Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by Joseph Pask and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th University Conference on Ceramics, which also was the 7th LBL/MMRD International Materials Symposium, was held on the campus of the University of California at Berkeley from July 28 to August 1, 1980. It was devoted to the subject of surfaces and interfaces in ceramic and ceramic-metal systems. The program was timely and of great interest, as indicated by the large number of contributed papers, which included contributions from ten foreign countries. These proceedings are divided into the following categories dealing with the chemistry and physics of interfaces: calculations of interface/surface states, characterization of surfaces and inter faces, thermodynamics of interfaces, influence of surface and inter faces on selected ceramic processes, grain boundary structures, effects of grain boundaries on deformation and fracture, interfacial phenomena, formation of interfaces, development of adhesion, and reactions at interfaces. A number of papers deal specifically with the Si-Si02 interface, which probably has received more attention than any other because of its importance in the electronics industry. This coverage fulfills the principal objective of the symposium which was to explore and assess the current fundamental understand ing of interfaces and surfaces. A parallel objective of the symposium was fulfilled by a group of papers dealing with the correlation of interfacial characteris tics with mechanical behavior. This group includes papers dealing with the adherence of dissimilar materials at interfaces.
Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by Joseph Pask and published by Springer. This book was released on 2012-07-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th University Conference on Ceramics, which also was the 7th LBL/MMRD International Materials Symposium, was held on the campus of the University of California at Berkeley from July 28 to August 1, 1980. It was devoted to the subject of surfaces and interfaces in ceramic and ceramic-metal systems. The program was timely and of great interest, as indicated by the large number of contributed papers, which included contributions from ten foreign countries. These proceedings are divided into the following categories dealing with the chemistry and physics of interfaces: calculations of interface/surface states, characterization of surfaces and inter faces, thermodynamics of interfaces, influence of surface and inter faces on selected ceramic processes, grain boundary structures, effects of grain boundaries on deformation and fracture, interfacial phenomena, formation of interfaces, development of adhesion, and reactions at interfaces. A number of papers deal specifically with the Si-Si02 interface, which probably has received more attention than any other because of its importance in the electronics industry. This coverage fulfills the principal objective of the symposium which was to explore and assess the current fundamental understand ing of interfaces and surfaces. A parallel objective of the symposium was fulfilled by a group of papers dealing with the correlation of interfacial characteris tics with mechanical behavior. This group includes papers dealing with the adherence of dissimilar materials at interfaces.
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-04 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Adhesion written by L.H. Lee and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concise Encyclopedia of Advanced Ceramic Materials written by R.J. Brook and published by Elsevier. This book was released on 2012-12-02 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramics cover a wide range of materials which are ceramic by nature but have been developed in response to specific requirements. This encyclopedia collects together 137 articles in order to provide an up-to-date account of the advanced ceramic field. Some articles are drawn from the acclaimed Encyclopedia of Materials Science and Engineering, often revised, and others have been newly commissioned. The Concise Encyclopedia of Advanced Ceramic Materials aims to provide a comprehensive selection of accessible articles which act as an authoritative guide to the subject. The format is designed to help the readers form opinions on a particular subject. Arranged alphabetically, with a broad subject range, the articles are diverse in character and style, thereby stimulating further discussion. Topics covered include survey articles on glass, hot pressing, insulators, powders, and many are concerned with specific chemical systems and their origins, processing and applications. The Concise Encyclopedia of Advanced Ceramic Materials will be invaluable to materials scientists, researchers, educators and industrialists working in technical ceramics.
Download or read book Tailoring Multiphase and Composite Ceramics written by Richard E. Tressler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the Twenty-First University Conference on Ceramic Science held at The Pennsylvania State University, University Park, PA on July 17, 18 and 19, 1985 are compiled in this volume "Tailoring Multiphase and Composite Ceramics". This Conference emphasized the' discussion and analysis of the properties of multiphase ceramic materials in which the microstructure is deliberately tailored for specific applications or properties. Inter nationally recognized authorities presented keynote and invited lectures on topics dealing with processing and fabrication of multiphase and com posite electroceramics, fiber reinforced composites and high temperature multiphase ceramics. Results of recent research were presented in oral and poster sessions by leading researchers from several countries. This collection of papers represents the state of the art in our understand ing of the processing-structure-property interrelationships for these materials which possess unique and useful electrical, magnetic, optical, mechanical and thermal properties as a result of their multiphase nature. We are grateful for the financial support of the National Science Foundation, the Office of Naval Research, the Air Force Office of Scien tific Research, and the Defense Advanced Research Projects Agency for this conference. We gratefully acknowledge Prof. Robert Davis' leader ship role in steering and expanding this university conference series on ceramic science. We thank Ron Avillion and Linda Rose for their expert assistance in planning and coordinating the meeting. Thanks are due to Ms. Marian Reed, Ms. Judy Bell and Ms.
