Download or read book Supercritical Water Processing Technologies for Environment Energy and Nanomaterial Applications written by Shuzhong Wang and published by Springer Nature. This book was released on 2019-09-18 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically presents the technical aspects of supercritical water oxidation and supercritical water gasification for energy and environmental applications, which include reactor design, construction materials, corrosion, salt precipitation, etc. The book provides a comprehensive introduction to the properties of supercritical water, and the industrial applications, reaction mechanisms and reaction kinetics of supercritical water oxidation (SCWO) and supercritical water gasification (SCWG). The reactions occurring in supercritical water are complex, and studying their reaction mechanisms is of great importance for the development of supercritical water processing technologies. Accordingly, the book explains the oxidative mechanisms and kinetics of organic matter in supercritical water in detail. However, the harsh reaction conditions in supercritical water can easily create severe reactor corrosion and salt deposition problems. Therefore, the book also comprehensively reports on the mechanism analysis, state of research, and development trends regarding these two problems. Lastly, the book summarizes the development of supercritical water processing technologies, including studies on SCWO and SCWG, as well as near-zero-emission systems of pollutants based on SCWO technology. In short, the book provides a wealth of valuable information for all readers who are interested in using SCWO for organic waste treatment, and in using SCWG for hydrogen production with wet biomass.
Download or read book Near critical and Supercritical Water and Their Applications for Biorefineries written by Zhen Fang and published by Springer. This book was released on 2014-07-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides fundamental chemistry and properties of near-critical water (NCW) and supercritical water (SCW), criteria and challenges/solutions in reactor design for NCW and SCW processes, and up-to-date reviews and practice of a wide range of their applications in bio refineries including: production of hydrochars from biomass, SCW oxidation (SCWO) for waste treatment, SCW gasification (SCWG) of biomass and waste for hydrogen and methane production, hydrothermal liquefaction of biomass, production of chemicals and SCWO of biofuels for energy. It also presents techno-economic analysis of hydrogen production via SCWG of biomass. The book will be highly essential for both academic researchers and industrial practitioners for developing novel bio refinery technologies and processes employing NCW or SCW for treatment of various organic waste streams and production of bio-energy and bio-based chemicals from bio-renewable resources. Prof. Dr. Zhen Fang is leader and founder of biomass group, Xishuangbanna Tropical Botanical Garden, Chinese Academy of Sciences, China. Dr. Chunbao (Charles) Xu is currently an Associate Professor of Chemical Engineering and NSERC/FP Innovations Industrial Research Chair in Forest Bio refinery at Western University, Canada.
Download or read book Contemporary Nanomaterials in Material Engineering Applications written by Nabisab Mujawar Mubarak and published by Springer Nature. This book was released on 2020-12-17 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers remarkable contemporary nanomaterials such as carbon nanomaterials, nanoclays, quantum dots, MXene, and metal-organic frameworks. Each chapter discusses the synthesis techniques, characterization methods, properties, and the nanomaterials’ use in different aspects of biomedical, energy, polymers, material construction, biosensors, coatings, and catalysis. Moreover, commercialization challenges and environmental risks of nanomaterials are also covered in depth. The book provides an understanding of the fundamental properties, limitations and challenges in nanomaterials synthesis, serving as a valuable resource for researchers, graduate students, academicians, and consultants working with nanomaterials for engineering applications.
