Download or read book Substrate Noise Coupling in RFICs written by Ahmed Helmy and published by Springer Science & Business Media. This book was released on 2008-03-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports modeling and simulation techniques for substrate noise coupling effects in RFICs and introduces isolation structures and design guides to mitigate such effects with the ultimate goal of enhancing the yield of RF and mixed signal SoCs. The book further reports silicon measurements, and new test and noise isolation structures. To the authors’ knowledge, this is the first title devoted to the topic of substrate noise coupling in RFICs as part of a large SoC.

Download or read book Substrate Noise Coupling in Analog RF Circuits written by Stephane Bronckers and published by Artech House. This book was released on 2010 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents case studies to illustrate that careful modeling of the assembly characteristics and layout details is required to bring simulations and measurements into agreement. Engineers learn how to use a proper combination of isolation structures and circuit techniques to make analog/RF circuits more immune to substrate noise. Topics include substrate noise propagation, passive isolation structures, noise couple in active devices, measuring the coupling mechanisms in analog/RF circuits, prediction of the impact of substrate noise on analog/RF circuits, and noise coupling in analog/RF systems.

Download or read book Substrate Noise Coupling in Mixed Signal ASICs written by Stéphane Donnay and published by Springer Science & Business Media. This book was released on 2006-05-31 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first in a series of three dedicated to advanced topics in Mixed-Signal IC design methodologies. It is one of the results achieved by the Mixed-Signal Design Cluster, an initiative launched in 1998 as part of the TARDIS project, funded by the European Commission within the ESPRIT-IV Framework. This initiative aims to promote the development of new design and test methodologies for Mixed-Signal ICs, and to accelerate their adoption by industrial users. As Microelectronics evolves, Mixed-Signal techniques are gaining a significant importance due to the wide spread of applications where an analog front-end is needed to drive a complex digital-processing subsystem. In this sense, Analog and Mixed-Signal circuits are recognized as a bottleneck for the market acceptance of Systems-On-Chip, because of the inherent difficulties involved in the design and test of these circuits. Specially, problems arising from the use of a common substrate for analog and digital components are a main limiting factor. The Mixed-Signal Cluster has been formed by a group of 11 Research and Development projects, plus a specific action to promote the dissemination of design methodologies, techniques, and supporting tools developed within the Cluster projects. The whole action, ending in July 2002, has been assigned an overall budget of more than 8 million EURO.

Download or read book Noise Coupling in System on Chip written by Thomas Noulis and published by CRC Press. This book was released on 2018-01-09 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise Coupling is the root-cause of the majority of Systems on Chip (SoC) product fails. The book discusses a breakthrough substrate coupling analysis flow and modelling toolset, addressing the needs of the design community. The flow provides capability to analyze noise components, propagating through the substrate, the parasitic interconnects and the package. Using this book, the reader can analyze and avoid complex noise coupling that degrades RF and mixed signal design performance, while reducing the need for conservative design practices. With chapters written by leading international experts in the field, novel methodologies are provided to identify noise coupling in silicon. It additionally features case studies that can be found in any modern CMOS SoC product for mobile communications, automotive applications and readout front ends.

Download or read book Analysis and Solutions for Switching Noise Coupling in Mixed Signal ICs written by X. Aragones and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern microelectronic design is characterized by the integration of full systems on a single die. These systems often include large high performance digital circuitry, high resolution analog parts, high driving I/O, and maybe RF sections. Designers of such systems are constantly faced with the challenge to achieve compatibility in electrical characteristics of every section: some circuitry presents fast transients and large consumption spikes, whereas others require quiet environments to achieve resolutions well beyond millivolts. Coupling between those sections is usually unavoidable, since the entire system shares the same silicon substrate bulk and the same package. Understanding the way coupling is produced, and knowing methods to isolate coupled circuitry, and how to apply every method, is then mandatory knowledge for every IC designer. Analysis and Solutions for Switching Noise Coupling in Mixed-Signal ICs is an in-depth look at coupling through the common silicon substrate, and noise at the power supply lines. It explains the elementary knowledge needed to understand these phenomena and presents a review of previous works and new research results. The aim is to provide an understanding of the reasons for these particular ways of coupling, review and suggest solutions to noise coupling, and provide criteria to apply noise reduction. Analysis and Solutions for Switching Noise Coupling in Mixed-Signal ICs is an ideal book, both as introductory material to noise-coupling problems in mixed-signal ICs, and for more advanced designers facing this problem.