Download or read book Metal Ceramic Interfaces written by M. Rühle and published by Elsevier. This book was released on 2013-10-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomistics of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.
Download or read book Handbook of Surface and Interface Analysis written by John C. Riviere and published by CRC Press. This book was released on 2009-06-24 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original Handbook of Surface and Interface Analysis: Methods for Problem-Solving was based on the authors' firm belief that characterization and analysis of surfaces should be conducted in the context of problem solving and not be based on the capabilities of any individual technique. Now, a decade later, trends in science and technology appear
Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, comprehensive text. Building on a foundation of crystal structures, phase equilibria, defects, and the mechanical properties of ceramic materials, students are shown how these materials are processed for a wide diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text, and a chapter is devoted to ceramics as gemstones. This course-tested text now includes expanded chapters on the role of ceramics in industry and their impact on the environment as well as a chapter devoted to applications of ceramic materials in clean energy technologies. Also new are expanded sets of text-specific homework problems and other resources for instructors. The revised and updated Second Edition is further enhanced with color illustrations throughout the text.
Download or read book Joining Processes written by M.G. Nicholas and published by Springer Science & Business Media. This book was released on 1998-09-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining Processes is aimed at scientists and engineers who need to specify effective means of joining metals and ceramics, and also for undergraduates whose studies encompass joining processes. Joining Processes provides a brief review of the spectrum of joining processes ranging from fusion welding to adhesive bonding, followed by a detailed introduction to brazing, diffusion bonding and their hybrid processes. This book also describes the scientific principles of the joining processes and provides practical information about the optimum selection of joining materials, joint designs and processing parameters. The effects of both similarities and significant differences of the processes on joint properties are emphasised and illustrated by descriptions of case histories of successful applications.
Download or read book Science of Ceramic Interfaces II written by J. Nowotny and published by Newnes. This book was released on 1995-01-13 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers arose from the Proceedings of the International Workshop on Interfaces of Ceramic Materials held in Australia, 1993 and is a continuation of the previous book published under the same title. The objective of the Workshop was to discuss research progress on the chemistry of ceramic interfaces and related industrial aspects. Due to the multidisciplinary character of ceramic interfaces the book contains articles covering several areas of expertise, including ceramics, surface science, solid state electrochemistry, metallurgy and high temperature chemistry. Some technical papers are also included in this volume.Scientists and engineers working in these areas, as well as students in materials science and engineering, will find this book of particular significance.
Download or read book Interfaces in New Materials written by P. Grange and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the workshop, Interfaces in New Materials, held in Louvain-la-Neuve, Belgium, 19-20 November 1990
Download or read book Mechanics of Components with Treated or Coated Surfaces written by Jaroslav Mencík and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface treatment is an efficient means for protection of various products against corrosion and also for increasing strength or resistance to wear or fatigue. Also certain electrical, chemical or optical properties may be achieved only by creating special surface layers. Many examples can be given: leaf springs with shot-peened surfaces; carburised and hardened tooth gears; coated cutting tips for machining; chemical appliances made of glass strengthened by ion exchange; enamelled vessels and containers; components for engines or turbines with heat insulating ceramic surface layers; chemical equipment made from low-carbon steel clad with a layer of stainless steel or other more expensive material; endoprostheses of hip joints with ceramic coatings; multilayered integrated circuits and other components for electronics and electrotechnology. In many of these components, high stresses often act; from mechanical loading as well as thermal and residual ones, caused by the surface treatment itself. These stresses can sometimes lead to a failure of parts bearing small or even no load. Thus, for an efficient utilisation of all the advantages surface treatment offers, and for assuring that the designed component will work reliably for a certain period, often under very severe conditions, it is necessary to know how components with coated or otherwise treated surfaces behave under mechanical loading, and what the reasons may be for their preliminary fracture or rejection from service. It is also important to know the general principles of design of surface treated components.
Download or read book written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by and published by . This book was released on 1981 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Program Summary Department of Materials Sciences and Engineering Lawrence Berkeley National Laboratory written by and published by DIANE Publishing. This book was released on with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
