Download or read book Surface Analysis written by John C. Vickerman and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and revised second edition of Surface Analysis: The Principal Techniques, deals with the characterisation and understanding of the outer layers of substrates, how they react, look and function which are all of interest to surface scientists. Within this comprehensive text, experts in each analysis area introduce the theory and practice of the principal techniques that have shown themselves to be effective in both basic research and in applied surface analysis. Examples of analysis are provided to facilitate the understanding of this topic and to show readers how they can overcome problems within this area of study.
Download or read book Characterization and Chemical Modification of the Silica Surface written by E.F. Vansant and published by Elsevier. This book was released on 1995-04-25 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide surface materials are widely used in many applications, in particular where chemically modified oxide surfaces are involved. Indeed, in disciplines such as separation, catalysis, bioengineering, electronics, ceramics, etc., modified oxide surfaces are very important. In all cases, the knowledge of their chemical and surface characteristics is of great importance for the understanding and eventual improvement of their performances. This book reviews the latest techniques and procedures in the characterization and chemical modification of the silica surface, presenting a unified and state-of-the-art approach to the relevant analysis techniques and modification procedures, covering 1000 references integrated into one clear concept.
Download or read book Surface Analysis written by J. C. Vickerman and published by . This book was released on 1997 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Chemical Bonding at Surfaces and Interfaces written by Anders Nilsson and published by Elsevier. This book was released on 2011-08-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. - Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts - This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component - Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing - Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces
Download or read book Characterization of Solid Surfaces written by Philip F. Kane and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until comparatively recently, trace analysis techniques were in general directed toward the determination of impurities in bulk materials. Methods were developed for very high relative sensitivity, and the values determined were average values. Sampling procedures were devised which eliminated the so-called sampling error. However, in the last decade or so, a number of developments have shown that, for many purposes, the distribution of defects within a material can confer important new properties on the material. Perhaps the most striking example of this is given by semiconductors; a whole new industry has emerged in barely twenty years based entirely on the controlled distribu tion of defects within what a few years before would have been regarded as a pure, homogeneous crystal. Other examples exist in biochemistry, metallurgy, polyiners and, of course, catalysis. In addition to this of the importance of distribution, there has also been a recognition growing awareness that physical defects are as important as chemical defects. (We are, of course, using the word defect to imply some dis continuity in the material, and not in any derogatory sense. ) This broadening of the field of interest led the Materials Advisory Board( I} to recommend a new definition for the discipline, "Materials Character ization," to encompass this wider concept of the determination of the structure and composition of materials. In characterizing a material, perhaps the most important special area of interest is the surface.
Download or read book Modern Techniques of Surface Science written by D. P. Woodruff and published by Cambridge University Press. This book was released on 1994-03-03 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded second edition of the standard work on new techniques for studying solid surfaces.
Download or read book Methods of Surface Analysis written by A.W. Czanderna and published by Elsevier. This book was released on 2012-12-02 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of Surface Analysis deals with the determination of the composition of surfaces and the identification of species attached to the surface. The text applies methods of surface analysis to obtain a composition depth profile after various stages of ion etching or sputtering. The composition at the solid—solid interface is revealed by systematically removing atomic planes until the interface of interest is reached, in which the investigator can then determine its composition. The book reviews the effect of ion etching on the results obtained by any method of surface analysis including the effect of the rate of etching, incident energy of the bombarding ion, the properties of the solid, the effect of the ion etching on generating an output signal of electrons, ions, or neutrals. The text also describes the effect of the residual gases in the vacuum environment. The book considers the influence of the sample geometry, of the type (metal, insulator, semiconductor, organic), and of the atomic number can have on surface analysis. The text describes in detail low energy ion scattering spectroscopy, X-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectroscopy, and infrared reflection-absorption spectroscopy. The book can prove useful for researchers, technicians, and scientists whose works involve organic chemistry, analytical chemistry, and other related fields of chemistry, such as physical chemistry or inorganic chemistry.
Download or read book Auger and X Ray Photoelectron Spectroscopy in Materials Science written by Siegfried Hofmann and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: To anyone who is interested in surface chemical analysis of materials on the nanometer scale, this book is prepared to give appropriate information. Based on typical application examples in materials science, a concise approach to all aspects of quantitative analysis of surfaces and thin films with AES and XPS is provided. Starting from basic principles which are step by step developed into practically useful equations, extensive guidance is given to graduate students as well as to experienced researchers. Key chapters are those on quantitative surface analysis and on quantitative depth profiling, including recent developments in topics such as surface excitation parameter and backscattering correction factor. Basic relations are derived for emission and excitation angle dependencies in the analysis of bulk material and of fractional nano-layer structures, and for both smooth and rough surfaces. It is shown how to optimize the analytical strategy, signal-to-noise ratio, certainty and detection limit. Worked examples for quantification of alloys and of layer structures in practical cases (e.g. contamination, evaporation, segregation and oxidation) are used to critically review different approaches to quantification with respect to average matrix correction factors and matrix relative sensitivity factors. State-of-the-art issues in quantitative, destructive and non-destructive depth profiling are discussed with emphasis on sputter depth profiling and on angle resolved XPS and AES. Taking into account preferential sputtering and electron backscattering corrections, an introduction to the mixing-roughness-information depth (MRI) model and its extensions is presented.