Download or read book Substrate Noise written by Edoardo Charbon and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, substrate noise has had a constant and significant impact on the design of analog and mixed-signal integrated circuits. Only recently, with advances in chip miniaturization and innovative circuit design, has substrate noise begun to plague fully digital circuits as well. To combat the effects of substrate noise, heavily over-designed structures are generally adopted, thus seriously limiting the advantages of innovative technologies. Substrate Noise: Analysis and Optimization for IC Design addresses the main problems posed by substrate noise from both an IC and a CAD designer perspective. The effects of substrate noise on performance in digital, analog, and mixed-signal circuits are presented, along with the mechanisms underlying noise generation, injection, and transport. Popular solutions to the substrate noise problem and the trade-offs often debated by designers are extensively discussed. Non-traditional approaches as well as semi-automated techniques to combat substrate noise are also addressed. Substrate Noise: Analysis and Optimization for IC Design will be of interest to researchers and professionals interested in signal integrity, as well as to mixed signal and RF designers.

Download or read book Noise Coupling in System on Chip written by Thomas Noulis and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Noise Coupling is the root-cause of the majority of Systems on Chip (SoC) product fails. The book discusses a breakthrough substrate coupling analysis flow and modelling toolset, addressing the needs of the design community. The flow provides capability to analyze noise components, propagating through the substrate, the parasitic interconnects and the package. Using this book, the reader can analyze and avoid complex noise coupling that degrades RF and mixed signal design performance, while reducing the need for conservative design practices. With chapters written by leading international experts in the field, novel methodologies are provided to identify noise coupling in silicon. It additionally features case studies that can be found in any modern CMOS SoC product for mobile communications, automotive applications and readout front ends."--Provided by publisher.

Download or read book Parasitic Substrate Coupling in High Voltage Integrated Circuits written by Pietro Buccella and published by Springer. This book was released on 2018-03-14 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a new approach to model and predict substrate parasitic failures in integrated circuits with standard circuit design tools. The injection of majority and minority carriers in the substrate is a recurring problem in smart power ICs containing high voltage, high current switching devices besides sensitive control, protection and signal processing circuits. The injection of parasitic charges leads to the activation of substrate bipolar transistors. This book explores how these events can be evaluated for a wide range of circuit topologies. To this purpose, new generalized devices implemented in Verilog-A are used to model the substrate with standard circuit simulators. This approach was able to predict for the first time the activation of a latch-up in real circuits through post-layout SPICE simulation analysis. Discusses substrate modeling and circuit-level simulation of parasitic bipolar device coupling effects in integrated circuits; Includes circuit back-annotation of the parasitic lateral n-p-n and vertical p-n-p bipolar transistors in the substrate; Uses Spice for simulation and characterization of parasitic bipolar transistors, latch-up of the parasitic p-n-p-n structure, and electrostatic discharge (ESD) protection devices; Offers design guidelines to reduce couplings by adding specific protections.

Download or read book Handbook of 3D Integration Volume 4 written by Paul D. Franzon and published by John Wiley & Sons. This book was released on 2019-01-25 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of the landmark handbook focuses on the design, testing, and thermal management of 3D-integrated circuits, both from a technological and materials science perspective. Edited and authored by key contributors from top research institutions and high-tech companies, the first part of the book provides an overview of the latest developments in 3D chip design, including challenges and opportunities. The second part focuses on the test methods used to assess the quality and reliability of the 3D-integrated circuits, while the third and final part deals with thermal management and advanced cooling technologies and their integration.

