Download or read book Study Task for Determining the Effects of Boost Phase Environments on Densified Propellants Thermal Conditions for Expendable Launch Vehicles written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-17 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thermodynamic study has been conducted that investigated the effects of the boost-phase environment on densified propellant thermal conditions for expendable launch vehicles. Two thermodynamic models were developed and utilized to bound the expected thermodynamic conditions inside the cryogenic liquid hydrogen and oxygen propellant tanks of an Atlas IIAS/Centaur launch vehicle during the initial phases of flight. The ideal isentropic compression model was developed to predict minimum pressurant gas requirements. The thermal equilibrium model was developed to predict the maximum pressurant gas requirements. The models were modified to simulate the required flight tank pressure profiles through ramp pressurization, liquid expulsion, and tank venting. The transient parameters investigated were: liquid temperature, liquid level, and pressurant gas consumption. Several mission scenarios were analyzed using the thermodynamic models, and the results indicate that flying an Atlas IIAS launch vehicle with densified propellants is feasible and beneficial but may require some minor changes to the vehicle.Haberbusch, Mark S. and Meyer, Michael L. (Technical Monitor)Glenn Research CenterROCKET PROPELLANTS; PROPELLANT TANKS; FUEL TANK PRESSURIZATION; PRESSURIZING; THERMODYNAMICS; SIMULATION; ATLAS CENTAUR LAUNCH VEHICLE; DENSIFICATION; TRAJECTORY ANALYSIS
Download or read book Study Task for Determining the Effects of Boost Phase Environments on Densified Propellants Thermal Conditions for Expendable Launch Vehicles written by and published by . This book was released on 2002 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 36th AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit 2000 3750 2000 3799 written by and published by . This book was released on 2000 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Influence of Structure and Material Research on Advanced Launch Systems Weight Performance and Cost written by J. A. Boddy and published by . This book was released on 1968 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power on Effects on an Expendable Launch Vehicle written by Lie-Mine Gea and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boost Phase written by and published by . This book was released on 2006 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Taming Liquid Hydrogen written by Virginia Parker Dawson and published by . This book was released on 2004 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerothermodynamics of Gas Turbine and Rocket Propulsion written by Gordon C. Oates and published by AIAA. This book was released on 1997 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of Space Security written by David Wright and published by . This book was released on 2005 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Review of United States Air Force and Department of Defense Aerospace Propulsion Needs written by National Research Council and published by National Academies Press. This book was released on 2007-01-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocket and air-breathing propulsion systems are the foundation on which planning for future aerospace systems rests. A Review of United States Air Force and Department of Defense Aerospace Propulsion Needs assesses the existing technical base in these areas and examines the future Air Force capabilities the base will be expected to support. This report also defines gaps and recommends where future warfighter capabilities not yet fully defined could be met by current science and technology development plans.
Download or read book Guidelines and Metrics for Assessing Space System Cost Estimates written by Bernard Fox and published by RAND Corporation. This book was released on 2008 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Introduction / 2. Space system fundamentals / 3. Reviewing a cost estimate / 4. Space vehicle cost crosschecks / 5. Common issues in estimating space programs / 6. Resources for space system cost estimation / 7. Recommendations.
Download or read book Report of the Presidential Commission on the Space Shuttle Challenger Accident written by DIANE Publishing Company and published by DIANE Publishing. This book was released on 1995-07 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reusable Launch Vehicle written by Committee on Reusable Launch Vehicle Technology and Test Program and published by National Academies Press. This book was released on 1996-01-22 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key to opening the use of space to private enterprise and to broader public uses lies in reducing the cost of the transportation to space. More routine, affordable access to space will entail aircraft-like quick turnaround and reliable operations. Currently, the space Shuttle is the only reusable launch vehicle, and even parts of it are expendable while other parts require frequent and extensive refurbishment. NASA's highest priority new activity, the Reusable Launch Vehicle program, is directed toward developing technologies to enable a new generation of space launchers, perhaps but not necessarily with single stage to orbit capability. This book assesses whether the technology development, test and analysis programs in propulsion and materials-related technologies are properly constituted to provide the information required to support a December 1996 decision to build the X-33, a technology demonstrator vehicle; and suggest, as appropriate, necessary changes in these programs to ensure that they will support vehicle feasibility goals.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Living and Working in Space written by William David Compton and published by Courier Corporation. This book was released on 2013-05-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The official record of America's first space station, this book from the NASA History Series chronicles the Skylab program from its planning during the 1960s through its 1973 launch and 1979 conclusion. Definitive accounts examine the project's achievements as well as its use of discoveries and technology developed during the Apollo program. 1983 edition.
Download or read book Evolved Expendable Launch Vehicle EELV Program written by and published by . This book was released on 1998 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Field Artillery Manual Cannon Gunnery written by Department of the Army and published by . This book was released on 2017-08-19 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training Circular (TC) 3-09.81, "Field Artillery Manual Cannon Gunnery," sets forth the doctrine pertaining to the employment of artillery fires. It explains all aspects of the manual cannon gunnery problem and presents a practical application of the science of ballistics. It includes step-by-step instructions for manually solving the gunnery problem which can be applied within the framework of decisive action or unified land operations. It is applicable to any Army personnel at the battalion or battery responsible to delivered field artillery fires. The principal audience for ATP 3-09.42 is all members of the Profession of Arms. This includes field artillery Soldiers and combined arms chain of command field and company grade officers, middle-grade and senior noncommissioned officers (NCO), and battalion and squadron command groups and staffs. This manual also provides guidance for division and corps leaders and staffs in training for and employment of the BCT in decisive action. This publication may also be used by other Army organizations to assist in their planning for support of battalions. This manual builds on the collective knowledge and experience gained through recent operations, numerous exercises, and the deliberate process of informed reasoning. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security.
