Download or read book Surface Engineering of Biomaterials written by Saber Amin Yavari and published by . This book was released on 2020-08-31 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acceptance or rejection of implanted biomaterials is strongly dependent on an appropriate bio-interface between the biomaterial and its surrounding tissue. Given the fact that most bulk materials only provide mechanical stability for the implant and may not interact with tissues and fluids in vivo, surface modification and engineering of biomaterials plays a significant role towards addressing major clinical unmet challenges. Increasing data showed that altering surface properties including physiochemical, topographical, and mechanical characteristics, is a promising approach to tackle these problems. Surface engineering of biomaterials could influence the subsequent tissue and cellular events such as protein adsorption, cellular recolonization, adhesion, proliferation, migration, and the inflammatory response. Moreover, it could be based on mimicking the complex cell structure and environment or hierarchical nature of the bone. In this case, the design of nano/micrometer patterns and morphologies with control over their properties has been receiving the attention of biomaterial scientists due to the promising results for the relevant biomedical applications. This Special Issue presents original research papers that report on the current state-of-the-art in surface engineering of biomaterials, particularly implants and biomedical devices.
Download or read book Introduction to Biomaterials written by J. L. Ong and published by Cambridge University Press. This book was released on 2014 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: A succinct introduction to the field of biomaterials engineering, packed with practical insights.
Download or read book Surface Engineering of Polymeric Biomaterials written by Todorka G Vladkova and published by Smithers Rapra. This book was released on 2013-01-10 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials work in contact with living matter and this gives a number of specific requirements for their surface properties, such as bioinertness or bioactivity, antibiofouling, and so on. Surface engineering based on physical, chemical, physical-chemical, biochemical or biological principles is important for the preparation of biomaterials with the desired biocontact properties. This book helps the reader gain the knowledge to enable them to work in such a rapidly developing area, with a comprehensive list of references given for each chapter. Strategies for tailoring the biological response through the creation of biomaterial surfaces resistant to fouling are discussed. Methods of eliciting specific biomolecular interactions that can be further combined with patterning techniques to engineer adhesive areas in a noninteractive background are also covered. The theoretical basis of surface engineering for improvement of biocontact properties of polymeric biomaterials as well as the current state-of-the-art of the surface engineering of polymeric biomaterials are presented. The book also includes information on the most used conventional and advanced surface engineering methods. The book is targeted at researchers, post-doctorates, graduate students, and those already working in the field of biomaterials with a special interest in the creation of polymeric materials with improved biocontact properties via surface engineering.
Download or read book Surface Engineering of Biomaterials written by Ajit Behera and published by CRC Press. This book was released on 2024-03-20 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering provides one of the most important means of engineering product differentiation in terms of quality, performance, and lifecycle cost. It is essential to achieve predetermined functional properties of materials such as mechanical strength, biocompatibility, corrosion resistance, wear resistance, and heat and oxidation resistance. Surface Engineering of Biomaterials addresses this topic across a diverse range of process technologies and healthcare applications. Introduces biomaterial surface science and surface engineering and includes criteria for biomaterial surface selection Focuses on a broad array of materials including metals, ceramics, polymers, alloys, and composites Discusses corrosion, degradation, and material release issues in implant materials Covers various processing routes to develop biomaterial surfaces, including for smart and energy applications Details techniques for post-modification of biomaterial surfaces This reference work helps researchers working at the intersection of materials science and biotechnology to engineer functional biomaterials for a variety of applications.
Download or read book Nanoscale Engineering of Biomaterials Properties and Applications written by Lalit M. Pandey and published by Springer Nature. This book was released on 2022-02-16 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in a wide range of biomaterials for the development of smart and advanced functional materials. It discusses the fundamentals of bio-interfacial interactions and the surface engineering of emerging biomaterials like metals and alloys, polymers, ceramics, and composites/nanocomposites. In turn, the book addresses the latest techniques and approaches to engineering material surfaces/interfaces in, e.g., implants, tissue engineering, drug delivery, antifouling, and dentistry. Lastly, it summarizes various challenges in the design and development of novel biomaterials. Given its scope, it offers a valuable source of information for students, academics, physicians and particularly researchers from diverse disciplines such as material science and engineering, polymer engineering, biotechnology, bioengineering, chemistry, chemical engineering, nanotechnology, and biomedical engineering for various commercial and scientific applications.