Download or read book Surface Analysis Methods in Materials Science written by John O'Connor and published by Springer Science & Business Media. This book was released on 2003-04-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book A Guide to Materials Characterization and Chemical Analysis written by John P. Sibilia and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written both for the novice and for the experienced scientist, this miniature encyclopedia concisely describes over one hundred materials methodologies, including evaluation, chemical analysis, and physical testing techniques. Each technique is presented in terms of its use, sample requirements, and the engineering principles behind its methodology. Real life industrial and academic applications are also described to give the reader an understanding of the significance and utilization of technique. There is also a discussion of the limitations of each technique.
Download or read book Surfaces and Interfaces for Biomaterials written by Pankaj Vadgama and published by CRC Press. This book was released on 2005-06-14 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such problems as rejection, the interface between an implant and its human host is a critical area in biomaterials. Surfaces and Interfaces for Biomaterials summarizes the wealth of research on understanding the surface properties of biomaterials and the way they interact with human tissue. The first part of the book reviews the way biomaterial surfaces form. Part Two then discusses ways of monitoring and characterizing surface structure and behavior. The final two parts of the book look at a range of in vitro and in vivo studies of the complex interactions between biomaterials and the body. Chapters cover such topics as bone and tissue regeneration, the role of interface interactions in biodegradable biomaterials, microbial biofilm formation, vascular tissue engineering and ways of modifying biomaterial surfaces to improve biocompatibility. Surfaces and Interfaces for Biomaterials will be a standard work on how to understand and control surface processes in ensuring biomaterials are used successfully in medicine.
Download or read book Sample Preparation Techniques in Analytical Chemistry written by Somenath Mitra and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of accurate sample preparation techniques cannot be overstated--meticulous sample preparation is essential. Often overlooked, it is the midway point where the analytes from the sample matrix are transformed so they are suitable for analysis. Even the best analytical techniques cannot rectify problems generated by sloppy sample pretreatment. Devoted entirely to teaching and reinforcing these necessary pretreatment steps, Sample Preparation Techniques in Analytical Chemistry addresses diverse aspects of this important measurement step. These include: * State-of-the-art extraction techniques for organic and inorganic analytes * Sample preparation in biological measurements * Sample pretreatment in microscopy * Surface enhancement as a sample preparation tool in Raman and IR spectroscopy * Sample concentration and clean-up methods * Quality control steps Designed to serve as a text in an undergraduate or graduate level curriculum, Sample Preparation Techniques in Analytical Chemistry also provides an invaluable reference tool for analytical chemists in the chemical, biological, pharmaceutical, environmental, and materials sciences.
Download or read book Chemical Analysis in the Laboratory written by Irene Mueller-Harvey and published by Royal Society of Chemistry. This book was released on 2019-05-02 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Often considered as a simple task, chemical analysis actually requires a variety of quite complex skills. As a practitioner in an interdisciplinary science, the analytical scientist is relied upon to have the knowledge and skill to help solve problems or to provide relevant information. They will need to think laterally, examine the process from sampling to final result carefully, in addition to selecting the appropriate technique in order to satisfy the objective and obtain a reliable result. The aim of this book is to provide basic training in the whole analytical process for students, demonstrating why analysis is necessary and how to take samples, before they attempt to carry out any analysis in the laboratory. Initially, planning of work, and collection and preparation of the sample are discussed in detail. This is followed by a look at issues of quality control and accreditation and the basic equipment (eg. balances, glassware) and techniques that are required. Throughout, safety issues are addressed, and examples and practical exercises are given. Chemical Analysis in the Laboratory: A Basic Guide will prove invaluable for students of chemistry, plant science, food science, biology, agriculture and soil science, providing them with a guide to the skills that will be required in the Analytical Laboratory. Teachers and lecturers will also find the material of assistance in developing the analytical thinking and skills of their students. New employees in analytical laboratories will welcome it as an indispensable guide.
Download or read book Beyond the Molecular Frontier written by National Research Council and published by National Academies Press. This book was released on 2003-03-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and chemical engineering have changed significantly in the last decade. They have broadened their scopeâ€"into biology, nanotechnology, materials science, computation, and advanced methods of process systems engineering and controlâ€"so much that the programs in most chemistry and chemical engineering departments now barely resemble the classical notion of chemistry. Beyond the Molecular Frontier brings together research, discovery, and invention across the entire spectrum of the chemical sciencesâ€"from fundamental, molecular-level chemistry to large-scale chemical processing technology. This reflects the way the field has evolved, the synergy at universities between research and education in chemistry and chemical engineering, and the way chemists and chemical engineers work together in industry. The astonishing developments in science and engineering during the 20th century have made it possible to dream of new goals that might previously have been considered unthinkable. This book identifies the key opportunities and challenges for the chemical sciences, from basic research to societal needs and from terrorism defense to environmental protection, and it looks at the ways in which chemists and chemical engineers can work together to contribute to an improved future.
Download or read book The Local Chemical Analysis of Materials written by J. W. Martin and published by Elsevier. This book was released on 2003-10-31 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Expert, up-to-date guidance on the appropriate techniques of local chemical analysis * Comprehensive. This volume is an ideal starting point for material research and development, bringing together a number of techniques usually only found in isolation * Recent examples of the applications of techniques are provided in all cases Helping to solve the problems of materials scientists in academia and industry, this book offers guidance on appropriate techniques of chemical analysis of materials at the local level, down to the atomic scale. Comparisons are made between various techniques in terms of the nature of the probe employed. The detection limit and the optimum spatial resolution is also considered, as well as the range of atomic number that may be identified and the precision and methods of calibration, where appropriate. The Local Chemical Analysis of Materials is amply illustrated allowing the reader to easily see typical results. It includes a comparative table of techniques to aid selection for analysis and a table of acronyms, particularly valuable in this jargon-riddled area.