Download or read book Built in Self Test and Digital Self Calibration for RF SoCs written by Sleiman Bou-Sleiman and published by Springer Science & Business Media. This book was released on 2011-09-23 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will introduce design methodologies, known as Built-in-Self-Test (BiST) and Built-in-Self-Calibration (BiSC), which enhance the robustness of radio frequency (RF) and millimeter wave (mmWave) integrated circuits (ICs). These circuits are used in current and emerging communication, computing, multimedia and biomedical products and microchips. The design methodologies presented will result in enhancing the yield (percentage of working chips in a high volume run) of RF and mmWave ICs which will enable successful manufacturing of such microchips in high volume.

Download or read book Analysis and Design of Quadrature Oscillators written by Luis B. Oliveira and published by Springer Science & Business Media. This book was released on 2008-07-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern RF receivers and transmitters require quadrature oscillators with accurate quadrature and low phase-noise. Existing literature is dedicated mainly to single oscillators, and is strongly biased towards LC oscillators. This book is devoted to quadrature oscillatorsand presents adetailed comparative study ofLC and RCosc- lators, both at architectural and at circuit levels. It is shown that in cross-coupled RC oscillators both the quadrature error and phase-noise are reduced, whereas in LC - cillators the coupling decreases the quadrature error, but increases the phase-noise. Thus, quadrature RC oscillators can be a practical alternative to LC oscillators, - pecially when area and cost are to be minimized. The main topics of the book are: cross-coupled LC quasi-sinusoidal oscillators, cross-coupled RC relaxation oscillators, a quadrature RC oscillator-mixer, and t- integrator oscillators. The effect of mismatches on the phase-error and the pha- noise are thoroughly investigated. The book includes many experimental results, obtained from different integrated circuit prototypes, in the GHz range. A structured design approach is followed: a technology independent study, with ideal blocks, is performed initially, and then the circuit level design is addressed. This book can be used in advanced courses on RF circuit design. In addition to post-graduate students and lecturers, this book will be of interest to design engineers and researchers in this area.

Download or read book Structured Analog CMOS Design written by Danica Stefanovic and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structured Analog CMOS Design describes a structured analog design approach that makes it possible to simplify complex analog design problems and develop a design strategy that can be used for the design of large number of analog cells. It intentionally avoids treating the analog design as a mathematical problem, developing a design procedure based on the understanding of device physics and approximations that give insight into parameter interdependences. The basic design concept consists in analog cell partitioning into the basic analog structures and sizing of these basic analog structures in a predefined procedural design sequence. The procedural design sequence ensures the correct propagation of design specifications, the verification of parameter limits and the local optimization loops. The proposed design procedure is also implemented as a CAD tool that follows this book.

Download or read book Low Power UWB CMOS Radar Sensors written by Hervé Paulino and published by Springer Science & Business Media. This book was released on 2008-04-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power UWB CMOS Radar Sensors deals with the problem of designing low cost CMOS radar sensors. The radar sensor uses UWB signals in order to obtain a reasonable target separation capability, while maintaining a maximum signal frequency below 2 GHz. This maximum frequency value is well within the reach of current CMOS technologies. The use of UWB signals means that most of the methodologies used in the design of circuits and systems that process narrow band signals, can no longer be applied. Low Power UWB CMOS Radar Sensors provides an analysis between the interaction of UWB signals, the antennas and the processing circuits. This analysis leads to some interesting conclusions on the types of antennas and types of circuits that should be used. A methodology to compare the noise performance of UWB processing circuits is also derived. This methodology is used to analyze and design the constituting circuits of the radar transceiver. In order to validate the design methodology a CMOS prototype is designed and experimentally evaluated.