Download or read book Surface Modification of Biomaterials written by Rachel Williams and published by Elsevier. This book was released on 2010-11-25 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface modification of biomaterials plays a significant role in determining the outcome of biological-material interactions. With the appropriate modification a material’s surface can be tailored to improve biocompatibility, adhesion and cell interactions. Consequently surface modification is vital in the development and design of new biomaterials and medical devices. Surface modification of biomaterials reviews both established surface modifications and those still in the early stages of research and discusses how they can be used to optimise biological interactions and enhance clinical performance.Part one begins with chapters looking at various types and techniques of surface modification including plasma polymerisation, covalent binding of poly (ethylene glycol) (PEG), heparinisation, peptide functionalisation and calcium phosphate deposition before going on to examine metal surface oxidation and biomaterial surface topography to control cellular response with particular reference to technologies, cell behaviour and biomedical applications. Part two studies the analytical techniques and applications of surface modification with chapters on analysing biomaterial surface chemistry, surface structure, morphology and topography before moving onto discuss modifying biomaterial surfaces to optimise interactions with blood, control infection, optimise interactions with soft tissues, repair and regenerate nerve cells, control stem cell growth and differentiation and to optimise interactions with bone.The distinguished editor and international team of contributors to Surface modification of biomaterials have produced a unique overview and detailed chapters on a range of surface modification techniques which will provide an excellent resource for biomaterials researchers and scientists and engineers concerned with improving the properties of biomaterials. It will also be beneficial for academics researching surface modification. Reviews both established surface modifications and those still in the early stages of research and how they can be used to optimise biological interactions and enhance clinical performance Studies analytical techniques and applications of surface modification with chapters assessing biomaterial surface chemistry, surface structure, morphology and topography Discusses modifying biomaterial surfaces to optimise interactions with blood and soft tissues and also to repair and regenerate nerve cells and control infection
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Surface Engineering Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-09-14 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced surfaces enriches the high-throughput engineering of physical and chemical phenomenon in relatin to electrical, magnetic, electronics, thermal and optical controls, as well as large surface areas, protective coatings against water loss and excessive gas exchange. A more sophisticated example could be a highly selective surface permeability allowing passive diffusion and selective transport of molecules in the water or gases. The smart surface technology provides an interlayer model which prevents the entry of substances without affecting the properties of neighboring layers. A number of methods have been developed for coatings, which are essential building blocks for the top-down and/or bottom-up design of numerous functional materials. Advanced Surface Engineering Materials offers a detailed up-to-date review chapters on the functional coatings and adhesives, engineering of nanosurfaces, high-tech surface, characterization and new applications. The 13 chapters in this book are divided into 3 parts (Functional coatings and adhesives; Engineering of nanosurfaces; High-tech surface, characterization and new applications) and are all written by worldwide subject matter specialists. The book is written for readers from diverse backgrounds across chemistry, physics, materials science and engineering, medical science, environmental, bio- and nano- technologies and biomedical engineering. It offers a comprehensive view of cutting-edge research on surface engineering materials and their technological importance.
Download or read book Biomaterials Surface Science written by Andreas Taubert and published by John Wiley & Sons. This book was released on 2013-07-23 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the interface of biology, chemistry, and materials science, this book provides an overview of this vibrant research field, treating the seemingly distinct disciplines in a unified way by adopting the common viewpoint of surface science. The editors, themselves prolific researchers, have assembled here a team of top-notch international scientists who read like a "who's who" of biomaterials science and engineering. They cover topics ranging from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices. As a result, the book explains the complex interplay of cell behavior and the physics and materials science of artificial devices. Of equal interest to young, ambitious scientists as well as to experienced researchers.
Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. An expansive overview of surface modification techniques for biomedical use In-depth exploration of issues arising from metal biomaterial use Includes examples of applications in a clinical setting
Download or read book Surface Engineering written by R.S. Walia and published by CRC Press. This book was released on 2022-12-19 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is considered an important aspect in the reduction of friction and wear. This reference text discusses a wide range of surface engineering technologies along with applications in a comprehensive manner. The book describes various methods in surface engineering technology with a thorough explanation of various aspects of each process that comes under this domain. Apart from an enhanced explanation of the process and its attributes, this book also gives insight into the types of materials, applications, and optimization of surface engineering techniques. It discusses important topics including surface engineering of the functionality of graded materials, materials characterization, processing of biomaterials, design, surface modification technologies and process control, smart manufacturing, artificial intelligence, and machine learning applications. The book: discusses computational and simulation analyses for better selection of process parameters covers optimizations of processes with state-of-the-art technologies discusses applications of surface engineering in medical, agricultural, architecture engineering, and allied sectors covers processing techniques of biomaterials in surface engineering The text is useful for senior undergraduate, graduate students, and academic researchers working in diverse areas such as industrial and production engineering, mechanical engineering, materials science, and manufacturing science. It covers a hybrid process for surface modification, modeling techniques, and issues in surface engineering.
Download or read book An Introduction To Biomaterials Science And Engineering written by A Sandeep Kranthi Kiran and published by World Scientific. This book was released on 2021-04-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad scope of the field of biomaterials science and technology, focusing on theory, advances and applications. It is written for those who would like to develop their interest and knowledge towards biomaterials or materials science and engineering. All aspects of biomaterials science are thoroughly addressed, from basic principles of biomaterials, organs and medical devices to advanced topics such as tissue engineering, surface engineering, sterilization techniques, 3D printing and drug delivery systems. Readers are also introduced to major concepts of surface modification techniques, and potential applications of different classes of biomaterials. Multiple-choice questions at the end of every chapter will be helpful for students to test their understanding of each topic, with answers provided at the end of the book.Ultimately, this book offers a one-stop source of information on the essentials of biomaterials and engineering. It is useful both as an introduction and advanced reference on recent advances in the biomaterials field. Suitable readers include undergraduate and graduate students, especially those in Materials Science, Biomedical Engineering and Bioengineering.
