Download or read book Technology and Practice in Geotechnical Engineering written by Adeyeri, Joseph B. and published by IGI Global. This book was released on 2014-09-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.
Download or read book Geotechnical Site Characterization written by Paul W. Mayne and published by Taylor & Francis. This book was released on 1998 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Subsurface Conditions written by Michael Shaw Rosenbaum and published by Springer Science & Business Media. This book was released on 2003-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation of the shallow subsurface provides civil, geotechnical and environmental applications with precise definitions of geomechanical and geohydrological properties. Over the past decade, the rapid pace of technological innovation has outstripped the ability of many researchers and potential users to evaluate and adopt promising new characterisation methods. Modern information technologies and information management concepts provide the basis of new paradigms and applications. This book defines future research needs for geological modelling and ground characterisation, including better dialogue between data provides and users and faster, better and less expensive methods for the creation and dissemination of subsurface characterisations.
Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Encyclopedia of Engineering Geology written by Peter T. Bobrowsky and published by Springer. This book was released on 2018-08-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the multi-disciplinary topic of engineering geology and the environment, one of the fastest growing, most relevant and applied fields of research and study within the geosciences. It covers the fundamentals of geology and engineering where the two fields overlap and, in addition, highlights specialized topics that address principles, concepts and paradigms of the discipline, including operational terms, materials, tools, techniques and methods as well as processes, procedures and implications. A number of well known and respected international experts contributed to this authoritative volume, thereby ensuring proper geographic representation, professional credibility and reliability. This superb volume provides a dependable and ready source of information on approximately 300 topical entries relevant to all aspects of engineering geology. Extensive illustrations, figures, images, tables and detailed bibliographic citations ensure that the comprehensively defined contributions are broadly and clearly explained. The Encyclopedia of Engineering Geology provides a ready source of reference for several fields of study and practice including civil engineers, geologists, physical geographers, architects, hazards specialists, hydrologists, geotechnicians, geophysicists, geomorphologists, planners, resource explorers, and many others. As a key library reference, this book is an essential technical source for undergraduate and graduate students in their research. Teachers/professors can rely on it as the final authority and the first source of reference on engineering geology related studies as it provides an exceptional resource to train and educate the next generation of practitioners.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Ground Characterization and Foundations written by C. N. V. Satyanarayana Reddy and published by Springer Nature. This book was released on 2021-09-26 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the Indian Geotechnical Conference (IGC) 2020. The contents focus on recent developments in geotechnical engineering for a sustainable tomorrow. The book covers the topics related to traditional and latest methods in characterisation of ground at construction sites, recent technological developments/ advances in design of shallow and deep foundations in different subsoil conditions.
Download or read book Geotechnical Site Characterization written by Anirban De and published by Momentum Press. This book was released on 2016-03-02 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of site characterization is unique to geotechnical engineering and owes its significance directly to the variability of the natural geologic deposits on the earth’s surface. Proper site characterization requires an understanding of various field and laboratory investigation methods. The book discusses the suitability of various methods under different site conditions and presents the procedures to derive design parameters based on interpretation of test results. Recent developments in specialized site characterization methods (such as seismic hazard evaluation) are also included. Three recent case histories are presented, where site characterization played a key role. The three disparate cases include soft natural soil under static loading, coarse and fine-grained soil under seismic impact, and hazardous waste deposits under both static and seismic loading. Site investigation requirements of building codes are discussed and guidelines for preparing a typical site characterization report are presented. The book is aimed at the practicing geotechnical engineer, as well as advanced undergraduate and graduate students.
Download or read book Contaminants in the Subsurface written by National Research Council and published by National Academies Press. This book was released on 2005-04-23 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: At hundreds of thousands of commercial, industrial, and military sites across the country, subsurface materials including groundwater are contaminated with chemical waste. The last decade has seen growing interest in using aggressive source remediation technologies to remove contaminants from the subsurface, but there is limited understanding of (1) the effectiveness of these technologies and (2) the overall effect of mass removal on groundwater quality. This report reviews the suite of technologies available for source remediation and their ability to reach a variety of cleanup goals, from meeting regulatory standards for groundwater to reducing costs. The report proposes elements of a protocol for accomplishing source remediation that should enable project managers to decide whether and how to pursue source remediation at their sites.