Download or read book Supercritical Fluid Technology for Energy and Environmental Applications written by Vladimir Anikeev and published by Newnes. This book was released on 2013-12-21 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical Fluid Technology for Energy and Environmental Applications covers the fundamental principles involved in the preparation and characterization of supercritical fluids (SCFs) used in the energy production and other environmental applications. Energy production from diversified resources — including renewable materials — using clean processes can be accomplished using technologies like SCFs. This book is focused on critical issues scientists and engineers face in applying SCFs to energy production and environmental protection, the innovative solutions they have found, and the challenges they need to overcome. The book also covers the basics of sub- and supercritical fluids, like the thermodynamics of phase and chemical equilibria, mathematical modeling, and process calculations. A supercritical fluid is any substance at a temperature and pressure above its critical point where distinct liquid and gas phases do not exist. At this state the compound demonstrates unique properties, which can be "fine-tuned," making them suitable as organic solvents in a range of industrial and laboratory processes. This volume enables readers to select the most appropriate medium for a specific situation. It helps instructors prepare course material for graduate and postgraduate courses in the area of chemistry, chemical engineering, and environmental engineering. And it helps professional engineers learn supercritical fluid-based technologies and use them in solving the increasingly challenging environmental issues. Relates theory, chemical characteristics, and properties of the particular supercritical fluid to its various applications Covers the fundamentals of supercritical fluids, like thermodynamics of phase and chemical equilibria, mathematical modeling, and process calculations Includes the most recent applications of supercritical fluids, including energy generation, materials synthesis, and environmental protection
Download or read book Supercritical Water Oxidation Program SCWOP written by United States. Department of Energy and published by . This book was released on 1994 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrothermal Technology for Nanomaterials Processing written by K. Byrappa and published by Wiley. This book was released on 2010-07-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book will describe various technologies that use pressurized solvents for synthesis and processing of nanomaterials, including hydrothermal, solvothermal and supercritical fluid technologies. Written by two world-renowned experts in the area, the book will provide information on: Pressurized solvents technologies: principles of technologies (hydrothermal, solvothermal, and supercritical fluids), the systems, reactions, established applications; Pressurized solvents technologies in processing of nanomaterials: importance, technological advantages, principles, and system requirements controlling factors: physical, chemical and hydrodynamic factors, thermodynamic principles, solubility and kinetics of crystallization equipment: reactors and reactor design, and safety issues engineering considerations: process design for various applications
Download or read book An Evaluation of Supercritical Water Oxidation Technology written by David Neil Kupferer and published by . This book was released on 2002 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Supercritical Fluid Processing to Environmental Control written by Charles A. Eckert and published by . This book was released on 1991 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: One technology for environmental control and waste remediation which has great potential is contaminant removal and separation with supercritical fluids (SCFs) or supercritical fluid extraction. In order to take advantage of this technology, both a fundamental understanding of phase equilibria and applicable engineering design data are required. This report documents an extensive study into both aspects culminating in the design and economic evaluation of an SCF regeneration process for granular activated carbon. Results include: solubility of model compounds, cosolvent effects on solubility, vapor pressure measurements, spectroscopic measurements, and models for SCF phase equilibria. Charts, tables and graphs.
Download or read book Encyclopedia of Renewable Energy Sustainability and the Environment written by and published by Elsevier. This book was released on 2024-10-01 with total page 4061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable Energy, Sustainability and the Environment, Four Volume Set comprehensively covers all renewable energy resources, including wind, solar, hydro, biomass, geothermal energy, and nuclear power, to name a few. In addition to covering the breadth of renewable energy resources at a fundamental level, this encyclopedia delves into the utilization and ideal applications of each resource and assesses them from environmental, economic, and policy standpoints. This book will serve as an ideal introduction to any renewable energy source for students, while also allowing them to learn about a topic in more depth and explore related topics, all in a single resource. Instructors, researchers, and industry professionals will also benefit from this comprehensive reference. Covers all renewable energy technologies in one comprehensive resource“/li> Details renewable energies’ processes, from production to utilization in a single encyclopedia Organizes topics into concise, consistently formatted chapters, perfect for readers who are new to the field Assesses economic challenges faced to implement each type of renewable energy Addresses the challenges of replacing fossil fuels with renewables and covers the environmental impacts of each renewable energy
