Download or read book Study on Mixing Modelling and Control of an SCR System written by Xinna Tian and published by . This book was released on 2016 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, more and more research attention has been paid to the NOx emissions caused by marine diesel engines. Selective catalytic reduction (SCR) system has been proven to be an effective technology for the removal of NOx emitted from marine diesel engines. In order to comply with stringent International Maritime Organization (IMO) Tier III NOx emission regulations, a number of engine manufacturers have developed their own SCR systems with an option of installing SCR reactors before or after the turbines of engine turbochargers. This thesis focuses on modelling of evaporation and decomposition of urea-water-solution (UWS) droplets, design and optimisation of static mixers, modelling of an SCR reactor and developing model-based urea dosing control strategy.The amount of ammonia converted from UWS has a significant effect on the NOx removal efficiency of SCR systems. Due to a limited installation space for SCR systems on board, choosing the location of urea injection nozzle appropriately has become a critical issue for SCR system design. An evaporation and decomposition model of UWS droplets has been developed in this research in order to determine the total depletion time of a UWS droplet, which is helpful to calculate the proper length between the urea nozzle and reactor of an SCR system.In order to achieve a high NOx removal rate and reduce the quantity of NH3 slip, static mixers are commonly used before SCR reactors to improve the mixing between ammonia and exhaust gases. 4 novel static mixers have been designed and the performance of the mixers is compared in the study. An experiment has been conducted to validate the mixing performance and pressure loss of the static mixers developed. It shows that there is a satisfied agreement between the simulation and experiment results.A mathematical model of SCR reactors has been established. The unknown parameters of the model are identified by minimising the error between the model predicted and measured values of both the temperature and the species concentration after the SCR reactor. The SCR reactor model is further used in a simulation for the purpose of developing model-based urea dosing control strategies.A state observer is used to determine the actual states in the reactor which supplies the mandatory information for developing model-based urea dosing control strategies. The NH3 cross-sensitivity of NOx sensors can be described by a linear equation. The simulation results of the observer show that the NH3 cross-sensitivity of NOx sensors can be neglected when estimating the actual states of the reactor if NH3 is of a low concentration in the exhaust.
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Frontier Computing written by Jason C. Hung and published by Springer Nature. This book was released on 2022-05-23 with total page 1877 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 11th International Conference on Frontier Computing, held in Seoul, on July 13–17, 2021, and provides comprehensive coverage of the latest advances and trends in information technology, science, and engineering. It addresses a number of broad themes, including communication networks, business intelligence and knowledge management, Web intelligence, and related fields that inspire the development of information technology. The respective contributions cover a wide range of topics: database and data mining, networking and communications, Web and Internet of things, embedded systems, soft computing, social network analysis, security and privacy, optical communication, and ubiquitous/pervasive computing. Many of the papers outline promising future research directions, and the book benefits students, researchers, and professionals alike. Further, it offers a useful reference guide for newcomers to the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spray Wall Interaction Modelling by Dimensionless Data Analysis written by Dominik Kuhnke and published by . This book was released on 2004 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Revolution and Chemical Research written by Kok-Keong Chong and published by CRC Press. This book was released on 2022-12-08 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of the book is to promote research and developmental activities in energy, power technology and chemical technology. Besides, it aims to promote scientific information interchange between scholars from top universities, business associations, research centers and high-tech enterprises working all around the world. The conference conducted in-depth exchanges and discussions on relevant topics such as energy engineering and chemical engineering, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of energy materials, energy equipment and electrochemistry. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world comprehend the academic development trends and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993-08 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index Medicus written by and published by . This book was released on 2001-05 with total page 1828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Chemical Processing and Design Volume 69 Supplement 1 written by Rayford Anthony and published by CRC Press. This book was released on 2001-12-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 69th volume presents information on circulating fluidized bed reactors and looks at subjects ranging from basic concepts and hydrodynamics to structure, properties and applications of polyolefines produced by single-site catalyst technology.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Hydraulic and Civil Engineering Technology VI written by M. Yang and published by IOS Press. This book was released on 2021-11-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies, such as improved testing and physical modeling methods, together with numerical studies and other novel techniques, have led to many developments in the fields of hydraulic and civil engineering in recent years. This book presents proceedings from HCET 2021, the 6th International Technical Conference on Frontiers of Hydraulic and Civil Engineering Technology, held in Sanya, China, on 28 and 29 August 2021. The conference highlighted the latest advances, innovations and applications in the fields of hydraulic and civil engineering, and served as a platform to promote and celebrate interdisciplinary study. The book contains 89 papers, selected from 178 contributions and divided into 4 sections: Modern Civil Engineering; Water and Hydraulic Engineering; Environment Engineering and Sciences; and Transdisciplinary Engineering and Technology. Topics covered involve both theoretical and practical knowledge and understanding, primarily in the areas of hydraulics and water resource engineering, civil engineering, environmental engineering and sciences, transportation engineering, coastal and ocean engineering and transdisciplinary engineering and technology. The book, which presents a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among specialists in various fields, will be of interest to all academics, researchers, practitioners and policymakers seeking to understand and tackle civil and hydraulic engineering challenges by adopting appropriate, sustainable, solutions.
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Download or read book Perovskites and Related Mixed Oxides written by Pascal Granger and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook and ready reference details all the main achievements in the field of perovskite-based and related mixed-oxide materials. The authors discuss, in an unbiased manner, the potentials as well as the challenges related to their use, thus offering new perspectives for research and development on both an academic and industrial level. The first volume begins by summarizing the different synthesis routes from molten salts at high temperatures to colloidal crystal template methods, before going on to focus on the physical properties of the resulting materials and their related applications in the fields of electronics, energy harvesting, and storage as well as electromechanics and superconductivity. The second volume is dedicated to the catalytic applications of perovskites and related mixed oxides, including, but not limited to total oxidation of hydrocarbons, dry reforming of methane and denitrogenation. The concluding section deals with the development of chemical reactors and novel perovskite-based applications, such as fuel cells and high-performance ceramic membranes. Throughout, the contributions clearly point out the intimate links between structure, properties and applications of these materials, making this an invaluable tool for materials scientists and for catalytic and physical chemists.
Download or read book Predictive Modelling for Energy Management and Power Systems Engineering written by Ravinesh Deo and published by Elsevier. This book was released on 2020-09-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Modeling for Energy Management and Power Systems Engineering introduces readers to the cutting-edge use of big data and large computational infrastructures in energy demand estimation and power management systems. The book supports engineers and scientists who seek to become familiar with advanced optimization techniques for power systems designs, optimization techniques and algorithms for consumer power management, and potential applications of machine learning and artificial intelligence in this field. The book provides modeling theory in an easy-to-read format, verified with on-site models and case studies for specific geographic regions and complex consumer markets. Presents advanced optimization techniques to improve existing energy demand system Provides data-analytic models and their practical relevance in proven case studies Explores novel developments in machine-learning and artificial intelligence applied in energy management Provides modeling theory in an easy-to-read format