Download or read book Comprehensive Biomaterials Biocompatibility surface engineering and delivery of drugs genes and other molecules written by Paul Ducheyne and published by . This book was released on 2011 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials is a dynamic, changing field that impacts modern medicine and therapeutics in diverse ways. This modern, all-encompassing comprehensive treatment accurately captures the diversity, breadth and dimensions of the biomaterials field. It describes the many modern aspects of biomaterials - from basic science to clinical applications - across the formulations and chemistry of polymers, ceramics and metals and their use in various biomedical devices and implants, as well as their clinical performance and host responses. Conventional clinically accepted biomaterials as well as emerging prototypes, studies and new ideas, along with visionary predictions of future biomaterials compositions and capabilities, are all extensively covered by hundreds of experts in the field. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance as well as future prospects Presents appropriate analytical methods and testing procedures in addition to potential device applications Provides strategic insights for those working on diverse application areas such as R&D, regulatory management, and commercial development
Download or read book Osseoconductive Surface Engineering for Orthopedic Implants written by Amirhossein Goharian and published by Academic Press. This book was released on 2021-01-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Osseoconductive Surface Engineering for Orthopedic Implants provides a comprehensive overview of the state of the art of osseointegration based on surface-mediated engineering. It offers a practical approach to the design and development of implant surface engineering, by reviewing and discussing the usability and efficacy of each processing technique. The reader can learn about the variety, characteristics, advantages, challenges, and optimum parameters for each process—enabling targeted selection of coatings and technologies to enhance long-term implant–bone integration. Practical and engineering notions in the field of osseoconductive surface engineering are reviewed and discussed using scientific principles and concepts. Engineering cases are analyzed in depth giving a thorough exploration and description of the engineering and scientific concepts for all osseoconductive surface engineering processes. Chapters integrate topics and are organised in such a way as to build on themes and practice.
Download or read book Biosurfaces written by Kantesh Balani and published by John Wiley & Sons. This book was released on 2015-01-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal as a graduate textbook, this title is aimed at helpingdesign effective biomaterials, taking into account the complexinteractions that occur at the interface when a synthetic materialis inserted into a living system. Surface reactivity,biochemistry, substrates, cleaning, preparation, and coatingsare presented, with numerous case studies and applicationsthroughout. Highlights include: Starts with concepts and works up to real-life applicationssuch as implantable devices, medical devices, prosthetics, and drugdelivery technology Addresses surface reactivity, requirements for surface coating,cleaning and preparation techniques, and characterization Discusses the biological response to coatings Addresses biomaterial-tissue interaction Incorporates nanomechanical properties and processingstrategies
Download or read book Structural Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2021-04-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Biomaterials: Properties, Characteristics, and Selection serves as a single point of reference to digest current research and develop a deeper understanding in the field of biomaterials engineering. This book uses a materials-focused approach, allowing the reader to quickly access specific, detailed information on biomaterials characterization and selection. Relevant to a range of readers, this book provides holistic coverage of the broad categories of structural biomaterials currently available and used in medical applications, highlighting the property requirements for structural biomaterials, their biocompatibility performance and their safety regulation in key categories such as metals, ceramics and polymers. The materials science perspective of this text ensures the content is accessible even to those without an extensive background in applied medicine, positioning this text not just for students, but as an overview and reference for researchers, scientists and engineers entering the field from related materials science disciplines. Provides a unique, holistic approach, covering key biomaterials categories in one text, including metals, ceramics and polymers Discusses advantages, disadvantages, biocompatibility performance and safety regulations, allowing for accurate materials selection in medical applications Utilizes a materials science perspective, allowing those without an extensive applied medical background to learn about the field
Download or read book Surface Engineering and Technology for Biomedical Implants written by Yoshiki Oshida and published by Momentum Press. This book was released on 2014-04-15 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book synthesizes a wide range of interdisciplinary literature to provide the state-of-the art of biomedical implants. It discusses materials and explains the three basic requirements for implant success from a surface engineering perspective: biological compatibility, biomechanical compatibility, morphological compatibility. Biomedical, mechanical, and materials engineers will find this book indispensable for understanding proper treatment of implant surfaces in order to achieve clinical success. Highlights include: • Coverage of surface engineering of polymer, metallic, ceramic and composite implant materials; • Coverage of chemical, mechanical, physical, thermal, and combined surface modification technologies; • Explanations of interfacial reaction between vital tissue and non-vital implant surface; and • Methodologies and technologies for modification of surface layer/zone to promote the osteo-integration, the ultimate success for biomedical implants in both dental and medical practice.