Download or read book Chemistry of Advanced Environmental Purification Processes of Water written by Erik Sogaard and published by Newnes. This book was released on 2014-04-11 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Advanced Environmental Purification Processes of Water covers the fundamentals behind a broad spectrum of advanced purification processes for various types of water, showing numerous applications through worked examples. Purification processes for groundwater, soil water, reusable water, and raw water are examined where they are in use full-scale, as a pilot approach, or in the laboratory. This book also describes the production of ceramic particles (nanochemistry) and materials for the creation of filtration systems and catalysts that are involved. Uses chemistry fundamentals to explain the mechanisms behind the various purification processes Explains in detail process equipment and technical applications Describes the production of ceramic particles and other new materials applicable to filtration systems Includes worked examples
Download or read book Synthesis of Nanostructured Materials in Near and or Supercritical Fluids written by Can Erkey and published by Elsevier. This book was released on 2021-11-27 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis of Nanostructured Materials in Near and/or Supercritical Fluids: Methods, Fundamentals and Modeling offers a comprehensive review of the current status of research, development and insights on promising future directions, covering the synthesis of nanostructured materials using supercritical fluid-based processes. The book presents fundamental aspects such as high-pressure phase behavior of complex mixtures, thermodynamics and kinetics of adsorption from supercritical solutions, mechanisms of particle formation phenomena in supercritical fluid-based processes, and models for further development. It bridges the gap between theory and application, and is a valuable resource for scientists, researchers and students alike. Includes thermodynamic and mass transfer data necessary for industrial plant design Explains the mechanisms of reactions in a supercritical fluid environment Lists numerous industrial processes for the production of many consumer products
Download or read book Water Purification written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-12-28 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Purification, a volume in the Nanotechnology in the Food Industry series, provides an in-depth review of the current technologies and emerging application of nanotechnology in drinking water purification, also presenting an overview of the common drinking water contaminants, such as heavy metals, organics, microorganisms, pharmaceuticals, and their occurrences in drinking water sources. As the global water crisis has motivated the industry to look for alternative water supplies, nanotechnology presents significant potential for utilizing previously unacceptable water sources. This books explores the practical methodologies for transforming water using nanotechnologies, and is a comprehensive reference to a wide audience of food science research professionals, professors, and students who are doing research in this field. Includes the most up-to-date information on nanotechnology applications and research methods for water purification and treatment Presents applications of nanotechnology and engineered nanomaterials in drinking water purification to improve efficiency and reduce cost Provides water purification research methods that are important to water quality, including precipitation, adsorption, membrane separation, and ion exchange Covers the potential risks of nanotechnology, such as the toxicological effects of engineered nanomaterials in water and how to minimize risks based on research studies
Download or read book Sustainable Technologies for Water and Wastewater Treatment written by Noel Jacob Kaleekkal and published by CRC Press. This book was released on 2021-07-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Technologies for Water and Wastewater Treatment discusses relevant sustainable technologies for water and wastewater treatment pertaining to a nanoscale approach to water treatment and desalination, membrane-based technologies for water recovery and reuse, the energy and water nexus, degradation of organic pollutants, nascent technologies, bio and bio-inspired materials for water reclamation and integrated systems, and an overview of wastewater treatment plants. The book focuses on advanced topics including in situ generation of hydroxyl radicals, which can aid in the indiscriminate oxidation of any contaminant present in wastewater, making advanced oxidation processes commercially viable. Features: A comprehensive review of current and novel water and wastewater treatment technologies from a sustainability perspective All the sustainable technologies, such as desalination, wastewater treatment, advanced oxidation processes, hydrodynamic cavitation, membrane-based technologies, sonosorption, and electrospun fibers Discussion on reference materials for important research accomplishments in the area of water and environmental engineering Theoretical aspects covering principles and instrumentation A summary on sustainability, including life cycle assessment (LCA), energy balance and large-scale implementation of advanced techniques This book is aimed at professionals, graduate students, and researchers in civil, chemical, environmental engineering, and materials science.