Download or read book Advanced Circuits for Emerging Technologies written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book will address the-state-of-the-art in integrated circuit design in the context of emerging systems. New exciting opportunities in body area networks, wireless communications, data networking, and optical imaging are discussed. Emerging materials that can take system performance beyond standard CMOS, like Silicon on Insulator (SOI), Silicon Germanium (SiGe), and Indium Phosphide (InP) are explored. Three-dimensional (3-D) CMOS integration and co-integration with sensor technology are described as well. The book is a must for anyone serious about circuit design for future technologies. The book is written by top notch international experts in industry and academia. The intended audience is practicing engineers with integrated circuit background. The book will be also used as a recommended reading and supplementary material in graduate course curriculum. Intended audience is professionals working in the integrated circuit design field. Their job titles might be : design engineer, product manager, marketing manager, design team leader, etc. The book will be also used by graduate students. Many of the chapter authors are University Professors.

Download or read book Omnidirectional Inductive Powering for Biomedical Implants written by Bert Lenaerts and published by Springer Science & Business Media. This book was released on 2008-10-14 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Omnidirectional Inductive Powering for Biomedical Implants investigates the feasibility of inductive powering for capsule endoscopy and freely moving systems in general. The main challenge is the random position and orientation of the power receiving system with respect to the emitting magnetic field. Where classic inductive powering assumes a predictable or fixed alignment of the respective coils, the remote system is now free to adopt just any orientation while still maintaining full power capabilities. Before elaborating on different approaches towards omnidirectional powering, the design and optimisation of a general inductive power link is discussed in all its aspects. Special attention is paid to the interaction of the inductive power link with the patient’s body. Putting theory into practice, the implementation of an inductive power link for a capsule endoscope is included in a separate chapter.

Download or read book Low Power High Speed ADCs for Nanometer CMOS Integration written by Zhiheng Cao and published by Springer Science & Business Media. This book was released on 2008-07-15 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power High-Speed ADCs for Nanometer CMOS Integration is about the design and implementation of ADC in nanometer CMOS processes that achieve lower power consumption for a given speed and resolution than previous designs, through architectural and circuit innovations that take advantage of unique features of nanometer CMOS processes. A phase lock loop (PLL) clock multiplier has also been designed using new circuit techniques and successfully tested. 1) A 1.2V, 52mW, 210MS/s 10-bit two-step ADC in 130nm CMOS occupying 0.38mm2. Using offset canceling comparators and capacitor networks implemented with small value interconnect capacitors to replace resistor ladder/multiplexer in conventional sub-ranging ADCs, it achieves 74dB SFDR for 10MHz and 71dB SFDR for 100MHz input. 2) A 32mW, 1.25GS/s 6-bit ADC with 2.5GHz internal clock in 130nm CMOS. A new type of architecture that combines flash and SAR enables the lowest power consumption, 6-bit >1GS/s ADC reported to date. This design can be a drop-in replacement for existing flash ADCs since it does require any post-processing or calibration step and has the same latency as flash. 3) A 0.4ps-rms-jitter (integrated from 3kHz to 300MHz offset for >2.5GHz) 1-3GHz tunable, phase-noise programmable clock-multiplier PLL for generating sampling clock to the SAR ADC. A new loop filter structure enables phase error preamplification to lower PLL in-band noise without increasing loop filter capacitor size.

Download or read book Nanometer CMOS RFICs for Mobile TV Applications written by Ahmed A. Youssef and published by Springer Science & Business Media. This book was released on 2010-06-17 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanometer CMOS RFICs for Mobile TV Applications focuses on how to break the trade-off between power consumption and performance (linearity and noise figure) by optimizing the mobile TV front-end dynamic range in three hierarchical levels: the intrinsic MOSFET level, the circuit level, and the architectural level. It begins by discussing the fundamental concepts of MOSFET dynamic range, including nonlinearity and noise. It then moves to the circuit level introducing the challenges associated with designing wide-dynamic range, variable-gain, broadband low-noise amplifiers (LNAs). The book gives a detailed analysis of a new noise-canceling technique that helps CMOS LNAs achieve a sub - 2 dB wideband noise figure. Lastly, the book deals with the front-end dynamic range optimization process from the systems perspective by introducing the active and passive automatic gain control (AGC) mechanism.