Download or read book Catalysis An Integrated Approach written by R.A. van Santen and published by Elsevier. This book was released on 2000-09-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.

Download or read book Heterogeneous Catalysis written by J. R. H. Ross and published by Elsevier. This book was released on 2011-11-07 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Julian R.H. Ross

Download or read book Bimetallic Catalysts written by John H. Sinfelt and published by Wiley-Interscience. This book was released on 1983-09-29 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an account of the research on bimetallic catalysts. Focuses attention on the possibility of influencing the selectivity of chemical transformations on metal surfaces and preparing metal alloys in a highly dispersed state. Covers the validation and elucidation of the bimetallic cluster concept. Includes figures and tables.

Download or read book Surface Chemistry and Catalysis written by Albert F. Carley and published by Springer Science & Business Media. This book was released on 2002-09-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting results are still emerging from the many research groups working in this fertile area and the book is an excellent stimulus to researchers at the start of the 21st century."--BOOK JACKET.

Download or read book Kinetics of Catalytic Reactions written by M. Albert Vannice and published by Springer Science & Business Media. This book was released on 2006-04-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to conduct kinetic experiments with heterogeneous catalysts, analyze and model the results, and characterize the catalysts Detailed analysis of mass transfer in liquid phase reactions involving porous catalysts. Important to the fine chemicals and pharmaceutical industries so it has appeal to many researchers in both industry and academia (chemical engineering and chemistry departments

Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.

Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.

Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications

Download or read book Concepts of Modern Catalysis and Kinetics written by I. Chorkendorff and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, the literature has offered a rather limited approach to the use of fundamental kinetics and their application to catalytic reactions. Subsequently, this book spans the full range from fundamentals of kinetics and heterogeneous catalysis via modern experimental and theoretical results of model studies to their equivalent large-scale industrial production processes. The result is key knowledge for students at technical universities and professionals already working in industry. '... such an enterprise will be of great value to the community, to professionals as well as graduate and undergraduate students attempting to move into the field of modern catalysis and kinetics. I strongly recommend you publish this book based on the proposal.' - Prof. Dr. G. A. Samorjai, University of California 'Both authors are well respected specialists, with a very long record of original top-quality work and an international reputation. A book from these authors will be considered an authoritative piece of work, I definitely support this project and I am looking forward to use the book when published.' - Prof. Dr. D. E. Resasco, University of Oklahoma 'I wholly support the proposed project. The authors are very competent young colleagues and there is a real need for such a textbook' - Prof. Dr. G. Ertl, Fritz-Haber-Institut, Max-Planck-Gesellschaft, Berlin

Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.

Download or read book CO2 Conversion and Utilization written by Chunshan Song and published by ACS Symposium. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry and processes for conversion and utilization of carbon dioxide. Topics include CO 2 utilization, its conversion to industrial chemicals and fuels, its coversion via synthesis gas, and new catalysts and chemical processes for conversion.

Download or read book Nanotechnology in Catalysis 3 written by Bing Zhou and published by Springer Science & Business Media. This book was released on 2004 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on the first and second symposia on Nanotechnology in Catalysis which were held in spring 2001 at the ACS 221st National Meeting in San Diego, CA, and in fall 2002 at the ACS 224th National Meeting in Boston, MA."--Pref.

Download or read book Environmental Degradation Causes and Remediation Strategies written by Vinod Kumar and published by Agro Environ Media, Publication Cell of AESA, Agriculture and Environmental Science Academy,. This book was released on 2020-03-10 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The compliance of this book is helpful for academicians, researchers, students, as well as other people seeking the relevant material in current trends of studies on the topic of environmental degradation.

Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.

Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.

Download or read book Engineering Solutions for Sustainability written by Jeffrey W. Fergus and published by John Wiley & Sons. This book was released on 2015-08-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of papers presented at Engineering Solutions for Sustainability: Materials and Resources II, a special symposium organized as part of the TMS 2015 Annual Meeting & Exhibition and held in Orlando, Florida, March 15-19, 2015. With impending and burgeoning societal issues affecting both developed and emerging nations, the global engineering community has a responsibility and an opportunity to truly make a difference and contribute. The papers in this collection address what materials and resources are integral to meeting basic societal sustainability needs in critical areas of energy, transportation, housing, and recycling. Contributions focus on the engineering answers for cost-effective, sustainable pathways; the strategies for effective use of engineering solutions; and the role of the global engineering community. Authors share perspectives on the major engineering challenges that face our world today; identify, discuss, and prioritize engineering solution needs; and establish how these fit into developing global-demand pressures for materials and human resources.

Download or read book Nanotechnology Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.