Download or read book Supervision Control and Optimization of Biotechnological Processes written by Rui Manuel Freitas Oliveira and published by . This book was released on 1998 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Supervision Control and Optimization of Biotechnical Processes Based on Hybrid Models written by Rui Manuel Freitas Oliveira and published by . This book was released on 1998 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer. This book was released on 2009-07-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.

Download or read book BIOTECHNOLOGY Volume XIV written by Horst W. Doelle and published by EOLSS Publications. This book was released on 2009-11-16 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Biotechnology is a component of the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. Biotechnology draws on the pure biological sciences (genetics, animal cell culture, molecular biology, microbiology, biochemistry, embryology, cell biology) and in many instances is also dependent on knowledge and methods from outside the sphere of biology (chemical engineering, bioprocess engineering, information technology, biorobotics). This 15-volume set contains several chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It carries state-of-the-art knowledge in the field and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book BIOTECHNOLOGY Volume IX written by Horst W. Doelle and published by EOLSS Publications. This book was released on 2009-10-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Biotechnology is a component of the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. Biotechnology draws on the pure biological sciences (genetics, animal cell culture, molecular biology, microbiology, biochemistry, embryology, cell biology) and in many instances is also dependent on knowledge and methods from outside the sphere of biology (chemical engineering, bioprocess engineering, information technology, biorobotics). This 15-volume set contains several chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It carries state-of-the-art knowledge in the field and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book BIOTECHNOLOGY Volume VIII written by Horst W. Doelle and published by EOLSS Publications. This book was released on 2009-11-16 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Biotechnology is a component of the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. Biotechnology draws on the pure biological sciences (genetics, animal cell culture, molecular biology, microbiology, biochemistry, embryology, cell biology) and in many instances is also dependent on knowledge and methods from outside the sphere of biology (chemical engineering, bioprocess engineering, information technology, biorobotics). This 15-volume set contains several chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It carries state-of-the-art knowledge in the field and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book BIOTECHNOLOGY Volume XIII written by Horst W. Doelle and published by EOLSS Publications. This book was released on 2009-11-16 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Biotechnology is a component of the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. Biotechnology draws on the pure biological sciences (genetics, animal cell culture, molecular biology, microbiology, biochemistry, embryology, cell biology) and in many instances is also dependent on knowledge and methods from outside the sphere of biology (chemical engineering, bioprocess engineering, information technology, biorobotics). This 15-volume set contains several chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It carries state-of-the-art knowledge in the field and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Automatic Control of Bioprocesses written by Denis Dochain and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Giving an overview of the challenges in the control of bioprocesses, this comprehensive book presents key results in various fields, including: dynamic modeling; dynamic properties of bioprocess models; software sensors designed for the on-line estimation of parameters and state variables; control and supervision of bioprocesses.

Download or read book Computer Applications in Fermentation Technology Modelling and Control of Biotechnological Processes written by N. M. Fish and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Richard Fox Chairman, Scientific Programme Committee Between 25th and 29th September, 1988, 243 people who either apply or research the use of computers in fermentation gathered together at Robinson College, Cambridge, UK. They came from 30 countries. The conference brought together two traditions. Firstly, it continued the series on Computer Applications in Fermentation Technology (ICCAFT) inaugurated by Henri Blanchere in Dijon in 1973 and carried forward in Philadelphia and Manchester. Secondly, it brought the expertise of the many members of the International Federation of Automatic Control (IFAC), who focused their attention on biotechnology at Noordwijkerhout in the Netherlands in December, 1985. I am happy to say that the tradition carries on and a successor meeting will hopefully take place in the USA in 1991. If you find these proceedings useful or stimulating, then we hope to see you there. We set out to make ICCAFT4 a close-knit friendly conference. We housed all who cared to in Robinson College itself and organised no parallel sessions. Because we, the organisers, experience difficulty with the jargon of our colleagues from other disciplines, we asked Bruce Beck to present a breakfast tutorial on modern control and modelling techniques, and we set up informal panel discussions after dinner on two evenings. Neville Fish chaired a forum on the microbiological principles behind models, while Professors Derek Linkens and Ron Leigh led a discussion on expert systems in control.