Download or read book Encyclopedia of Chemical Processing and Design written by John J. McKetta Jr and published by CRC Press. This book was released on 1996-06-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical Fluid Technology: Theory and Application to Technology Forecasting
Download or read book Sustainable Energy Water Environment Nexus in Deserts written by Essam Heggy and published by Springer Nature. This book was released on 2022-04-25 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses challenges and opportunities in the Energy-Water-Environment (EWE) nexus, with a particular focus on research and technology development requirements in harsh desert climates. Its chapters include selected contributions presented during the 1st international conference on sustainable Energy-Water-Environment nexus in desert climates (ICSEWEN-19) held at the Qatar Environment and Energy Research Institute (QEERI) in Doha, Qatar in December 2019. This volume is comprised of three main chapters, each describing important case studies and progress on water, energy and environmental questions. A fourth chapter on policies and community outreach on these three areas is also included. This compilation aims to bridge the gap between research and industry to address the socioeconomic impacts of the nexus imbalance as perceived by scientists, industrial partners, and policymakers. The content of this book is of particular importance to graduate students, researchers and decision makers interested in understanding water, energy and environmental challenges in arid areas. Re searchers in environmental and civil engineering, chemistry, hydrology and environmental science can also find unique in-situ observations of the current nexus imbalance in deserts climate to validate their investigations. It is also an invaluable guide for industry professionals working in water, energy, environment and food sectors to understand the rapidly evolving landscape of the EWE nexus in arid areas. The analyses, observations and lessons-learned summarized herein are applicable to other arid areas outside North Africa and the Arabian Peninsula as well, such as central Australia, the southwest of the United States and deserts in central Asia.
Download or read book Emerging Technologies for Nanoparticle Manufacturing written by Jayvadan K. Patel and published by Springer Nature. This book was released on 2021-06-23 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of nanoparticle production methods, scale-up issues drawing attention to industrial applicability, and addresses their successful applications for commercial use. There is a need for a reference book which will address various aspects of recent progress in the methods of development of nanoparticles with a focus on polymeric and lipid nanoparticles, their scale-up techniques, and challenges in their commercialization. There is no consolidated reference book that discusses the emerging technologies for nanoparticle manufacturing. This book focuses on the following major aspects of emerging technologies for nano particle manufacturing. I. Introduction and Biomedical Applications of Nanoparticles II. Polymeric Nanoparticles III. Lipid Nanoparticles IV. Metallic Nanoparticles V. Quality Control for Nanoparticles VI. Challenges in Scale-Up Production of Nanoparticles VII. Injectable Nanosystems VIII. Future Directions and Challenges Leading scientists are selected as chapter authors who have contributed significantly in this field and they focus more on emerging technologies for nanoparticle manufacturing, future directions, and challenges.
Download or read book Supercritical Antisolvent Precipitation Process written by Diego T. Santos and published by Springer Nature. This book was released on 2019-10-12 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides deep insights on the fundamentals, applications and perspectives of the Supercritical AntiSolvent (SAS) Precipitation Process. Chapter 1 provides recent (2013-2018) reports on the use of supercritical CO2 (SC-CO2) antisolvent for micronization, coprecipitation and fractionation of high-value products for the food, cosmetic and pharmaceutical industries. Chapter 2 discusses another variant of the SAS precipitation process called Supercritical fluid extraction of emulsions (SFEE). This chapter provides recent data from 2016-2018 reports investigation of supercritical extraction of emulsions (SFEE) to encapsulate compounds of great interest to the food and non-food industry. Chapter 3 details the design and construction of a SAS Precipitation equipment. Chapter 4 presents experimental results regarding the validation of the supercritical particle formation equipment. Chapter 5 shows the effects of process parameters during particle precipitation using Combined High Turbulence Extraction Assisted by Ultrasound and Supercritical Antisolvent Fractionation (SAF) processes applied to semi-defatted annatto seeds, as a model raw material plant, were investigated. Chapter 6 shows experimental results regarding the process Ultrasound Emulsification Assisted by Nitrogen Hydrostatic Pressure (UEANHP), during the emulsification preparation step of the Supercritical Fluid Extraction of Emulsions (SFEE) process, one of the options of the SAS Precipitation-based process. Finally, Chaptesr 7 and 8 present some perspectives about the economics and process integration with other processes aiming the development of novel conceptual biorefinering approaches for plant materials valorization.