Download or read book Manual on Subsurface Investigations written by and published by . This book was released on 1977 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Drilling Manual written by Australian Drilling Industry Training Committee Limited and published by CRC Press. This book was released on 2015-04-01 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Invaluable Reference for Members of the Drilling Industry, from Owner–Operators to Large Contractors, and Anyone Interested In Drilling Developed by one of the world’s leading authorities on drilling technology, the fifth edition of The Drilling Manual draws on industry expertise to provide the latest drilling methods, safety, risk management, and management practices, and protocols. Utilizing state-of-the-art technology and techniques, this edition thoroughly updates the fourth edition and introduces entirely new topics. It includes new coverage on occupational health and safety, adds new sections on coal seam gas, sonic and coil tube drilling, sonic drilling, Dutch cone probing, in hole water or mud hammer drilling, pile top drilling, types of grouting, and improved sections on drilling equipment and maintenance. New sections on drilling applications include underground blast hole drilling, coal seam gas drilling (including well control), trenchless technology and geothermal drilling. It contains heavily illustrated chapters that clearly convey the material. This manual incorporates forward-thinking technology and details good industry practice for the following sectors of the drilling industry: Blast Hole Environmental Foundation/Construction Geotechnical Geothermal Mineral Exploration Mineral Production and Development Oil and Gas: On-shore Seismic Trenchless Technology Water Well The Drilling Manual, Fifth Edition provides you with the most thorough information about the "what," "how," and "why" of drilling. An ideal resource for drilling personnel, hydrologists, environmental engineers, and scientists interested in subsurface conditions, it covers drilling machinery, methods, applications, management, safety, geology, and other related issues.
Download or read book Site Characterization in Karst and Pseudokarst Terraines written by Richard C. Benson and published by Springer. This book was released on 2015-09-24 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical strategy for obtaining a more complete and accurate geologic site characterization. The strategy and methods to characterize complex geologic settings are readily available. The strategy utilizes readily available technology, basic science and good, old-fashioned common sense resulting in a solid understanding of geologic and even karst or pseudokarst conditions. We provide an introduction to many off-the-shelf methods available for site characterization as well as examples of their application throughout the book. The purpose of a geologic site characterization is to understand the 3-dimensional geologic framework, along with the engineering and hydrologic properties of a site including any man-made impacts. A well-done site characterization is the cornerstone of all geotechnical, groundwater and environmental projects. The geologic conditions, particularly karst conditions, can significantly impact a site including its structural stability, groundwater pathways and potential for rapid transport or traps for contaminants. Once we have adequately characterized the geologic conditions can we carry our remediation, design and construction, model flow, and make risk assessments that are accurate and reliable.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Piezocone and Cone Penetration Test CPTu and CPT Applications in Foundation Engineering written by Abolfazl Eslami and published by Butterworth-Heinemann. This book was released on 2019-11-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezocone and cone penetration tests (CPTu and CPT) applications in foundation engineering includes different approaches for determining the bearing capacity of shallow foundations, along with methods for determining pile bearing capacity and settlement concepts. The use of soft computing (GMDH) neural networks related to CPT records and Geotechnical parameters are also discussed. In addition, different cases regarding the behavior of foundation performance using case records, such as shallow foundation, deep soil improvement, soil behavior classification (SBC), and bearing capacity are also included. - Provides the latest on CPT and CPTu performance in geotechnical engineering, i.e., bearing capacity, settlement, liquefaction, soil classification and shear strength prediction - Introduces soft computing methods for processing soil properties and pile bearing capacity via CPT and CPTu - Explains CPT and CPTu testing methods which allows for the continuous, or virtually continuous, record of ground conditions
Download or read book Geotechnical and Environmental Geophysics Environmental and groundwater written by Stanley H. Ward and published by . This book was released on 1990 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Site Investigation written by CR Clayton and published by Wiley-Blackwell. This book was released on 1995-09-06 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site investigation is the crucial first step in design and construction, when the cost and practicality of a project are evaluated. It is also a necessary part of the investigation of building failures. This major reference work describes the organization of site investigation, the plant, sampling equipment and interpretation of results. The second edition includes new material on specification and procurement, desk studies on geophysics, sample disturbance and sampling methods, in-situ testing and laboratory testing.
Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
