Download or read book Suitability of Viton B O rings for Use in 3000 Psi Hydraulic Systems Containing Petroleum Base Or Phosphate Ester Fluids written by A. E. BARRETT and published by . This book was released on 1961 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results of dynamic performance tests of Viton B O-rings indicate that Viton B O-rings of 70 Shore A hardness with Teflon backup rings will perform satisfactorily at 180 F in 3000 psi hydraulic systems containing phosphate ester fluids. In addition, the results indicate that the O-rings will perform equally as well under these conditions in hydraulic systems containing petroleum base fluids. As reported previously, the Teflon backup rings do not stand up at 300 F under the test conditions. Backup rings made of a 90 Shore A Viton B stock showed even greater wear. (Author).

Download or read book U S Government Research Reports written by and published by . This book was released on 1962 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Suitability of Viton B O rings for Use in 3000 Psi Hydraulic Systems Containing Petroleum Base Fluid Or Cellulube 220 written by R. D. FORD and published by . This book was released on 1961 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efforts were made to develop a performance test for Viton O-rings to be used in 3000 psi hydraulic service. The service fluid may be either petroleum base or Cellulube 220. The test apparatus consisted of a piston with two O-rings which reciprocates 100 times/min in a vertical cylinder o 2.63-in. internal diameter. The piston travel is 1-1/2 in. The cylinder is held at 160 F. Teflon back-up rings are used on the downstream side of the O-rings. The pressure-on cycle lasts for 9 min; the pressure-off cycle lasts for 1 min. Leakage at both ends of the piston is collected. Difficulty was experienced in obtaining reproducible results with this equipment when the criterion was time required for a definite leakage (20 cc) to occur at 3000 psi fluid pressure. The test results show that Viton O-rings seal Cellulube 220 satisfactorily under these conditions and are not damaged by this treatment. The investigation is being continued wit the criterion changed t the number of cycles before the leakage in a 24-hr period exceeds 15 cc for either O-ring. (Author).

Download or read book Lubricants and Lubrication written by Defense Documentation Center (U.S.) and published by . This book was released on 1963 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1961-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bulletin written by BHRA (Association) and published by . This book was released on 1965 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bibliography of Scientific and Industrial Reports written by and published by . This book was released on 1962-10 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book OTS Selective Bibliography written by United States. Dept. of Commerce. Office of Technical Services and published by . This book was released on with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bibliography of Rubber Literature Including Patents written by and published by . This book was released on 1961 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of a Dual Pump motor Hydraulic Accumulator Energy Storage Automobile written by Scott Allen Baum and published by . This book was released on 1987 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machine Design written by and published by . This book was released on 1985 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulics Pneumatics written by and published by . This book was released on 1984 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Jan. 1956 issue includes Fluid power engineering index, 1931-55.

Download or read book Development of a Long Life O ring Compound for Use in Aircraft Hydraulic Systems Using MIL H 5606 Fluids at Pressures Up to 3000 Psi and Temperatures Ranging from 650 to 2750F written by Paul Nenninger and published by . This book was released on 1966 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Tribology Handbook written by Michael J Neale and published by Elsevier. This book was released on 1995-12-15 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The renowned reference work is a practical guide to the selection and design of the components of machines and to their lubrication. It has been completely revised for this second edition by leading experts in the area.

Download or read book Seals and Sealing Handbook written by Ronald Horace Warring and published by . This book was released on 1981 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.

Download or read book Seals and Sealing Handbook written by Robert K. Flitney and published by Elsevier. This book was released on 2014-06-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seals and Sealing Handbook, Sixth Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices.Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failure Guide', the factors to consider should anything go wrong. Building on the practical, stepped approach of its predecessor, Seals and Sealing Handbook, 6th Edition remains an essential reference for any engineer or designer who uses seals in their work. - A comprehensive reference covering a broad range of seal types for all situations, to ensure that you are able to select the most appropriate seal for any given task - Includes supporting case studies and a unique 'Failure Guide' to help you troubleshoot if things go wrong - New edition includes the most up-to-date information on sealing technology, making it an essential reference for anyone who uses seals in their work