Download or read book Surface and Interface Characterization of Thin Film Energy Devices written by Wŏn-yong Yi and published by Stanford University. This book was released on 2010 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film devices for energy conversion have become a vital area of research to achieve high performance with low cost. As the surface-to-volume ratio becomes significant, the fundamental physics of the surface and interface microstructures and the reaction mechanisms are important to developing such energy devices or processes. My Ph.D. research is thus focus on surface and interface characterization of energy materials for thin film devices with engineered components fabricated by novel technologies. The first part of this dissertation discusses how surface microstructures influence fuel cell performance. According to the high resolution characterization of surface grain boundaries in solid oxide ion conductors, oxygen vacancy segregation at grain boundaries was observed, indicating that the grain boundaries can be more active sites for oxygen incorporation into the electrolyte. This preferred surface reaction at grain boundaries was verified by AC impedance spectroscopy. In addition, using atomic force microscopy, the local rearrangement of charged species on the oxide surface was investigated as a function of time and temperature to quantitatively analyze the diffusivity of oxygen vacancies on the surface. The second part discusses investigation of quantum confined structures that was aimed at contributing to the development of new solar cell architectures. The electronic properties of quantum confined structures, fabricated by atomic layer deposition (ALD), were characterized by scanning tunneling microscopy. In particular, the band gap of lead sulfide quantum well was tuned as a function of well thickness and potential barrier height. In addition, various nano-patterning techniques were developed to fabricate higher-order quantum confined structures, including area-selective ALD.
Download or read book Surface and Interface Characterization of Thin Film Energy Devices written by Won Young Lee and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film devices for energy conversion have become a vital area of research to achieve high performance with low cost. As the surface-to-volume ratio becomes significant, the fundamental physics of the surface and interface microstructures and the reaction mechanisms are important to developing such energy devices or processes. My Ph. D. research is thus focus on surface and interface characterization of energy materials for thin film devices with engineered components fabricated by novel technologies. The first part of this dissertation discusses how surface microstructures influence fuel cell performance. According to the high resolution characterization of surface grain boundaries in solid oxide ion conductors, oxygen vacancy segregation at grain boundaries was observed, indicating that the grain boundaries can be more active sites for oxygen incorporation into the electrolyte. This preferred surface reaction at grain boundaries was verified by AC impedance spectroscopy. In addition, using atomic force microscopy, the local rearrangement of charged species on the oxide surface was investigated as a function of time and temperature to quantitatively analyze the diffusivity of oxygen vacancies on the surface. The second part discusses investigation of quantum confined structures that was aimed at contributing to the development of new solar cell architectures. The electronic properties of quantum confined structures, fabricated by atomic layer deposition (ALD), were characterized by scanning tunneling microscopy. In particular, the band gap of lead sulfide quantum well was tuned as a function of well thickness and potential barrier height. In addition, various nano-patterning techniques were developed to fabricate higher-order quantum confined structures, including area-selective ALD.
Download or read book In Situ Real Time Characterization of Thin Films written by Orlando Auciello and published by John Wiley & Sons. This book was released on 2001 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth look at the state of the art of in situ real-time monitoring and analysis of thin films With thin film deposition becoming increasingly critical in the production of advanced electronic and optical devices, scientists and engineers working in this area are looking for in situ, real-time, structure-specific analytical tools for characterizing phenomena occurring at surfaces and interfaces during thin film growth. This volume brings together contributed chapters from experts in the field, covering proven methods for in situ real-time analysis of technologically important materials such as multicomponent oxides in different environments. Background information and extensive references to the current literature are also provided. Readers will gain a thorough understanding of the growth processes and become acquainted with both emerging and more established methods that can be adapted for in situ characterization. Methods and their most useful applications include: * Low-energy time-of-flight ion scattering and direct recoil spectroscopy (TOF-ISRAS) for studying multicomponent oxide film growth processes * Reflection high-energy electron diffraction (RHEED) for determining the nature of chemical reactions at film surfaces * Spectrometric ellipsometry (SE) for use in the analysis of semiconductors and other multicomponent materials * Reflectance spectroscopy and transmission electron microscopy for monitoring epitaxial growth processes * X-ray fluorescence spectroscopy for studying surface and interface structures * And other cost-effective techniques for industrial application
Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-10-10 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.