Download or read book A Textbook of Biotechnology Vol II written by Rehana Khan and published by Firewall Media. This book was released on 2007 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by Elsevier. This book was released on 2014-05-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control of Biotechnological Processes contains the proceedings of the International Federation of Automatic Control's First Symposium on Modeling and Control of Biotechnological Processes held in Noordwijkerhout, The Netherlands, on December 11-13, 1985. The papers explore modeling and control of biotechnological processes such as fermentation and biological wastewater treatment. This book consists of 37 chapters divided into 11 sections and begins with a discussion on the control of fermentation processes; modeling of biotechnical processes; and application of measurement and estimation techniques to biotechnology. The following sections focus on adaptive control theory, applications of adaptive control, and control and modeling of bioreactors. The reader is also introduced to measurement techniques and sensors, with emphasis on pyrolysis mass spectrometry; rapid bioelectrochemical methods; and a self-tuning controller for multiloop controlled fed-batch fermentation. The remaining sections deal with parameter identification and estimation; Kalman filtering techniques; optimization of production processes; modeling of microkinetics; and optimization theory. This monograph will be of interest to researchers and practitioners in the field of biotechnology.

Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.

Download or read book Comprehensive Biotechnology written by and published by Newnes. This book was released on 2011-08-26 with total page 5304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Comprehensive Biotechnology, Six Volume Set continues the tradition of the first inclusive work on this dynamic field with up-to-date and essential entries on the principles and practice of biotechnology. The integration of the latest relevant science and industry practice with fundamental biotechnology concepts is presented with entries from internationally recognized world leaders in their given fields. With two volumes covering basic fundamentals, and four volumes of applications, from environmental biotechnology and safety to medical biotechnology and healthcare, this work serves the needs of newcomers as well as established experts combining the latest relevant science and industry practice in a manageable format. It is a multi-authored work, written by experts and vetted by a prestigious advisory board and group of volume editors who are biotechnology innovators and educators with international influence. All six volumes are published at the same time, not as a series; this is not a conventional encyclopedia but a symbiotic integration of brief articles on established topics and longer chapters on new emerging areas. Hyperlinks provide sources of extensive additional related information; material authored and edited by world-renown experts in all aspects of the broad multidisciplinary field of biotechnology Scope and nature of the work are vetted by a prestigious International Advisory Board including three Nobel laureates Each article carries a glossary and a professional summary of the authors indicating their appropriate credentials An extensive index for the entire publication gives a complete list of the many topics treated in the increasingly expanding field

Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.

Download or read book Control of Biotechnological Processes written by Maya Ignatova and published by LAP Lambert Academic Publishing. This book was released on 2011-04 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the book, contemporary approach for monitoring and control of biotechnological processes on new formalization of process kinetics is presented. The new idea is the substrate kinetics to be considered as fully unknown and time-varying. This new formalization allows avoiding widespread conception for bioprocess models with constant yield coefficients. In practice, the model coefficients of such processes with nonlinear nature and low level of reproducibility are time-varying. Different applications and modifications of the proposed approach are presented. The modifications ensue from the process characteristics - process target product and available information. The present book generalizes the long authors' experience with different bioprocesses in food and pharmaceutical industries, in wastewater treatment as well as for bio-fuels production from renewable sources. It is intended as a graduate level text for students in bioengineering as well as a reference text for scientists and engineers involved in bioprocess control design.

Download or read book Fundamentals of Food Biotechnology written by Byong H. Lee and published by John Wiley & Sons. This book was released on 2014-12-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food biotechnology is the application of modern biotechnological techniques to the manufacture and processing of food, for example through fermentation of food (which is the oldest biotechnological process) and food additives, as well as plant and animal cell cultures. New developments in fermentation and enzyme technological processes, molecular thermodynamics, genetic engineering, protein engineering, metabolic engineering, bioengineering, and processes involving monoclonal antibodies, nanobiotechnology and quorum sensing have introduced exciting new dimensions to food biotechnology, a burgeoning field that transcends many scientific disciplines. Fundamentals of Food Biotechnology, 2nd edition is based on the author’s 25 years of experience teaching on a food biotechnology course at McGill University in Canada. The book will appeal to professional food scientists as well as graduate and advanced undergraduate students by addressing the latest exciting food biotechnology research in areas such as genetically modified foods (GMOs), bioenergy, bioplastics, functional foods/nutraceuticals, nanobiotechnology, quorum sensing and quenching. In addition, cloning techniques for bacterial and yeast enzymes are included in a “New Trends and Tools” section and selected references, questions and answers appear at the end of each chapter. This new edition has been comprehensively rewritten and restructured to reflect the new technologies, products and trends that have emerged since the original book. Many new aspects highlight the short and longer term commercial potential of food biotechnology.

Download or read book Dynamics and Control of Process Systems 2004 written by Sirish Shah and published by Elsevier. This book was released on 2005-06-10 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: