inorganic Hybrid Nanomaterials written by Susheel Kalia and published by Springer. This book was released on 2014-12-04 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Surface Initiated Polymerization II written by Rainer Jordan and published by Springer. This book was released on 2006-03-02 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by numerous experts
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Controlled and Living Polymerizations written by Krzysztof Matyjaszewski and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a highly prestigious and knowledgeable team of top scientists in the field, this book provides an overview of the current status of controlled/living polymerization, combining the synthetic, mechanistic and application-oriented aspects. From the contents: * Anionic Vinyl Polymerization * Carbocationic Polymerization * Radical Polymerization * Coordinative Polymerization of Olefins * Ring-Opening Polymerization of Heterocycles * Ring-Opening Metathesis Polymerization * Macromolecular Architectures * Complex Functional Macromolecules * Synthesis of Block and Graft Copolymers * Bulk and Solution Structures of Block Copolymers * Industrial Applications While some of the material is based on chapters taken from the four-volume work "Macromolecular Engineering", it is completely updated and rewritten to reflect the focus of this monograph. Must-have knowledge for polymer and organic chemists, plastics technologists, materials scientists and chemical engineers.
Download or read book Polymer Surface Modification written by K. L. Mittal and published by BRILL. This book was released on 2009-02-28 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces. This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers. The topics covered include: various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces. In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.
Download or read book Progress in Controlled Radical Polymerization Materials and Applications written by Krzysztof Matyjaszewski and published by OUP USA. This book was released on 2012-09-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on recent progress in the rapidly developing field of controlled/living radical polymerization.
Download or read book Handbook of Vinyl Polymers written by Munmaya Mishra and published by CRC Press. This book was released on 2008-07-24 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radical polymerization is one of the most widely used means of producing vinyl polymers, supporting a myriad of commercial uses. Maintaining the quality of the critically acclaimed first edition, the Handbook of Vinyl Polymers: Radical Polymerization, Process, and Technology, Second Edition provides a fully updated, single-volume source on the chemistry, technology, and applications of vinyl polymers. Emphasizes radical initiating systems and mechanisms of action... Written by renowned researchers in the field, this handbook is primarily concerned with the physical and organic chemistry of radical vinyl polymerization. The authors survey the most recent advances, processing methods, technologies, and applications of free radical vinyl polymerization. The book features thorough coverage of polymer functionalization, photo initiation, block and graft copolymers, and polymer composites. Analyzes living/controlled radical polymerization, one of the latest developments in the field... Combining fundamental aspects with the latest advances, processing methods, and applications in free radical vinyl polymerization and polymer technology, this invaluable reference provides a unified, in-depth, and innovative perspective of radical vinyl polymerization.
Download or read book Nitroxide Mediated Polymerization written by Didier Gigmes and published by Royal Society of Chemistry. This book was released on 2015-12-08 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitroxide-mediated polymerization is an important branch of controlled radical polymerization, which has revolutionised the preparation of polymer architectures and compositions. This is the first book dedicated to the topic and covers the history and development of nitroxide-mediated polymerization, as well as current techniques of academic and industrial interest. Nitroxide-Mediated Polymerization gathers together and comprehensively discusses all aspects of nitroxide-mediated polymerization, from fundamental principles through to industrial applications. A specific focus will be dedicated to the principle of the technique, its kinetics aspects, the synthesis of the controlling agents, the range of polymerizable monomers, its potential for preparation of advanced organic and hybrid materials and its status at the industrial stage. The book details all stages of the field, with chapters detailing the history, recent developments and novel materials in this fast developing area. Edited and written by expert researchers working in the field and academia this book focuses on highlighting the kinetic aspects of nitroxide-mediated polymerization, providing insight into the kinetics that can sometimes be hard to follow in published papers. The book will be of interest to polymer chemists and materials scientists at graduate level and above.
Download or read book Polymer Brushes written by Vikas Mittal and published by CRC Press. This book was released on 2012-03-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Brushes: Substrates, Technologies, and Properties covers various aspects of polymer brush technology, including synthesis, properties, performance, and applications. It presents both experimental details and theoretical insights to enable a better understanding of the brush system. After an overview of polymer brush systems, the book discusses methods for grafting organic brushes from the surface of clay platelets and for the covalent grafting of PNIPAm brushes. It then describes ferrocene polymer brushes, nonfouling brushes on poly(ethylene terephthalate) film surfaces, brushes formed on the inner surface of cylindrical pores, and the "zipper brush" approach. The authors examine the use of scanning electrochemical microscopy for analyzing brushes and compare surface-controlled atom transfer radical polymerization and surface-controlled single-electron transfer living radical polymerization. They also explore the application of polymer brushes in the chromatographic separations of viruses and proteins and the suppression of proteins and cell adhesions. The text concludes with a look at how polymer brushes are synthesized by surface-initiated iniferter-mediated polymerization. This book provides a one-stop reference on the various substrates and technologies used to synthesize polymer brushes. The hands-on information in the text will help readers choose the proper synthesis methods and materials for their system.
Download or read book Nitroxide Mediated Polymerization written by Didier Gigmes and published by Royal Society of Chemistry. This book was released on 2016 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book dedicated to nitroxide-mediated polymerization and covers the history and development of NMP, as well as current techniques of academic and industrial interest.
Download or read book Surface Initiated Polymerization I written by Rainer Jordan and published by Springer. This book was released on 2006-03-02 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