Download or read book Handbook of Surfaces and Interfaces of Materials Five Volume Set written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-10-26 with total page 1915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book Characterization of Thin Films Used as Electrodes in Electrochemical Devices Phase II written by and published by . This book was released on 1987 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work described in this Phase II final report examines a variety of physical methods which have been applied to the characterization of thin film morphology. Properties such as pore size, surface roughness, porosity, thickness, surface area, permeability, and pore/particle interface have all been evaluated using conventional and/or novel techniques. The techniques investigated include image analysis, profilometry, permeametry, porosimetry, and gas adsorption.
Download or read book Metal Oxide Based Thin Film Structures written by Nini Pryds and published by Elsevier. This book was released on 2017-09-07 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Thin Film Structures: Formation, Characterization and Application of Interface-Based Phenomena bridges the gap between thin film deposition and device development by exploring the synthesis, properties and applications of thin film interfaces. Part I deals with theoretical and experimental aspects of epitaxial growth, the structure and morphology of oxide-metal interfaces deposited with different deposition techniques and new developments in growth methods. Part II concerns analysis techniques for the electrical, optical, magnetic and structural properties of thin film interfaces. In Part III, the emphasis is on ionic and electronic transport at the interfaces of Metal-oxide thin films. Part IV discusses methods for tailoring metal oxide thin film interfaces for specific applications, including microelectronics, communication, optical electronics, catalysis, and energy generation and conservation. This book is an essential resource for anyone seeking to further their knowledge of metal oxide thin films and interfaces, including scientists and engineers working on electronic devices and energy systems and those engaged in research into electronic materials. Introduces the theoretical and experimental aspects of epitaxial growth for the benefit of readers new to the field Explores state-of-the-art analysis techniques and their application to interface properties in order to give a fuller understanding of the relationship between macroscopic properties and atomic-scale manipulation Discusses techniques for tailoring thin film interfaces for specific applications, including information, electronics and energy technologies, making this book essential reading for materials scientists and engineers alike
Download or read book Metal Based Thin Films for Electronics written by Klaus Wetzig and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date handbook covers the main topics of preparation, characterization and properties of complex metal-based layer systems. The authors -- an outstanding group of researchers -- discuss advanced methods for structure, chemical and electronic state characterization with reference to the properties of thin functional layers, such as metallization and barrier layers for microelectronics, magnetoresistive layers for GMR and TMR, sensor and resistance layers. As such, the book addresses materials specialists in industry, especially in microelectronics, as well as scientists, and can also be recommended for advanced studies in materials science, analytics, surface and solid state science.
Download or read book Solid Surfaces Interfaces and Thin Films written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. Compa- red to the earlier editions, which bore the title "Surfaces and Interfaces of Solid Materials", the book now places more emphasis on thin films, including also their superconducting and ferromagnetic properties. The present 4th edition thus presents techniques of preparing well-defined solid surfaces and interfaces, fundamental aspects of adsorption and layer growth, as well as basic models for the descripti- on of structural, vibronic and electronic properties of sur- faces, interfaces and thin films. Because of their importan- ce for modern information technology, significant attention is paid to the electronic properties of semiconductor inter- faces and heterostructures. Collective phenomena , such as superconductivity and ferromagnetism, also feature promi- nently. Experimental sections covering essential measurement and preparation techniques are presented in separate panels.
Download or read book Thin Film Metal Oxides written by Shriram Ramanathan and published by Springer Science & Business Media. This book was released on 2009-12-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable energy technologies. Readers will find a detailed description of deposition and characterization of metal oxide thin films, theoretical treatment of select properties and their functional performance in solid state devices, from leading researchers. Scientists and engineers involved with oxide semiconductors, electronic materials and alternative energy will find Thin Film Metal-Oxides a useful reference.
Download or read book Handbook of Thin Films Five Volume Set written by Hari Singh Nalwa and published by Academic Press. This book was released on 2001-10-29 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume handbook focuses on processing techniques, characterization methods, and physical properties of thin films (thin layers of insulating, conducting, or semiconductor material). The editor has composed five separate, thematic volumes on thin films of metals, semimetals, glasses, ceramics, alloys, organics, diamonds, graphites, porous materials, noncrystalline solids, supramolecules, polymers, copolymers, biopolymers, composites, blends, activated carbons, intermetallics, chalcogenides, dyes, pigments, nanostructured materials, biomaterials, inorganic/polymer composites, organoceramics, metallocenes, disordered systems, liquid crystals, quasicrystals, and layered structures. Thin films is a field of the utmost importance in today's materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices. Advanced, high-performance computers, high-definition TV, digital camcorders, sensitive broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are but a few examples of miniaturized device technologies that depend the utilization of thin film materials. The Handbook of Thin Films Materials is a comprehensive reference focusing on processing techniques, characterization methods, and physical properties of these thin film materials.
Download or read book Thin Films for Energy Harvesting Conversion and Storage written by Zhong Chen and published by MDPI. This book was released on 2019-11-07 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient clean energy harvesting, conversion, and storage technologies are of immense importance for the sustainable development of human society. To this end, scientists have made significant advances in recent years regarding new materials and devices for improving the energy conversion efficiency for photovoltaics, thermoelectric generation, photoelectrochemical/electrolytic hydrogen generation, and rechargeable metal ion batteries. The aim of this Special Issue is to provide a platform for research scientists and engineers in these areas to demonstrate and exchange their latest research findings. This thematic topic undoubtedly represents an extremely important technological direction, covering materials processing, characterization, simulation, and performance evaluation of thin films used in energy harvesting, conversion, and storage.
Download or read book Surfaces and Interfaces of Metal Oxide Thin Films Multilayers Nanoparticles and Nano composites written by Alejandro G. Roca and published by Springer Nature. This book was released on 2021-09-20 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview and current state of the art of different types of metal oxide nanomaterials, either in nanoparticles or thin film structure. It covers from the development and optimization of different nanofabrication/synthesis techniques for nanostructures which are currently the attention of the research community, the study of the structure and interactions by different characterization techniques of heterostructured materials and the final impact in different applications such as nanotherapy, data storage, super magnets, high-frequency devices. The book’s 13 chapters provide deep insight into the intriguing science of oxide materials and include contributions on novel technologies to fabricate nanomaterials with a broad range of functional properties (semiconducting, magnetic, ferroelectric, thermoelectric, optical, flexible and mechanical). This book is intended to the experts for consolidation of their knowledge but also for students who aim to learn and get basics of nanostructured metal oxides in diverse forms.
Download or read book Science And Technology Of Thin Films written by Francesco Cino Matacotta and published by World Scientific. This book was released on 1995-10-31 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together detailed discussions by leading experts on the various innovative aspects of thin films growth, deposition and characterization techniques, and new thin film materials and devices. It addresses through the different viewpoints of the contributors, the major problem of thin films science - the relation between the energy of the condensing species and the resulting properties of the films. Some of the issues considered include energetic condensation, bombardment stabilization, pulsed electron beam ablation, orientation and self-organization of organic, ferroelectric and nanoparticle thin films. Several chapters focus on applications such as the recent developments in organic optoelectronics, large area electronic technology and superconducting thin film devices.
Download or read book Thin Film Physics And Devices Fundamental Mechanism Materials And Applications For Thin Films written by Jianguo Zhu and published by World Scientific. This book was released on 2021-06-18 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin films have an extremely broad range of applications from electronics and optics to new materials and devices. Collaborative and multidisciplinary efforts from physicists, materials scientists, engineers and others have established and advanced a field with key pillars constituting (i) the synthesis and processing of thin films, (ii) the understanding of physical properties in relation to the nanometer scale, (iii) the design and fabrication of nano-devices or devices with thin film materials as building blocks, and (iv) the design and construction of novel tools for characterization of thin films.Against the backdrop of the increasingly interdisciplinary field, this book sets off to inform the basics of thin film physics and thin film devices. Readers are systematically introduced to the synthesis, processing and application of thin films; they will also study the formation of thin films, their structure and defects, and their various properties — mechanical, electrical, semiconducting, magnetic, and superconducting. With a primary focus on inorganic thin film materials, the book also ventures on organic materials such as self-assembled monolayers and Langmuir-Blodgett films.This book will be effective as a teaching or reference material in the various disciplines, ranging from Materials Science and Engineering, Electronic Science and Engineering, Electronic Materials and Components, Semiconductor Physics and Devices, to Applied Physics and more. The original Chinese publication has been instrumental in this purpose across many Chinese universities and colleges.
Download or read book Interface and Surface Characterization of Carbon Based Thin Films written by Sabine Schelz and published by . This book was released on 1994 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: